‘MAXMECH’ Slipform Kerbing Machine Model : MSK 9145 is a most versatile machine for making different types of kerb for highways, footpath upto 1220mm width & 150mm thk. small box gutters, etc.

The concrete for pouring into the mould should be of special mix design & should have slump of approx. 30 to 40mm for small section & 25 to 30mm for higher section.

The machine is basically self-propelled driven by a compact water cooled diesel engine, having a Rubber Padded Crawler track, of 910c/c & 240mm width at front driven by a powerful hydraulic motor with gear box.

Technical Specification

At rear there are 4 idle solid tyres rubber wheels 2 on each side mounted equalizer beam. Complete machine is mounted on three hydraulic jacks, one at front & two at rear. The front portion carries crawler track and can also be steered by a horizontal hydraulic cylinder. The rear portion carries engine with rubber wheels one left hand side of the machine the mould box is suspended from the rear portion with receiving hopper for concrete. Two or three hydraulic needle vibrators are fixed inside the receiving hopper for consolidation of concrete before entering the mould chamber. The mould chamber is closed at front end & open at rear end with approx. length of 1500mm and with proper design so that on the machine propel in forward direction the concrete kerb is formed smoothly in slipform manner.

Two electronic sensors are fitted on side of mould box, the front one is for steering & second rear one is for grade. The machine follows the stringline which is laid & pre landed by theodolite along the length of the kerbing line slope sensor is fitted on the control panel at the centre of the machine.

The mould is of quick fit design & can be changed within 30 minutes max.

Head Office : 7611, G.I.D.C. Estate,
Phase – IV, Vatva,
Ahmedabad-382 445.
Gujarat (INDIA).

Telefax : 0091-79-25841143
25840930

E-mail : info@maxmechgroup.net
Contact us: 0091-79-25841143,
0091-79-25840930

Tags : front, KERBING, Machine, rubber, width

Similar equipment products

• Avant front tank seed drill
  The Avant front tank sowing combination with working widths of 4, 5 and 6 m is the ideal machine for contractors and large farms. The front seed tank with its capacity of 1500 litres (option 2000 litres) is offered with a front mounting frame or a st...
• Fellowes Titan TL-125 12.5 Inch Pouch Laminator
  The Fellowes Titan TL-125 pouch laminator is a high performance laminator with advanced features for large offices. The Titan TL125 Laminator features a 4-roller system for superior results on documents up to 10 mil thick. It also has a user-friendly...
• Compo Cleaner
  The Compo Cleaner is a throughfeed machine, so parts are processed continuously. The Compo Cleaner is designed, so it can be placed directly in the production line or used in conjunction with a robot for a continuous cleaning of parts day and night....
• MCML-140 Damping Machine
  This wool damping machine is designed to dampthe wool of the skinswitj special products, either for later ironing, bleaching or carrying out decorative work on the skins. Working conditions of the machine have been kept in mind during construction...
• Dove CONVEYORS
  As all DOVE™ equipment, the conveyor systems supplied by DOVE™ set high standard of performance, reliability, and durability, to meet a range of requirements in material processing and handling. DOVE™ conveyors are built with various dimensions, stoc...