The delivery tray operates with a conveyor belt controlled by an electronic stop/run circuit. The delivered material is fed through a delivery tunnel. Upon the stop signal the tunnel puts the material into the delivery tray. The delivery tray runs independently of any external signals can therefore be combined with almost any wire stripping or cutting machine. The output side allows delivery of pieces that are longer than the overall length of the tray. Supplied in lenghts from 1.5m to 18m, also special stackers are avaliable upon request.

Specification
Length From 1.5 – 18mts
In feed Height (Min) 900mm
In feed Height (Max) 1100mm
Cable Length (Min) 500mm
Cable Length (Max) 18000mm
Cable Diameter (Min) 0.5mm sq
Cable Diameter (Max) 19mm sq
Speed (Max) 3 Metres Per Second
Power Supply Single Phase 230V 50Hz 6A
Air Pressure 6 bar
Picture is the AL 1500 Ring for other and special sizes.

Contact;
Ulmer GmbH
Auf den Luppen
D-35745 Herborn Horbach
Tel; +49 2772 51000
Fax; +49 2772 51677

Tags : cable, cable diameter, conveyor belt, external signals, Height, height max, length max, material, range, stop

Similar equipment products

• Series 9000 Mini Reels
  These reels feature a shock resistant plastic case and include a ratchet stop device every 50cm which can be easily removed if constant traction of the cable is required. Sliprings have brass rings and bushes and protection degree is IP42 as standard...
• PreFeeder 2200, free-standing, electrical prefeeding machine
  Description The PreFeeder 2200 is a free-standing, electrical prefeeding machine designed to pull wire and cable from reels weighing up to 50 kg (110 lbs.). Technical Info: Cable Diameter 15 mm (0.60”) Stacking Concept n/a Dereeling Co...
• Cable cutting and stripping machine Kappa 320
  Description Cable cutting and stripping machine Kappa 320 Power, performance and a new type of sensors are the three key features of the fully automatic Kappa cutting and stripping machines. Simple, intuitive controls allow these machines to be...
• Qualitative range of mould temperature controllers
  Description We supply a qualitative range of mould temperature controllers that are manufactured by us using optimum grade raw material. These are specifically designed to maintain invariant temperature of mould during the entire moulding proces...
• Double-shaft hammer crusher
  Description Double-shaft hammer crusher Sizes 1.800 x 1.800 2.200 x 2.000 2.500 x 2.800 3.000 x 3.000 The sales activities concentrate on: Complete rolling mills and rolling mill equipment, Cable making and stranding machines, Crushing ...