Outdoor Fitness/Elliptical Cross Trainer GYX-F16
Shot blast blasting equipment: To clean the rust.
Electrostatic powder coating technics: To process the pipe surface.
Pipe Thickness: 3.0mm
Nuts: Stainless Steel Nuts
Accessories: Hot Galvanized
Bearings: Made from Japan
Surface Treating for normal climate: Twice plastic powder coated.
Surface Treating for wet climate: First “zinc-powder” coated, then plastic powder coated.
Attention: People with bad lumbar is not permitted to use the equipment. The patients must ask the doctors for permission before using it. If feel any sick when training, you should stop immediately and consult with the doctors. The patient and children should be accompanied when using it.
Sanhe City Guiyuxing Sporting Goods Co., Ltd.
Xiaoxing Village, Qixinzhuang Town, Sanhe City, Langfang, Hebei, China
Zip/Postal Code: 065200
Telephone Number: 86-316-3723108
Fax Number: 86-316-3720333
Landscape Fitness (Umbrella Structure) -Elliptical Trainer JMA-07. Outdoor fitness equipment, fitness equipment, outdoor equipment, sporting goods, sports equipment, park equipment
Aparatos de gimnasia al aire libre
*Shot blasting machine: To clean the rust.
*Electrostatic powder coating technics: To process the pipe surface.
*Bearing Assembly: Hydraulic assembly machine
*Surface Treating for wet climate: First Pure Epoxy Powder coated, then molding powder coated
*Shipment Term: CIF / FOB XINGANG, Chin
Function Developing the strength of muscles in four limbs and waist; Strengthening cardiac and pneumonic function, and improving the coordination Between four limbs
Approaches Put your feet on the pedals, hold the handles with your both hands and moving your hands and feet alternately.
Dachang Hui Autonomous County Xiadian Jiamei Sporting Goods Co., Ltd.
Dachang Nationality Industrial Park, Hebei, China
Zip/Postal Code: 065301
Telephone Number: 86-316-8861628
Fax Number: 86-316-8862996
Matfer commercial chocolate tempering machine
This chocolate dipper is equipped with a 12″ diam. rotating disk bringing the tempered chocolate to the nozzle standing 8″ above the surface
Delivers a continuous flow of chocolate, eliminating the need for ladles and spoons
Can melt up to 33lbs. of chocolate
Very accurate thermostat maintains the chocolate at the right temperature
Slotted lid and spatula included
100 Volts, 300 Watts
Machine dimensions: 21-1/4″ long, 14″ wide, 9-1/2″ high (without the wheel)
Used only for demo, otherwise like new
MATFER BOURGEAT USA, Inc.
16150 Lindbergh Street
Van Nuys, CA
Fax Orders To : (818) 782-0799
Tel : (818)782-0792
Fax : (818)782-0799
Customers : (800) 766-0333
Email : email@example.com
Hours of Operations:
M-F – 7 am – 4:30 pm Pacific Standard Time
Precise Sliding Table Saw D
1) It is suitable to multiple kinds of board structure.
2) Higher-order orientation.
3) No deformation.
4) Beautiful surface and wear-resistant.
Hangzhou Xianta Trade Co., Ltd.
No. 97 Yongxiang Street, Hangzhou, Zhejiang, China
Zip/Postal Code: 310022
Telephone Number: 86-571-87813721
Fax Number: 86-571-87813721
Vacuum Calibration Tank Model NO.: 3000A
Profile vacuum calibration cooling device has the function of stabilize and adjust profile shape, so ensure the product size accuracy, surface smooth, The cooling calibration unit decide the product size accuracy, also it is a very important parameter of the extrusion speed.
1. The corpus material adopt the import SUS304 stainless steel.
2. The corpus material adopt import SUS304 stainless steel.
3. The main calibration section adopt brass, steel or aluminum to reduce the friction of pipe and calibration body wall, avoid abrasion.
4. Adopts the high precision water-loop vacuum pump, low noise and stability.
5. Vacuum passage arranged with blind side and stock forms, making calibration self-regulating.
6. The cooling is through water bath cooling or spray cooling to make the heat value high of the transmit, cooling even.
7. Adopt the short calibration vacuum sleeve to calibrate, make the profile of complex surface shape forming accurate.
8. The tank can be adjust 3D with electronic, easy operation in the producing.
Zhangjiagang City Qiangsheng Machinery Co., Ltd.
Sanxing Iudustrial Zone, Zhangjiagang, Suzhou, Jiangsu, China
Zip/Postal Code: 215600
Telephone Number: 86-512-58535228
Fax Number: 86-512-58535268
Pharma-Master Jet Mill. The Pharma-Master is an enhanced version of the Micron-Master, specifically designed to comply with USDA standards. It is 3D CAD designed to assure refined assembly, featuring enhanced ease of use, surface finish, and cleanability. Product contact surfaces and FDA-grade O-Rings comply with 3-A Sanitary standards. The mill features all 316L construction and, where necessary, machined one-piece construction to meet stringent USDA standards. The Pharma-Master is available in 1-, 2-, 4-, 8-, 12-, and 15-in. sizes. It is capable of grinding any crystalline or friable material, from talc to diamond, efficiently and quickly, with virtually no contamination or attritional heat.
