CMB 350 Delta / CMB 450 Delta

Features
• Speed up to 150 strokes/min
• Converts both Centre Seal and Three Side Seal Pouches
• Servo Motor for Indexing & Accuracy
• Microprocessor Controlled with Digital Display
• Keypad Setting for Speed, Size & Count
• Photocell Control to Convert Printed Film
• Continuous Forming / Folding, Sealing & Feeding
• One Set Cross Sealing Jaws
• Vertical and Horizontal Unwind Stands

Advantage
Machines manufactured by XL Plastics are designed for continuous duty and maintenance free operation. Some of these standeard features on all the machines not only make them more reliable but also efficient and operator friendly

Contact;
XL Plastics
Contact Person Mr. Vishal
Address 303/2 GIDC Makarpura Industrial Estate, Vadodara – 390010, Gujarat, (INDIA)
Contact Number +91-265-2638125 / 2638026 / 2652118
Fax +91-265-2638661 / 2646716
Email info@xlplastics.com
Website http://www.xlplastics.com

Features
• Stack Type Design for Easy Operation
• Printing Speed up to 60 meters/min
• 2,4 and 6 Colour Printing Options
• Two Unwind and Rewind Stands
• Interlock Between Heaters & Blowers
• Print Repeats form 8″ To 36″
• Unwind Roll Diameter: max. 600mm
• Pneumatic Engagement of Print Cylinders
• Inking Rollers Rotate and Plate Cylinders retract when printing is stopped, avoiding drying of ink on rollers and thereby reducing print wastage

Advantages
Machines manufactured by XL Plastics are designed for continuous duty and maintenance free operation. These standard features make them more reliable, efficient and operator friendly

Contact;
XL Plastics
Contact Person Mr. Vishal
Address 303/2 GIDC Makarpura Industrial Estate, Vadodara – 390010, Gujarat, (INDIA)
Contact Number +91-265-2638125 / 2638026 / 2652118
Fax +91-265-2638661 / 2646716
Email info@xlplastics.com
Website http://www.xlplastics.com

PH 800 Delta
Features
• High Speed up to 230 strokes/min.
• Servo Motor for Indexing and Accuracy
• Microprocessor Controlled with Digital Display
• Keyboard Setting for Speed, Size & Count
• Backlit Display for Operating Parameters
• Pre-sealer for extra strength on bottom gusset
• Fitting of patch by heat sealing
• Pneumatic die cut handle attachment

Contact;
XL Plastics
Contact Person Mr. Vishal
Address 303/2 GIDC Makarpura Industrial Estate, Vadodara – 390010, Gujarat, (INDIA)
Contact Number +91-265-2638125 / 2638026 / 2652118
Fax +91-265-2638661 / 2646716
Email info@xlplastics.com
Website http://www.xlplastics.com

Machine is based on pneumatic operating system.
Temperature zone : Two
Both the temperature zone has separate temperature controller and heaters.
Temperature is controlled via PID based Auto tune facility.
Temperature range: ambient to 220°c (Extra on request)
Temperature least count 0.1°c with accuracy better than ±1°c.
Pencil type air heaters are fitted on the both temperature zone.
Heating jaws: One jaw is fixed and another jaw is operated with help of pneumatic system.
Maximum daylight opening between two jaws is 100mm.
Maximum sealing length 150mm and sealing width is 20mm maximum.
Jaw is operated with help of timer fitted in the equipment, timer range 99.9minutes/seconds.
Machine is table top compact model suitable for laboratory environment.

Contact;
Deesha Impex
A/7 ,Ambawadi Flats, Bhudarpura,
Ahmedabad – 380 015
(Gujarat)
India
+91 – 79 – 2646 2772
+91 – 98240 59371
biz@deeshaimpex.com

Tumbler dryer is most significant to final fabric finishing due to its contribution to fabric dimensional stability

hamber is made of M.S. Plate and Angle with door opening arrangement and thermo chamber is made of stainless steel and its shape is like reverse “U”. There is perforated partition with wire mesh. Cloth tension unit is supplied on both side entry and plaiter side. All guide rolls will be of ebonite with proper diameter and rubber fillet roll for entry and plaiter side.

The controlled quantity of fabric is forwarded at high speed through a ventilator with adjustable speed from chamber through the u-shape channel. Change of direction of the airjet is done automatically.

