Sponsored links



Floor Burnishers Comments Off

HIGH SPEED BURNISHER Model: B 1500 P photo floor burnishersSpecifications:

• Pad Size: 20 inches
• Motor. 1.5 Hp AC twin capacitor
• Circuit Breaker
• Power Cord: 50 ft . 3 wire grounded 14 gauge
• Handle: Durable chromed 13 gauge steel 1 1/4″ diameter
• Wheels: Four 5″ non – marking wheels
• Shipping Weight: 105 lbs .
• Net Weight w/o cable: 99 lbs .
• Shroud: Epoxy powder coated steel
• Chassis: Cast aluminum

Thorne Electric Co.
P.O. Box 18363
San Antonio ,Tx. 78218-0363
Tel: (210) 5901226
Fax: (210) 590-1258

BMS10 Blaster’s Multimeter Switch

Blasting Equipment, Shot-Firing, For Tunnelling Comments Off

BMS10 Blasters Multimeter Switch photo blasting equipment shot firing for tunnellingThe BMS10 Blaster’s Multimeter Switch is used with an REO B0199.9-1 or B01999-1 Single Circuit Blaster’s Ohmmeter or other single circuit Blaster’s Multimeters or Blasting Glavanometers when an REO B0199.9-10 or B01999-10 Ten Circuit Blaster’s Ohmmeter is not available. The BMS10 aids in checking for errors and broken wires in multiple blast circuits. A blasting cable receptacle with an attatched screw-on duct cap and two meter terminals provide the necessary connection between the meter and the blasting circuits. The enclosure is a rugged water and corrosion resistant polycarbonate plastic case. Shipping Weight: 2 lbs. (0.9 kg.)

D & L Thomas Equipment Corp
1453 Route 9
Box 200
Spofford, NH 03462
(603) 363-4706

Kyocera KD135GX-LPU 135 watt

Other Machines Comments Off

Kyocera KD135GX LPU 135 watt photo other machines solar energy industry energy power industry and heat engineering pneumatics and hydraulicsKD135GX-LPU
Kyocera leads the industry in the development of solar energy products. Their commitment to continuous improvement is shown by repeatedly achieving world record cell efficiencies.

The LPU version of the KD135 solar panel is just another example of their commitment to quality and improvement. It is identical to the KD135GX-LP except that the frame depth is now 1.8 inches, vs 1.4 inches and its new frame technology provides for an indreased snow load. The frame now allows end mounting under 2400 Pa (50 psf) and traditional side of frame mounting under 5400 Pa (113 psf).

Kyocera manufactures and assembles solar cells and modules at its own worldwide production sites using a true vertical integration process. This superior approach gives Kyocera complete control over every step of the manufacturing process, producing modules with the industry’s tightest power tolerance, promising high quality and efficiency.

Electrical Performance under Standard Test Conditions (*STC)
Maximum Power (Pmax) 135W (+5%/-5%)
Maximum Power Voltage (Vmpp) 17.7V
Maximum Power Current (Impp) 7.63A
Open Circuit Voltage (Voc) 22.1V
Short Circuit Current (Isc) 8.37A
Max System Voltage 600V
Temperature Coefficient of Voc -8.0×10-2 V/°C
Temperature Coefficient of Isc 5.02×10-3A/°C

Fax: 1.858.450.0134
Mailing Address:
Kyocera Communications, Inc.
9520 Towne Centre Drive
San Diego, CA 92121

Sharp Battery-Based System 3060 watts

Complete Power Systems Comments Off

Sharp Battery Based System 3060 watts photo complete power systemsRooftop flush mount racking using UniRac SolarMount rails, L-feet, splices, & top-clamps

These adaptable systems may be used on-grid for battery backup, or off-grid for complete support (increase battery capacity ).
Kit price includes: PV modules with MC cables; asphalt shingle roof flush mount racks as listed; grounding washers & lugs; MC extension cable(s) & clips; DC combiners, disconnects, and breakers as required.

Documentation includes electrical schematic, data sheets, installation & owners manuals, warranty cards. Options include mounting standoffs with flashings, custom configurations, remote monitoring, and larger batteries. All Systems configured to operate from -4 to 113°F

System Includes:
Solar Panel: Sharp NE-170 Watt
Inverter included- GVFX3648

Electrical Characteristics
Cell Multi crystal silicon
No. of Cells and Connections 72 in series
Open Circuit Voltage (Voc) 43.2V
Maximum Power Voltage (Vpm) 34.8V
Short Circuit Current (Isc) 5.47A
Maximum Power Current (Ipm) 4.9A
Maximum Power (Pm)* 170W
Minimum Power (Pm)* 153W
Encapsulated Solar Cell Efficiency (C) 14.44%
Module Efficiency 13.1%
PTC Rating (W)** 149.9
Maximum System Voltage 600VDC
Series Fuse Rating 10A
Type of Output Terminal Lead Wire with MC 3 Connector

