Sponsored links

 

Visual Fault Locator

Other Machines Comments Off

Visual Fault Locator  photo other machines optical fibres telecommunication system exchanges and network equipmentThe VFL-10 is a compact but powerful visable light source with an output power up to 8dBm. The VFL-10 can be used to locate sharp bends and breaks in jacketed or bare fiber within 10km. It can also be used to identify connectors in patch panels or indentify fibers during splicing operations.

Specifications:
Output wavelength (nm) 650±10nm
Emitter Type LED
Connector Universal 2.5 mm
Modulated Frequency 2 Hz
Output Power 1 mW / 0 dBm
Battery Life 15 hours (continuous operation)
Operating Temperature 14°F to 113°F
(-10°C to +45°C)
Storage Temperature -4°F to 158°F
(-20°C to +70°C)
Humidity 0 ~ 95%
Dimension (in) 7.1 x 0.6
(180mm x 15mm)
Net Weight .31 lbs (140g)

Contact;
Phone: (732) 256-1081
Fax: (415) 358-4602
Email: Sales@FiberOpticPro.com
Precision Rated Optics
37 Sweet Gum Road
Howell, NJ 07731

850nm Multimode Fiber Optic Test Kit

Other Machines Comments Off

850nm Multimode Fiber Optic Test Kit photo other machines optical fibres telecommunication system exchanges and network equipmentThe 850nm Fiber Optic Test Kit is a complete, economical test solutions for the verification and maintenance of 850nm multimode fiber optic LAN networks. Fiber Optic Kits include a precision, 5 wavelength (850, 1300, 1310, 1490, 1550nm), .01 dB resolution fiber optic power meter (Model 3208A) with a FC + 2.5mm universal connector interface and protective rubber boot, Model 3109 850nm Fiber Optic LED Light Source, a set of quality, 3 meter patchcords, mating sleeve, and a rugged carry case.

When ordering, specify the connector type that you need to connect too. By default, we supply ST patchcords with kit.

* Fiber Optic 850nm Test Kit Applications: LAN/ CCTV installation/ maintenance
* Patchcord and Fiber Optic component Testing
* Laboratory testing

Contact;
Fiber Optics For Sale Co.
775 Montague Expwy, Suite I
Milpitas, CA 95035
Toll Free: 1-888-883-FOFS(3637) Phone: 1-408-890-6299
Fax: 1-408-273-6592
Sales Email: sales@fo4sale.com
Tech Support Email: techsupport@fo4sale. com

OWA-100 CWDM Optical Wavelength Analyzer

Other Machines Comments Off

OWA 100 CWDM Optical Wavelength Analyzer photo other machines optical fibres telecommunication system exchanges and network equipmentOptical Wavelength Analyzer is designed to measure both wavelength and optical power of multi wavelength optical signals in WCDMA, CWDM-PON and WDM-PON system that uses multiple optical carriers with different wavelengths. It is so compact and mechanically stable that it is suitable for outdoor field application.
Features:

* Simultaneous 16 channel measurement of CWDM, both optical power and wavelength.
* Compact size, excellent portability and easy operation
* Applicable for wavelength optical network such as CWDM, WiBro, 4G
* Also Works as a typical optical power meter (850nm~1650nm)
* Typical cell phone travel charger and USB data cable
* Color LCD (resolution of 320 x 240 dots)
* Add to graphic display
* Light weight for on-site measurement
* Quick start operation, requiring no warm-up time and reducing testing time
* A robust, shock-proof, splash-proof design for field operation
* Adjustable auto power-off interval for low power consumption

Contact;
TheFibers Inc.
#1103 K-Center Bldg, 1591-9 Kwanyang-Dong, Anyang-City, Korea
Tel: +82-31-381-6108 Fax: +82-31-381-6109
sales@thefibers.com

OLM-202B Optical Loss Multimeter

Other Machines Comments Off

OLM 202B Optical Loss Multimeter  photo other machines optical fibres telecommunication system exchanges and network equipmentThe OLM2 series Optical Loss Test Set (Multimeter) combines a power meter and a 3-wavelength laser source, for optical fiber network installation and maintenance. With the large capacity of data storage, it’s very convenient for field testing and transfering the test results to PC through USB interface.
Features

* Auto wavelength recognition
* Data storage up to 999 results
* USB interface and PC associated software available
* Interchangeable connectors available for both power meter and laser source

Standard Accessories:

* FC/SC/ST connectors
* Carrying Soft Bag
* User Manual
* PC Software
* USB cable
* AC/DC power adaptor
* Rechargeable Batteries

Optional Accessories:

* LC/E2000 connectors for power meter port
* Aluminium Carrying Box

Contact;
Phone: (732) 256-1081
Fax: (415) 358-4602
Email: Sales@FiberOpticPro.com
Precision Rated Optics
37 Sweet Gum Road
Howell, NJ 07731

S199M Mass Fiber Fusion Splicer

Other Machines Comments Off

S199M Mass Fiber Fusion Splicer photo other machines optical fibres telecommunication system exchanges and network equipmentThe S199M12 Ribbon Fiber Fusion Splicer is specifically designed for splicing ribbon or single-strand fibers. Splices are accomplished in 30 seconds and yield a typical loss of 0.04dB for single mode ribbon. Various fail-safe features give the operator control of the splicing process, preventing costly mistakes and the necessity for re-burns. Used together with Fitel’s S323A Precision Cleaver and S218 Thermal Stripper, the S199M12 will give you the ribbon splicing solution you need.

Key Fe atu re s
• Your total splicing solution: applicable fibers range from 250 micron single fiber to 12-fiber ribbons.
• 30-second splicing of all fiber types.
• Fail Safe Features: modifiable presplice parameters and red screen alarms ensure good splices.
• Average splice loss of 0.04 dB for single mode fiber.
• Optimized splice programs for all major ribbon fibers, including TrueWave â and Leaf â.
• Small, compact size and insertable battery pack

Splicing Method: Clad Alignment, Fixed V- G r o o v e
Fiber Types: Single and Ribbon Fibers (2, 4, 6, 8, 12 fiber ribbons)
Average Loss: SM/ MM/ DS (dB) 0.04 / 0.03 / 0.07
Splice Time: 3 0 s
Heating Time: 90s for 40mm sleeves; 110s for 60mm sleeves
Applicable Fibers: SM, MM, DS, NZ-DS (Tr u e Wave â and Leaf â)
Coating Diameter: Ribbon: 300-400 microns, Single Fiber: 250, 900 microns
Cleave Length: 1 0 m m
Splice Programs: 21 pre-installed, 11 customizable program slots
Protection Sleeve
Programs: 4 pre-installed (for 40 and 60mm sleeves); 6 customizable slots
Splice Tension Test: 2 0 0 g
Dimensions/Weight: 6″L x 6″W x 6″H / 7.3lbs.
Monitor: 5″ color, 35x magnification
Splice Memory: 150 splices
V-Groove
Illumination: Yes, LED
Power Supply AC: AC: 100-240 V, DC: 12V Insertable Ni-CD Battery

Contact;
Furukawa America, Inc.
200 Westpark Drive
Suite 190
Peachtree City, GA 30269
Tel: 800-274-8335
O.S.P. Sales ext. 113
O.E.M. Sales ext. 120
E-mail: splicers@FurukawaAmerica.com
www.FurukawaAmerica.com

Fiber Optic Multimeter

Fibre Optics Test Equipment Comments Off

Fiber Optic Multimeter  photo fibre optics test equipmentIn the past, fiber optic power meter and fiber optic light source are two different type of fiber optic test equipment; they are usually used together to form the pair in the fiber optic test work. Fiber optic multi meter is a combo of the two, it combines the function of fiber optic power meter and fiber optic light source and the user can easily switch to choose the multi meter function via the control menu.

The fiber optic multimeter test range is classified by -70dBm to +6dBm and -50dBm to +26dBm as two types. Typical working wavelength for this multimeter is 850nm, 980nm, 1300nm, 1310nm and 1550nm in each single unit. Its fiber optic interface is FC Universal 2.5mm adaptor. Output power at -7dBm, spectral Width less than 10nm,Output Stability ±0.05dB/15mins; ±0.1dB/ 8hours,Modulation Frequencies is 270Hz, 1KHz, 2KHz. using the Rechargeable Battery + Battery Charger, it can work continuously for 6 hours under both power meter and light source function or work continuously for 26 hours for only power meter function. It is designed with an auto-off function and it can cut off the power if not work for more than 10 minutes.

This fiber optic multimeter is small in weight (net 300g) and measurement. (180mmx90mmx36.5mm) And is a useful tool for fiber optic network maintenance and testing.