For fast rise of temperature inside the chamber steam radiator is supplied with proper design K.Cal with value. All motors are supplied of standard make like ABB or cromption and inverter drive is also supplied of delta make. Main motor 40 HP AC.

Tumbler dryer is provided with electronic temperature controller to control temperature inside the chamber and regulator to control the speed of the fabric. Electric panel with all standard make relay and contractor duly wired.

Contact;
Gopal Engineering Co.
Hotel Mony Road, Opp. Sanket Tenaments,
B/H. Kadmawala Textile,
Narol, Ahmedabad – 382 405
Gujarat, India.
Phone: +91-79-25730448
+91-79- 25730732

Technical Datas:
Compact design machine body and major wet parts made of material AISI 316/316L highly corrosion resistance stainless steel.
Heavy duty cast stainless steel centrifugal circulation pump (Low pressure high discharge) with mechanical seal to effect circulation and improve dyestuff fastness.
PTFE sheet at the bottom to prevent abrasion in fabric.
Frequency controlled A.C. drive for accurate speed variation of lifter reel.
High efficiency heat exchanger to ensure quick heating/cooling.
All critical bought outs are procured from reputed manufacturers.
Low liquor ration (based on dry fabric weight).
Magnetic level indicator.
Specially designed temperature programmer microprocessor type.
Tangle free operation under correct operational condition.
No Requirement to change nozzle for any type of fabrics. Large diameter nozzle.
Quich drain features (as our standerd).

Maxmimum working temperature :
135 °C
Heating Rate :
Approx 5°C/min at steam pressure at 6 bar
Cooling Rate :
Approx 4 °C/min at water pressure at 2 bar and 20°C
Liquor Ratio :

Polyster 1:4
Polyviscous 1:6
Knitted cotton hosiery 1:8
Terry towel 1:8
Fabric Speed:2.5 to 3 mts/min

Contact;
Gopal Engineering Co.
Hotel Mony Road, Opp. Sanket Tenaments,
B/H. Kadmawala Textile,
Narol, Ahmedabad – 382 405
Gujarat, India.
Phone: +91-79-25730448
+91-79- 25730732

Specially for palm oil refinery, fractionation process is required in which palm olein and palm stearin are separated by scientifically cooling the refined palm oil by chilling plant and then filtering the oil. For this purpose crystallizing vessel is used in which chilling pipe coils cool the oil for fractionation. Palm stearin crystals are formed due to chilling which are separated in Specially Designed Fully Automatic Membrane Chamber Filter Press and pure liquid of palm olene is obtained and palm stearin cake is retained in the Membrane filter press.

Our membrane filter press is designed & Manufactured here in India by our own in our Premises only. The Presses are engineered on maximum performance and long life operation. We have good knowledge and experience on selecting suitable Rubber Membrane Plates for different process application to obtain products required.

The 8 bars Press is used for normal Palm Oil Fractionation processes to produce normal Palm Olein by using air Squeezing for Membrane. However, the Press can also be made suitable for liquid squeezing if need is required.

The 16 bars Press can be used for normal Palm oil fractionation processes to produce normal palm olein. In these application, the yield of various olein extracted is at least 2% higher compared to 8 bars air squeezing membrane filter press. In this press, the medium for squeezing is liquid.

With more than 7 years of palm oil fractionation experiences, We are knowledgeable in producing good crystallised oil slurry and possess special separation programme to achieve product quality targeting & this day also we continues to provide the latest innovations & solutions. The traditional YO-TANA Membrane Filter Press uses 16 Bar Squeezing Pressure & achieves an average yield of 78 – 80 % on normal Palm Oil.

Contact;
YO-TANA MACHINE TOOLS PVT. LTD.
11, 2nd floor, mill officer colony, OPP. Times of India, ashram road, Ahmedabad-380009 (Gujarat) India.
Phone: +91 79 26589235, 30087036 Fax : +91 79 26586705 E-mail: filterpress@yotana.com

The P 200 Vertical form fill seal machine produce center sealed pouches from a roll of packaging material of any heatsealable laminate in printed or unprinted form.

The P 200 is ideal bagger to pack various products at high speed. It is suitable to pack tea, rice, salt, sugar, grains, coffee, spices, chips, snacks, dryfruits, confectionaries, pesticides, detergents, pharmaceutical products etc.