* High-power module (170W) using 125mm square poly-crystalline silicon solar cells with 13.10% module conversion efficiency.
* Sharp’s advanced surface texturing process increases light absorption and efficiency while providing a more subdued, ‘natural’ look.
* Bypass diodes minimize the power drop caused by shade
* Water white, tempered glass, EVA laminate, plus aluminum frame for extended outdoor use.
* Clear Frame
* Nominal 124VDC output is perfect for grid-connected systems.
* UL Listings: UL 1703, cUL
* Sharp modules are manufactured in ISO 9001 certified facilities.
* 25-year limited warranty on power output

Innovative Solar Solutions, Inc.
2725 Westinghouse
Blvd., Suite 100
Charlotte, NC 28273
Local: 704-583-0016
Toll-Free: 866-856-9819
Fax: 704-973-0666

Premier Scalper/Aspirator

Aspirators Comments Off

Premier Scalper/Aspirator  photo aspirators milling and pasta processing equipment agriculture and food processingPremier Scalper/Aspirators are independent units which are usually the first machine in a process flow. Many times the Premier Scalper/Aspirator will be mounted above an Indent Length Separator or other process equipment. Premier Scalper/Aspirators are used to scalp off or remove oversize material as well as an accurate winnowing or aspiration of the product to remove light material such as chaff and small seeds.

The Scalper portion of the unit consists of a wire cylinder either 12″ or 18″ in diameter and will match the width of the Aspirator portion of the unit. The length and diameter of the scalping reel will determine the overall capacity of the Scalper/Aspirator. Product Feed is controlled on the full width a with the standard rack and pinion gate, but a Gravity Feed Gate or Powered Feed Rolls are also available options. The proper wire mesh opening on the Scalping reel is chosen to let the good product and anything smaller pass through the screen, but will keep large oversize material such as straw, lumps and stones on top. The slow rotation of the Scalping Reel will remove the oversize material and discharge is out a hopper located in front of the scalping reel. After scalping, the product is exposed to an upward flowing and adjustable air flow which will lift the light material and deposit it into an expansion chamber located in behind the scalping reel. Premier Scalper/Aspirators are available either with or without internal fans and Closed Circuit units are available from ArrowCorp.

Premier Scalper/Aspirators are available in widths from 24″ to 120″ wide and have corresponding capacities of 300-5500 bushels per hour in export quality wheat.

Premier Aspirators have the same basic design as the Scalper/Aspirator but without the scalping reel to remove large oversized trash. Premier Aspirators can be used as stand alone units, or on top of Premier Indented Cylinders or Screen machines. The same widths are available in Aspirators as the Scalper/Aspirators, from 24″ wide to 120″ wide. Capacities can be higher than Scalper/Aspirators as there is now restriction caused by the time required to pass material through a scalping screen. Aspirators come equipped with a standard Rack and Pinion Feed Gate but are also available with an optional Gravity Feed Gate or Powered Feed Roll. Premier Aspirators are either with or without fans in an open circuit design or available from ArrowCorp in a Closed Circuit design.

50 Cleveland Ave S.W.
New Brighton, MN 55112
(651) 636-7323 phone
(877) 336-7323 toll free
(651) 636-8466 fax

NS Aspirators

Aspirators Comments Off

NS Aspirators  photo aspirators milling and pasta processing equipment agriculture and food processingBjerke Brothers, Inc. Aspirators provide an effective solution for dust, fines, and chaff removal. Two basic models are available: Open Circuit which uses the external dust control system to provide a fresh air supply; and Closed Circuit which uses integral fans to provide a supply of recirculated air. In both models the air supply is pulled through the product stream to lift and separate fines from the product mass. NS Aspirators are available in widths from 24″ to 115″ and in various body styles.

Fixed or variable speed feed rolls for uniform feed rate and positive shut off on selected models

Bjerke Brothers, Inc.
P.O. Box 152
1311 162nd Ave. NE
Buxton, ND 58218
Tel:(701) 847-3125
Fax: (701) 847-2157

Sunquest Pro 14SE

Tanning Beds And Booths Comments Off

Sunquest Pro 14SE photo tanning beds and boothsThe Sunquest Pro 14SE home tanning bed delivers dynamic tanning power and convenience for a very affordable price. This bed is priced right, comes 99% pre-assembled, and is backed with the Wolff System tanning you have came to expect.

* 14 Wolff System 100W

* 20 Minute Session Time
* Steel Mainframe
* Bio-Tech Tunnel Design
* Wide, Curved Acrylic Sheets
* Duramax 2000 Exterior Housing
* Superflow Internal Cooling System
* Protective canopy grid (not shown)
* (optional acrylic available)


* Backup Timer

Electrical Requirements
* 120 Volt Dedicated Circuit
* 20 Amp Circuit Breaker
* 20 AMP NEMA #5-20R receptacle

* Overall Size: 75.75″L x 35″W x 48″H
* Minimum Room Size: 6′ x 7′

4905 Hwy 70 East
New Bern, NC 28562
Phone: (800) 421-3734
Email: customerservice@wolfftanningbed.com

C-Tec CFP702E-4K 2 Zone EN54 Conventional Fire Alarm

Indicators, Alarm Systems For Home Comments Off

C Tec CFP702E 4K 2 Zone EN54 Conventional Fire Alarm photo indicators alarm systems for homeC-Tec CFP702E-4K 2 Zone EN54 Conventional Fire Alarm Panel Key Version

Supplied in an attractive flush or surface mountable plastic enclosure, 2, 4 and 8 zone versions are available, each featuring four conventional sounder circuits, class change and alert inputs, two fire outputs, a fault output and a reset output.