Contact;
Huihong Technologies Limited
Address:
5F of E Building No.8 East Shangxue Industry Area, Bantian Longgang District,
Shenzhen,China 518000
E-mail: sales@huihongfiber.com
Telephone: 86-755-83053246
Fax: 86-755-83464223

Fiber Optic Power Meter

Fibre Optics Test Equipment Comments Off

Fiber Optic Power Meter photo fibre optics test equipmentFiber optic power meter is a test instrument used for absolute optical fiber power measurement as well as fiber optic loss related measurement .This hand held type fiber optic test equipment features ingenious appearance,wide range of power measurement, high accurate test precision and user automatic self calibration function. Fiber optic power meter is a tool for telecom and CATV network.

Our hand held fiber optic power meter features user automatic self calibration function, with backlight on-off optional function, large LCD display window to display optical power in mw, dB and dBm by high display resolution. It is with absolute and relative power measurement, quick response, without warm-up damp, dust and water proof design, pleasant package, low battery consumption (more than 240 hours continual operation time for three 1.5V batteries), light in weight and small in size.

Specifications
Working Wavelength (nm) @ 800~1650nm
Detector Incas
Measurement Range (dBm) -70~+3 or -50~+26 optional (means two types power meter, user can choose to custom design)
Uncertainty ¡À5%
Calibrated Wavelength (nm) 850,1300,1310,1490,1550 (more calibrated wavelength can be optional)
Resolution (dB) Linear 0.1% or Non-linear 0.01dBm
Optical Connector FC/ Universal 2.5mm adaptor (FC, SC, ST interchangeable connector can be optional)
Power Supply Battery (3 AA 1.5V batteries)
Battery Operating Time 240 hours
Operating Temperature(℃) -10 ~ +60
Storage Temperature(℃) -25 ~ +70
Relative Humidity 0 to 95% (non-condensing)
Dimension (mm) 152x74x26
Weight 200g nets

Contact;
Huihong Technologies Limited
Address:
5F of E Building No.8 East Shangxue Industry Area, Bantian Longgang District,
Shenzhen,China 518000
E-mail: sales@huihongfiber.com
Telephone: 86-755-83053246
Fax: 86-755-83464223

AFL / Fujikura CT-30A Fiber Optic Cleaver

Fibre Optics Test Equipment Comments Off

AFL / Fujikura CT 30A Fiber Optic Cleaver photo fibre optics test equipmentThe CT-30 cleavers set the standard for portability, reliability and ease of use. Available for either signle fiber or ribbon splicing (up to 12 fiber ribbons) applications. The CT-30A Cleavers are compatible with all AFL Telecommunications fusion splicers. Designed for excellent portability, the CT-30A is equally at home in a splicing van or in a bucket truck and is ideal for FTTx applications.

The 16-position blade yields 48,000 single-fiber cleaves, or 4,000 12-fiber ribbon cleaves before requiring replacement, and the built-in scrap collector conveniently stores fiber shards until they can be safely discarded.

Features:
* Dimensions (W x D x H): 69mm x 82mm x 41mm (2.7″ x 3.2″ x 1.6″)
* Weight: 180g (0.4 lbs)
* Blade lifetime: 48,000 fiber cleaves (4000 12-fiber cleaves)
* Cleave angle capability: typically < 0.5°

Ordering information:
* Model No: CT-30A
* Applications: Single fibers: 250um to 900um coating, 125um cladding
* Fiber Handling System: AD-30A Adapter Plate
* Cleave Length: (900um fiber) 10mm to 20mm, (250um fiber) 6mm to 20mm
* Part No: S014080

Accessories
* Replacement Blade for CT-30 Series Cleavers: S012828
* FC-02 Fiber Collector: S014092
* AD-30A Adapter Plate: S014096
* AD-30B Adapter Plate: S014100
* FDB-02 Fiber Collector Scrap Box: S014104

Contact;
Fujikura Europe Ltd, Fibre Optics Division
C51 Barwell Business Park
Leatherhead Road
Chessington
Surrey
KT9 2NY, UK
Sales:
Tel: +44-(0)20 8240 2000
Fax: +44-(0)20 8240 2010
Email: sales@fujikura.co.uk

OFL280 FlexTester

Fibre Optics Test Equipment Comments Off

OFL280 FlexTester photo fibre optics test equipmentThe Fujikura Noyes OFL280 FlexTester offers an unmatched combination of fibre optic test functions, ease-of-use, portability, and value. All OFL280 FlexTester models include an integrated single-mode 1310/1550 nm OTDR with PON-optimized and standard test modes, optical power meter, 1310/1550 nm laser source, and visual fault locator.