The P 200 can be easily synchronized with any one of the following fillers to pack any kind of solid products :
Volumetric Filler
Auger Filler
Linear Weigh Filler
Multihead combination Weigher
Index Conveyor Belt

Salient Features
Controlled by most advanced PLC with touch screen operating panel.
AC inverter drive for draw dawn belts.
Inbuilt self diagnostics features.

Power reel unwinder with easy loading of the film roll.

The newly designed bag forming parts for easy and fast changeover.

The speed of the machine and the bag length can be adjusted even while the machine is in operation.

No product No bag feature ensures no waste of bags.
Alert indication for end of film roll.
Password protection for settings.
Production data in various formats.

Technical Specifications
Bag Width 60 – 200 mm
Bag Length 70 – 250 mm
Output Upto 70 bags/min.
Max Roll Dia. 450 mm (76 mm Core)
Power 3 x 415 Volts, 50 Hz.
Power Requirements 2.5 K.W./Hr.
Compressed Air Requirements 2.5. Cu. Mtrs/Hr. @ 7 bar
Weight Approx 750 Ks.
Outside Dimensions 1650 mm (L) x 1050 mm (W) x 1800 mm (H)

Contact;
Packmech Engineers
23/4, Kailash Ind. Estate,
B/h. CMC, Odhav,
Ahmedabad – 382 415, Gujarat, India.
+91 – 079 – 22876181, 22875669
+91 – 079 – 22876893
info@packmechgroup.com

This robust conveyor is similar to the regular cooling conveyor, as it has three conveyor belts to provide perfect cooling to the sweets. The speed of the first belt which is narrowest is fast and the remaining two belts which are broad are slow. The first belt is coupled to drive of sweet former, so that it can maintain its speed with machine. The first belt carries the sweets released from the high speed forming machine. Sweets from the first belt are uniformly spread onto the second belt with the help of a sprinkler. To retain the shape and size of the sweets it is very important to spread them uniformly and this is taken care by the sprinkler. With the help of guiding steel plate, sweets are passed onto the third belt.

In this conveyor we have provided two input of air supply from blower. The cooling is provided by the air which is circulated through nozzles on the top for first belt. And for second & third belt side nozzles are provided for perfect cooling.

Conveyor Belt Specification

Conveyor Belt Width Length Cooling Dimension
1st Belt 11 cm 12.90 Meters 6.21 Meters
2nd Belt 65 cm 10.07 Meters 4.84 Meters
3rd Belt 105 cm 10.67 Meters 5.14 Meters

Technical Specification

Capacity MAX 5 Tons | Shift
Driver Power Consumption 1 HP
Blower Power Consumption 5 HP
Weight (approx) 1560 Kgs.
Dimension (L x W x H) (approx) 5250 x 1375 x 1900 (mm)

Capacity Max 5 Tons / Shifts
Weight1560 kgs ( Approx )

Contact;
VIJESH & COMPANY
Plot No. 78/1 & 2, Phase – I, ‘F’ Road,
G.I.D.C., Vatva, Ahmedabad – 382445
Gujarat, India.
Phone +91-79-2583 2891
Fax +91-79-2589 6556
Mobile +91-98250 33494
E-Mail vijesh.co@gmail.com

Available with screw lengths from 45mm to 150mm
available as:

* Grooved-feed versions for high output.
* Smooth intake versions for high production flexibility.
* Vented versions with smooth or fine-grooved intake output ranges from 30 kg/h to 1.500 kg/h.

Major benefits :

* Highly versatile extruders that can be tailored to almost every application.
* Specialized screw designs for high output rates and melt homogeneity at low temperatures.
* Sturdy design and small footprint.
* Precise barrel temperature control with APC.
* Power Feed Technology (PFT) to ensure optimum feeding with grooved-feed executions.

Technical Specifications
Sr. No. Model Screw Dia. (mm) Main Drive (KW) Output Capacity (Kg/Hr)
1 SSE-25 25 2.2 / 3.7 / 7.5 9
2 SSE-45 45 5.5 / 7.5 / 11 35
3 SSE-65 65 11 / 15 / 18 70
4 SSE-75 75 18 / 22 / 30 100
3 SSE-110 110 30 / 37 / 45 200
4 SSE-150 150 45 / 55 / 55 350

Contact;
Neoplast Engineering Pvt. Ltd.
43, GIDC, Industrial Estate, Phase 1, Vatva,
Ahmedabad – 382 445. Gujarat. India.
Phone :
+91 – 79 – 2583 0602