Open Width Compactor – OC 400
Compactors 2010
Open Width Compactor – OC 400 is suitable for open width knit fabrics to achieve exact dimensional stability and a soft feel. The machine generally consists of a feeding frame with centering device and driven scroll rollers, an equalizing stenter frame with overfeed roller and brush pinning arrangement.
The entry section of Pin Frame is provided with edge spreaders IR In-Feed device, an S.S. fabricated steaming unit for uniform moistening of the fabric. The Steaming Device has stainless steel sliding shutters that allow steam to flow only as per the width of the fabric.
A low contact Glueing and Drying unit is provided with a stainless steel trough. Four selvedge drying units with infra-Red emitters are placed on either side of the machine. The delivery side section consists of edge dryer, Selvedge trimmer and a suction device, Exit roller, Width Adjustment device and the drive to the chain are housed in a exit box.
The compacting unit consists of 2 felt compacting units, each of them consisting of a Nomex felt approx. 20 mm thick, a steam heated chrome-plated center roller of dia. 400 mm, a rubber covered roller driven by variable frequency drive, a compacting pressure roller, a felt tensioning roller and a felt centering roller. Each unit is provided with a special anti-fiction sheet type shoe controlled by an electrical actuator to control the compressive shrinkage. A fabric cooling roller is provided after second felt to cool the fabric by means of chilled water circulation. Fabric Tension through the machine is controlled with the help of sensitive load cells and variable frequency drive with PLC and touch screen.
Address :
Swastik Premises, Amraiwadi,
Ahmedabad – 380026, INDIA
Phone : +91-79-6543Â 501, 2274 3553/Â 2274 9068,
+91-99245 12299
Fax :+91-79-2274 9131
E-Mail :sales@swastiktextile.com
info@swastiktextile.com
swastik.intl@rediffmail.com
Website :www.swastiktextile.com
Tags : com, Compactor, edge, Open, steel