Disperser Hoist & Tank Mounted
Dispersers 2011
Dispersers are available with single speed, two speed and variable speed mixing shafts. Some are directly mounted atop a tank and are fixed to operate with the blade in only the original mounting position. Other tank mounted dispersers can raise and lower the blade by several feet (to better control the vortex) without exiting the tank. Another design, perhaps the most popular, places the disperser on top of a hydraulic lift that is mounted to the floor. The lift enables the operator to raise the blade completely out of the mixing vessel and change to another vessel. This technique uses small portable tanks (up to 500 gallons) that can be rolled away on wheels or picked up with a fork truck. Larger stationary tanks are often centered within the arc of rotation from the center of the hoist to the center of the mixing shaft. The bridge containing the mixing shaft at one end and the motor at the other is then rotated from one tank to the next. Choosing the best configuration of available designs is a combination of functional need and economic justification.
Machine Features:
Dissolves, deagglomerates, disperses, emulsifies
Sizes range from 5HP to 400HP
Maximum utility through wide varied drive and frequency inverter speed ranges
Optional 360
Tags : CONTROL, Dispersers, economic justification, frequency inverter, functional need, maximum utility, position, speed, speed ranges, vessel