EPS Grinder is an optimum solution for recycling all waste EPS or EPP. EPS grinder can use in EPS waste, such as EPS boards, EPS sheets, EPS blocks.

EPS grinder are combine with foam shredder and foam grinder. Foam shredder pre-reduce the waste EPS into pieces 30-60 mm, then foam grinder further reduce these pieces into the desired particle 3-10 mm.

Motor power hp 2 3 4 7 foam grinder
Motor power kw 1.5 2.5 3 5.5
Feed opening W mm 200 200 200 250
Feed opening L mm 450 550 600 770
Rotor speed rpm 1450 1450 1450 2900
Machine weight kg 200 250 350 500
Capacity kg/h 100-200 200-300 300-500 500-800

Contact;
Harden
Phone; +86 20 87566110
Fax; +86 20 87566190
eps-compactor@hardenmachinery.com

Tags : epp, Feed, grinder, Motor, optimum solution, rotor, rotor speed, shredder, speed, waste

Similar equipment products

• Harden EPS Shredder
  EPS Shredder is an optimum solution for recycling all waste EPS or EPP. EPS shredder allowing EPS manufacturer to reintegrate their EPS boards, EPS sheets, EPS blocks, completely back into the production process. The EPS shredder adopt dense rotor cu...
• Woodward Mechanical Governor
  Woodward TG611 governors are mechanical-hydraulic speed-droop governors for controlling small steam turbines. These governors control turbine speed by sensing turbine rotor speed via their input drive shaft, comparing this speed to an internal speed ...
• Hammer Crusher
  Hammer Crusher is mainly used for crushing medium-hard or brittle materials with hardness not more than 300Mpa and 15% moisture, such as coal, cement, gypsum, alumen, brick, tile, limestone, etc. It has the features of simple structure, big crushing ...
• Neue Herbold – Single-Shaft-Shredder
  Neue Herbold - Single-Shaft-Shredders HZR Series are mainly used for pre-cutting of bales, scrap tires, energetic utilization of waste as well as post consumer waste. Technique Neue Herbold - Single-Shaft-Shredders are equiped with a slow operat...
• Vertical Axis Wind Turbine FDV-10KW Model FDV-10000
  Description Vertical Axis Wind Turbine FDV-10KW 1. This turbine is adopted maglev axis and can be used for on-grid and off-grid, there's on-grid and off-grid controller and inverter we supply for this turbine 2. With 5PCS carboform & FRP...