Sludge Dryer
Sludge Dryers 2011
Sludge Dryers manufactured by Met-Chem are designed for small, medium and large quantity sludge generators. These dryers can fit under the filter press for direct loading or can be located elsewhere in the plant. The sludge is dried by the heated liner of our unit while it is broken-up and circulated by our spiral blade system. The dryer liner uses indirect heat sources from either steam, electric strips or gas fire. Our preheated airflow system draws the moisture off the top of the internal dryer and out through our wet scrubber system. After 4-6 hours of drying time the reduced sludge is removed by simply opening our discharge panel underneath our units for gravity discharge into a container. A conveyor auger is available as an option to remove the sludge upward if the disposal container is elevated above the dryer.
Sludge Dryer Features and Benefits
Uses low cost steam, hot water or gas fire for indirect heat source
Available with electric heat as an alternative
1-6 cubic feet sludge capacities available in our Mini-Series with capacity up to 100 cubic feet in our Maxi Series
Internal parts are all made of grade 304 stainless steel (316SS is available as an option)sludge_dryer_auger.jpg
Simple control panel allows for easy operation and maintenance
Externally mounted pillow block bearings, to keep bearings out of harms way.
Temperature is controlled for over temperature protection
Stainless steel wet fume scrubber is available as optional equipment (Grade 304)
Sludge reduction savings offers an easy pay back on equipment purchase and operating costs
Unit dimensions can be altered to fit each individual installation
Up to 4 to 1 reduction of sludge volume can be expected
Contact;
Metchem
Contact Us: 777 East 82 Street ~ Cleveland, Ohio 44103
(216) 881-7900 ~ FAX (216) 881-8950 ~ info@metchem.com
Tags : Dryer, heat, panel, pillow block bearings, sludge, sludge dryer, sludge generators, spiral blade, Temperature, wet scrubber system