The Jet Pulverizer Company, Inc.,
1255 N. Church St.
Moorestown, New Jersey 08057
Lab Rubber Mixing Mills, Water Cooling Mixing Mills, Mixer Machine. Water Cooling Lab Rubber Mixing Mills are just like mixing mills but they are smaller in size. The rollers of lab mixing mill are made of cast iron rollers and possesses a good surface hardness. The rollers of lab mixing mills are cooled by water and heated by the steam inside.Or simply heated by electricity. The mill has low operating cost and low power consumption. It is easy to install and its compact leaving space for maximum floor utilization.
Our Products:Rubber Plate Vulcanizer,Rubber Mixing Mill,Rubber Slitter,Rubber Extruder,Roll Calender,EVA Foaming Press,Rubber Cutting Machine,Rubber-Plastic products Making Line,Waste Tyre Processing Machine,Rubber Powder Producing Machine ect..
Qingdao Xincheng Yiming Rubber Machinery Co.,Ltd
huangshan economic zone,Jiaonan city,Qingdao,China
City/Province: qingdao Shandong
Zip/Postal Code: 266424
phone: +86 532 83121822
fax: +86 532 83122277
Double Drum Hand Road Roller. Mainly used to RAM the asphalt surface and gravel, sandy soil.
1) Good engine, quality assurance, superior performance, easy operate.
2) Small operating radius, can work within small area.
3) Adopts America EATON static hydraulic drive device with stepless speed regulation, reverts conveniently and long life.
4) Self-locking reverting mechanism, make sure reverting easily and operating conveniently.
5) Stainless steel water sprinkling pipe with filtering net, make water flow smoothly.
6) For handrail, adopts plane gear adjusting mechanism, not only suitable for people with different heights to operate, but also can be transported easily. For drive elements, adopts NSK bearing and MITSUBOSHI V-belt from Japan to make sure the performance of whole machine.
7) Top grade practical long-distance throttle controlled lever.
Hubei Roller Machinery Co.Ltd
Add:Building 3, International Enterprises Center.
Guanshan Road 4 Te 7#, Guang Shui, P.R.China.
Xd08 Hand Guided Double Drum Vibratory Road Roller. XD08 is one kind of hand light vibratory compacting machine. It applies to auxiliary construction for large -size compacting machine( roade base, foundation surface and asphalt surface). Foot path, manhole cover surrounding and road shoulder. Small-scale pavement engineering, compacting after road surface embeding and compacting after repairing of road pit. And flatting & compacting operation of narrow roade surfaces such as playgournd, field passage, build operation, pipeline refill, sports ground, golf course. Etc.
1. Full Hydraulic full-wheel driving, Two-way Multitronic and gradeability up to 45%
2. Vertical single -cyclinder air-cooling engine; Electric starting assisted with manual recoil start, covenient operation and easy maintenance and service.
3. Equiped with backing-up safety protection.
4. Large capacity sprinkling water tank, which can be used for long time
5. Vehicle is equipped with wheel stopping wedge, which is used for long-time parking on slope.
6.25mm deging distance. Convenient for compacting operation of road edage.
Main Technical Parameter
Type Unit XD08
Operating Weight kg 830
Overall Dimension (L X W X H) mm 2330X760X1222
Gradeability % ≥40
Forward speed km/h 0-3.5
Reverse speed km/h 0-3.5
Centrifugal force kN 15.7
Amplitude mm 0.3
Vibratory frequency Hz 55
Wheel base mm 580
Engine Model CF186
Rated power kW 5.86
Rated rotation speed r/min 3000
Shanghai Win-Win Industrial Co., Ltd.
No. 551, Gaoke West Road,
Pudong New Area.
Shanghai. P. R China.
Buffing glaze machine,Glaze grinding machine,Ceramic machine
A).Application of AT0612 Buffing Glaze Machine:
AT0612 Buffing Glaze Machine is mainly used for surface polishing treatment of crystal polished tile,archaized tile,microlite stone and stone etc.
B).Features of AT0612 Buffing Glaze Machine:
1.The machine can save energy by more than 60% than conventional buffing glaze machine.
2.The swing frequency of cross beam is 84 times/min for more even grinding and higher polishing efficiency.
3.The machine adopts swing type grinding mechanism,The whole grinding head will float automatically along with product surface to follw product superficial profile.
4.AT0612 automatically buffing glaze machine only needs electricity 20kw/h,Total water consumption 40L/min,Total gas consumption 12L/min.
Foshan Aitao Electronic Equipment Company
2nd industrial zone of Xiabai,
Houjie village park,
Nanhai district,Foshan city
Country Region: China (Mainland)
Business Type: Manufacturer
Contact Person: Mr Tyler