Four Bar Rotary Cutting and Creasing machine is useful for creasing and cutting simultaneously. The machine is with two pairs of shafts. The front pair is with cutting dies and rear pair is with creasing die. The lower shaft of each pair can be raised or lowered by revolving side wheel. For easy feeding two guides are provided

Technical Specificatin
Size 65” 75” 85” 95” 105” 125”
SPEED/MINUTE 300 FT/MIN 300 FT/MIN 300 FT/MIN 300 FT/MIN 300 FT/MIn 300 FT/MIN
MINIMUM DISTANCE BETWEEN TWO DIES 3″ 3” 3″ 3” 3” 3”
POWER REQUIRED 1.5 H.P 2 H.P. 2 H.P. 2 H.P. 3 H.P. 3 H.P.
fLOOR SPACE 85”X52” 98”X52”’ 110”X52” 120”X60” 130”X60” 150”X70”
GROSS WEIGHT 1700 KGS 2100 KGS 2300 KGS 2500 KGS 2700 KGS
3200 KGS

Contact;
Senior Engineering Corporation
P.No.321, Focal Point, Mehta Road
Amritsar (Punjab.) India 143001
Phone : +91-183-2586706
Mobile : +91-93160-99121
: +91-98154-77541
: +(91)-90234-23687
Email : info@corrugatedmachinery.net

This machine is utilized for printing, creasing, trimming, slotting and corner cutting of the sheet simultaneously. The three sections of the machine-feeding, printing and creasing-slotting can be separated from each other for easy access to the operator.

Technical Specifications :
Size
(in inch) Motor H. P. Slot Depth Max.
(in inch) Sheet size fed (in feet) Floor Space
(in feet.)
1-col. 2-col. Min. Max.
50 X 72 0.5 10.0 12.0 14X12 50 X 72 10 X 25 10 X 28
60 X 84 7.5 15.0 14.5 18 X 30 60 X 84 11 X 27 11 X 30
70 X 95 10 15.0 17.0 24 X 30 70 X 95 13 X 32 12 X 32

Contact;
Assopack Machines
Address :
73-74 Ashapura Indl. Estate,
B/H Alankar Boilers,
Nr Ramol Chokadi,
G.I.D.C. Phase IV,
Mahemdabad Road, Vatva,
Ahmedabad-382445.
Telephone :
+91 – 079 – 25840180

Pre-creaser is installed to prevent board damage. Gap between pre-creasing heads is motorized adjust with digital display.
Pre-creaser heads, creaser heads, slotter heads are robust yoked, and moving with precise guide system for precisely position.
Creaser heads with top polyurine wheel, and bottom male steel wheel. Gap between creasing wheels is motorized adjust.
All tools for making the box dimension can be adjusted by computer or motorized. Include adjusting of heads intervals, box height and 360° register. It can be adjusted when the machine is running or stop. With auto return to Zero.
Gap for slotting is motorized adjust.
Fixed middle slotting heads.
Total 999 orders can be preset and memorized by computer.

Contact;
Address : Suite 24B,Ou Jiang Building,No.768,Zhao Jia Bang
Road,Shanghai 200030, CHINA
Website : http://www.srpack.net
E-mail : srpack@sh163.net

FEATURES
Chain Feeding System is used to send board, with simple adjustment and high working efficiency.
The Upper Slotter roller has a 360 degree circumferential movement for running register control operated manually.
4 sets of Slotting Heads and 4 sets of Creasing Heads.
SHIFTING of upper and lower slotting heads along with creasing heads is done manually.

CONTACT
PRIME MECHANICAL WORKS (PVT) LTD
AddressOff Bank Stop Kamahan Road, Near Azam Chowk,16-km Off Ferozepur Road, Lahore-Pakistan.
Phone Tel: 0092-42-35923024, 35923025, 35923100
Fax Fax: 0092-42-35923026
Cell Cell: 0092-300-8443167

This machine is used for trimming, creasing, slotting and corner cutting of sheets simultaneously. It has four creasing heads, four trimming heads, three slotting heads & one feed the board. The creasing and slotting heads are easily adjustable to the required size.

Technical Specifications
Machine size
48″ x 75″
48″ x 85″
48″ x 95″
Power required (HP)
3
3
5
Floor Space
125″ x 140″
125″ x 150″
125″ x 160″
Sheet size fed (Min/ Max)
14″ x 24″ / 48″ x 75″
14″ x 24″ / 48″ x 85″
14″ x 24″/ 48″ x 95″
Gross weight (kgs)
3000
3250
3500
Production capacity (Min)
50
50
50
Slot Depth (Max)
12″
12″
12″

Contact Details
SUPER CUT INDUSTRIES
f 5, nand jyot indu estate, kurla anderi road, safed pool, saki naka,Mumbai – 400072, Maharashtra, India
Phone:91-22-28500052/28560049/28514421/8531
Fax:91-22-28500052/28560049/28514421/8531

The SV Flexo Folder Gluer addresses the need of today’s challenging corrugated market. Designed to be a reliable, robust product that is easy to operate. Available in 37.5″, 50″, 66″, and 75″ repeats. Widths ranging from 96″ – 185″.

