For a long time, throughout the field of tanning machines there has been the need of a machine producing both sammying and stretching effect at the same time, in order to help leather working during its following phases.
Our experience in the construction of tanning machinery has made possible the realization of the RAL/MF machine which presents structural characteristics of extreme strenght, simplicity of construction, maintenance, adjustments and reliability. Moreover, the RAL/MF machine, is equipped with a safety system which perfectly meets requirements requested by the effective laws.
- The leather supporting cylinder position permits a quick and easy positioning of leather, as quick and “mild” is the closing/opening movement of machine.
- The staking cylinder is built as the ones employed for setting out machines and adjustment between staking cylinder and leather supporting cylinder is made through an easy push-button device, by reading the value on a graduated dial plate.
-The stretching cylinder is independent, its rotation is contrary to the extraction of the leather, its speed is variable in order to obtain a better stretching of leather. Its adjustment, concerning approaching and removing from stakings, is easily made.
- Drying pressure is hydraucally adjusted by an easy control placed on the machine side (the drying pressure reaches 10 Tons of power).
- Leather extraction by hydraulic control with variable speed from 18 to 36 m/1′.
It is adjustable by a control placed on the machine side.
-Felt sleeves are automatically centered.
-The whole electric equipment is placed in a strong waterproof cast iron box, the special control board is placed in an easy position, right of the operator.

Contact;
CM Tannery Machines Spa
Via C. Colombo, 23
56029 Santa Croce sull’Arno (Pisa) Italy
Ph. +39 0571-35543/30060 Fax +39 0571-34785
e-mail: cm@cmspa.it

Tags : CONTROL, cylinder position, dial plate, iron box, mf 1600, pisa italy, position, pressure, RAL, speed

Similar equipment products

• Hot Chamber Die Casting Machine J214
  Description Hot Chamber Die Casting Machine J214 The machine is applicable to die casting of non-ferrous metals with low melting point such as Zn (Zinc) and Pb (Plumbum). It is widely used in various industries including automobile and motorcyc...
• Disperser Hoist & Tank Mounted
  Dispersers are available with single speed, two speed and variable speed mixing shafts. Some are directly mounted atop a tank and are fixed to operate with the blade in only the original mounting position. Other tank mounted dispersers can raise and ...
• High-strength alloy steel bar straightening machine
  The kind of equipment is more inclined rooler (mainly 7-rolls) vertical straightening machine ,straightening machine body and mainly on the composition of feed device with a corresponding electronic control, hydraulic, pneumatic and lubrication equip...
• servo injection machine
  The machine use the high-performance servo dynamic control system, the oil pump as power source, having the characteristics as follow: high response, saving energy, low noise, high-control precision, and have the breakthrough in the perfect connectio...
• D 552 NVT band sealer
  D 552 NVT is a vertical band sealer, designed for large pre-made bags that are sealed standing up. It is ideal for powder, liquid, or solid products that would spill if sealed lying flat. The sealing head on the D 552 NVT can be rotated 90°, from ver...