A wide range of engineering functions are also provided including (depending on the model purchased) selectable zone delays, coincidence and non-latching zone facilities. Comprehensive test and fault finding facilities are also provided on all variants.

CFP economy CFP702E-4K 2 zone panel keyswitch version.

CFP702E-4K economy panels are not compatible with CFP repeaters or CFP relay output cards. Other features that are different from the standard panel range are, coincidence, zone delay and non-latching zone facilities.


    * Fully compliant with EN54 Parts 2 and 4
    * Available with 2, 4 or 8 zone circuits
    * Four conventional sounder circuits
    * Standard, economy and LPCB approved versions available
    * Installer-friendly design accommodates easy first fix and straightforward maintenance
    * Attractive flush or surface mountable plastic lid and enclosure
    * Auxiliary remote, auxiliary fire, fault and reset outputs
    * ‘Class change’ and alert inputs
    * Low quiescent current
    * Intuitive user-friendly interface
    * Multiple indicators
    * End of line units included (one per zone)
    * Integral 1.5A switch mode PSU
    * Detector and sounder circuits share common negative allowing straightforward three-wire retro-installation

Power Supply Specification:

    * Mains supply voltage 230V 50/60Hz
    * Mains rated current 350mA maximum
    * Internal power supply 19V – 28.5V (27V nominal). Ripple 7V maximum (battery fault)
    * Total output current limited to 1.5A
    * Supply and battery charger monitored for failure YES (battery charger is also temperature compensated)
    * Batteries monitored for disconnection and failure YES
    * Batteries protected against deep discharge YES (Deep discharge cut off approx. 21 volts)
    * Max. battery size and type 2 x 12V 3.3AHr VRLA (Valve Regulated Lead Acid) connected in series
    * Mains fuse 240V 1A HRC ceramic 20mm compliant with IEC (EN60127 PT2)
    * Battery fuse 1.6A F 20mm compliant with IEC (EN60127 PT2)
    * Current draw from battery (Mains failed) 1.5A maximum

Detector Circuit Specification:

    * Cable type Fire resistant screened cable, minimum conductor size 1mm2
    * Connector blocks Plug-on type, largest acceptable conductor size 1.5mm2
    * Max cable length per circuit 500 metres
    * Line monitored for open circuit and short circuit YES
    * Line monitored for detector removal YES – end of line monitoring device modules provided
    * Maximum allowable impedance (each conductor) 20W
    * Maximum cable capacitance 0.27mF
    * Call point resistor value 470 to 680Ω
    * Max. number of smoke/heat detectors per zone 25
    * Max. combined number of detectors & manual call points 32 per zone

Sounder Circuit Specification:

    * Number of circuits 4
    * Cable type Fire resistant screened cable, minimum conductor size 1mm2
    * Connector blocks Plug-on type, largest acceptable conductor size 1.5mm2
    * Max cable length per circuit 500 metres
    * End of line resistor value 6800 5% Tol. 0.25W (blue, grey, red, gold)
    * Each circuit monitored for open and short circuit YES
    * Alarm voltage 27V maximum, 20V minimum (final battery voltage)
    * Sounder circuit fuses (one per circuit) Resetable type (200mA min. hold current; 400mA max. trip current; 50mA when tripped. Reset when faults removed)
    * Maximum total sounder output current to all outputs 4 x 200mA = 800mA
    * Maximum No. of bells @ 25mA 32
    * Maximum No. of electronic sounders @ 20mA 40 (sounders must be polarised)

Auxiliary Outputs:

    * Type Non monitored open collector transistor
    * Max. sink current 30mA each
    * Max. open circuit voltage 27Vd.c
    * Reset output Active during reset cycle
    * Remote output Active during any unsilenced fire condition (provided all relevant delays have expired)
    * Auxiliary output Active during any fire condition (provided all relevant delays have expired)
    * Fault output Active when no faults are present – failsafe to open circuit
    * 24V aux power output (for use with the above) Output protected by a resetable fuse (100mA min. hold current). Resets when fault removed

Auxiliary Inputs:

    * Class Change (makes sounders sound continuously) Connect to OV to trigger. Max. input voltage 27V. (Non-latching)
    * Alert (makes sounders pulse intermittently) Connect to OV to trigger. Max. input voltage 27V. (Non-latching)


    * Physical size Size = 380 x 235 x 96mm approx.
    * Weight 1.75kg (without batteries)

This Panel Requires 2 X 3.4ah Batteries BAT3.4AH

E-Supply Ltd
9A Forresters Business Park
Estover Close
Telephone: 0845 504 2840
Int Telephone: 00 44 1752 696 858
Email: info@e-supply.co.uk

Sponsored links