For many users the two-wavelength OFL280-100 will provide the best balance of functionality and value. Testing at 1310 and 1550 nm is normally sufficient to certify point-to-point or FTTx PON fibers and allows the detection of macro bends. The three-wavelength OFL280-101 and OFL280-102 models add 1625 nm or 1490 nm respectively. Testing at 1625 nm allows testing of the L band. Testing at 1490 nm is required by some network operators to certify FTTx PONs. The filtered, three-wavelength OFL280-103 can certify dark fibers at 1310/1550 nm, fault-locate live FTTx fibers at 1625 nm, and measure FTTx power levels at 1490 and 1550 nm, all from a single test port.

The OFL280 FlexTester user interface provides operating modes suitable for a wide range of users and features a top-down menu structure that is both easy to learn and a pleasure to use.

OTDR test results may be saved as industry standard SOR files, which can be transferred to a PC for viewing, printing, and analysis using supplied Windows® compatible software.
Applications
• PON OTDR – FTTx PON construction certification
• Live Fiber OTDR – FTTx service turn-up and troubleshooting
• Full Auto OTDR – Normal (point-to point) fiber cable
construction testing and fault location
• Expert OTDR – Full function OTDR for experienced users
• Real Time OTDR – Fault location, splice verification, first connector checker
• End Locator – Quickly locate breaks or measure fiber length
• Optical Power Meter – Measure optical power or fiber loss
• Laser Source – Measure end-to-end loss or trace fibers using the tone feature and a Noyes OFI
• Visual Fault Locator – Red laser for fiber bend/break location and tracing

Contact;
Fujikura Europe Ltd, Fibre Optics Division
C51 Barwell Business Park
Leatherhead Road
Chessington
Surrey
KT9 2NY, UK
Sales:
Tel: +44-(0)20 8240 2000
Fax: +44-(0)20 8240 2010
Email: sales@fujikura.co.uk

OFI 400 Optical Fiber Identifier

Fibre Optics Test Equipment Comments Off

OFI 400 Optical Fiber Identifier photo fibre optics test equipmentNoyes Optical Fiber Identifiers are rugged, handheld, and easy-to-use fiber optic test instruments designed to detect optical signals transmitted through a single-mode fiber without disrupting traffic. During installation, maintenance, rerouting, or restoration; it is often necessary to isolate a specific fiber. By simply clamping an Optical Fiber Identifier onto a gently bent fiber, the unit will indicate if there is [No Signal], [Tone], or [Traffic] and identify signal direction.

The OFI 400 model Identifier is equipped with a unique two-position head design that can be configured to work with 250 µm, 900 µm, ribbon, or jacketed fiber in seconds, without tools or adjustments. When testing coated fibers, the slim design of the OFI 400 model allows easier access on a splice tray where the amount of work space is limited. The clamping trigger is ergonomically designed to fit the natural motion of the operator’s hand. A high impact molded plastic case makes the OFI 400 model suitable for use outside plant or in the central office.

The OFI 400 model Identifier is the next generation of Noyes Optical Fiber Identifiers. It has all the features of the OFI 200 model plus easy-to-read LCD display with Backlight, multiple [TONE] signal detection (270 Hz, 330 Hz, 1 kHz, or 2 kHz), power saving feature, and [Set Reference] feature. The OFI 400 model also measures and displays fiber core power or relative power on an LCD display.

The OFI 400 model Identifier is battery operated with the battery indication feature and performs thousands of tests before batteries replacement is necessary.

Features:
•
Rugged, handheld, lightweight
•Accepts 250µm and 900µm coated fiber, 3mm jacketed fiber cable, and ribbon fiber
•No head swapping or adjustments
• Identifies light carrying fiber
• Low insertion loss – traffic remains uninterrupted
• Indicates direction of traffic
• Indicates Tone signal visually and audibly
• 270 Hz, 330 Hz, 1 kHz, and 2 kHz Tone detection
• Easy-to-read LCD display with Backlight
• Measures fiber core or relative power
• Power Off and Set Reference feature
• Battery operated
• Low battery indication
• Low cost, easy to use

Applications:
•Live fiber identification – used during installation, maintenance, rerouting, or restoration to positively identify fibers prior to cutting and splicing
•Tone detection
•The OFI 400 models may also be used for measuring core power or relative power

Contact;
Dennis Beck
Vice President – Services Sales
O: 615-591-0098
C: 678-576-7641

Sponsored links