Benefits:
Extended feed for better accuracy
Accurate color to color registration
Independently driven continuous vacuum folder for more accurate folded boxes
Accurate and reliable down stacking counter ejector

Standard Features:
Reliable and accurate extended feed Belt style lead edge vacuum feeder
1:1 Scoring for better quality
Single or chambered blade metering systems
Fine tune box depth and lateral position on the fly

Contact;
MarquipWardUnited España
Updated Feb 26, 2010
Av. Meridiana 358 planta 9 C
08027 Barcelona
Spain
Phone: 34 93 360 0450
Fax: 34 93 711 74 25

Gluer section with upper glue roll and lower glue roll.

Upper glue roll’s glue cup with spring cushion, can adjust the glue to precise feeding, special design glue cup is easy discharge and easy washing.

Lower glue roll with air cylinder, when paper stuck or need to do the cleaning easy to low down the glue roll with the air cylinder.

Recycling glue system supplies glue uniformly, the uniglue cup can assist the recycle more smoothly, over load glue can flow back to glue tank.

Paper board can pass the prepress roll, before delivering to glue section to make the fold part flat and easy glutinosity, prevent the crown in center of paper board.

Max Sheet Size (WxL) 1280mm x 2700mm Max Sheet Thickness
10mm
Min Sheet Size (WxL) 250mm x 600mm
Power Required 18.25 HP
Main Panel Size Max. (A) 900mm Min. (A) 150mm
Machine Size 12350mm x 3800mm x 2600mm
Side Panel Size Max. (B) 900mm Min. (B) 70mm
Machine weight 12, 500 kg approx
Folder Speed 90 m / min maximum

Contact;
PAPER BOARD MACHINERY COMPANY
Regd. Office :
115, D.L.F. INDUSTRIAL AREA PHASE – 1, FARIDABAD – 121003, HARYANA (INDIA)
Contact Numbers : Tel : + (91) – (129) + 3295771, 4107814 Telefax : + (91) – (129)-2275894
Mobile : 0091 – 9810256789, 9811071540, 9818056789
E-mail : paperboard@gmail.com bharatnagpal@msn.com

The Most User Friendly Gluer in the Industry!

The New Omega Folder Gluer has so many new features, and an entirely new look, that we had to give it a new name!

New production enhancing features
Modular, Reversible Side Register Section
Upper and Lower Center Carrier
All self-diagnostic Siemens AC drives and motors
Touch screen control with integrated counter
New modular feed carriers with vacuum assist
New rack-style blank support in the feed
Individual feedbelt tensioning with cam-action release
New in-line “trap door” ejection system in final fold
Pneumatic style compression

High Speed Production of most cartons styles
Straight Line
Double Wall
Automatic Lock Bottom

Split Carrier Prefold on Omega ALLPRO 80, 110 and 130 Models increases flexibilty and versatility while speeding makeready
Inner Partition Cartons
Z-Fold Cartons
Compound Fold Cartons

Contact;
Can-Am
603-635-1316 voice
603-635-7139 fax
30 Pulpit Rock Road
Pelham NH 03076
USA

The Marathon has the ability to produce a variety of layouts. The construction of the Marathon Folder/Gluer has made it the leader in its class. The unique folding plate coupled with the Tipper Plate sets the Marathon in a class by itself. The pulse control feeding mechanism and electronic pile height controlled feeder are just the beginning of a revolutionary pocket folder.

Features:
Moll automatic fold roll settings
Tipper Fold Plate with dual anti-marking rollers which allow for heavier stocks to be folded
Moll super-grip fold rolls and stainless steel buckle fold plates and formers
Unitized steel frames and DC speed control
Optional bottom fold plate
Dual pump system
Dial-A-Stack

Contact;
B&R MOLL, Inc.
124 Railroad Drive
Northampton Industrial Park
Ivyland, PA 18974
TOLL FREE: 866.438.4583
TEL: 267.288.0282
FAX: 267.288.0284

GDHH-1300 Pre-fold and Lock-bottom Automatic folder gluer belongs to the equipment with four-folded and lock-bottom. Possessing the features of high speed, reasonable structure and convenient and flexible operation etc. It is suitable for the pasting process, such as the lock bottom-medicine box, wine box, cosmetic box etc. As well as pasting the paper box without lock-bottom.

Characteristics:
Max. linear speed: 220m/min
Available paper: 220-800gsm card paper and E wave corrugated paper
Power consumption:AC 380V 8kW
Pasting box basic form: One-side edge pastes, two-side edge pastes, base pastes Both sides are folded, both sides are pre-folded. in Order to convenient to paste
Feeding way: automatically and continuously feeding.
Adhesive: solute type
Overall dimensions: 9200×1400x1350mm

Contact Us
Wenzhou Gaotian Packing Machinery Co., Ltd.
No.17, Fapai Road, Wuqiao Industrial Area, Wenzhou, Zhejiang
Tel: 0086-577-65879127
Fax: 0086-577-65879127
Email: sales@folder-gluer.com