Manual crimp workstation
for attaching punched contacts to the inner sheathing of an HF conductor

Description
The EPS 2001-based crimping system has been developed for crimping an HF punch-bend contact onto the inner conductor of an HF wire.

The paper take-up reel and a slack control system ensure tension-free contact feed. After preparing the wire it is stripped by a centrically closing stripper with a zero cut module. The HF inner conductor is crimped to the contact by the crimping tool.

Examples Of Use This system is especially suited for the rational crimping of contacts on the inner conductors of HF wires.

Contact;
Dracon-Eltron
SALES & SERVICE
Herastraat 51
5047 TX Tilburg
Phone: +31 13 578 0800
Fax: +31 13 571 1369
Email: sales@dracon-eltron.com

Tags : conductor, conductors, CONTROL, crimping tool, Description, inner conductor, Paper, sheathing, tilburg, wire

Similar equipment products

• Stretchers for Dry and press section
  Stretchers are developed to automatically control the felt and wire tension in the press and dryer section of the paper machines. It includes a lever arm and a mass cooperating to exert a rotational force on a roll carrying the felt, whose rotation i...
• Electric Oven (CK-35) with PVC wire, 2 round pin plug
  Description Electric Oven (CK-35) * 35 liters capacity * 100~240V 50/60Hz 1200W * 50-250 centidegree temperature control * 60 minutes timer with signal bell * Top and bottom stainless steel heating elements * With inside lamp. * With view ...
• Portable Edge Bander (KM600D)
  Description Portable Edge Bander (KM600D). The KM600D portable edge bander has been updated with a new exterior casing along with new functions as detailed below: Supplementary double adhesive application for extra strength on both edge bandi...
• Downdraft sanding table 53 808 LPM (1900 SCFM)
  Description Downdraft sanding table 53 808 LPM (1900 SCFM) - Eliminate airborne dust and contaminants while sanding. - Ideal for use with non-vacuum, central-vacuum, orvacuum ready tools equipped with non-vacuum pads. - Dual filtration –...
• CNC Wood Engraving Machine With CE (QL-1325)
  Description CNC Wood Engraving Machine With CE (QL-1325) Product Features: Axis under the control of software, high automation; High speed and efficiency, max. Speed over 14m/m; The CNC Engraver is with two motors and unique two rack driving...