Sponsored links

 

VCT Vacuum Chamber Packaging Machine

Vacuum Chambers Comments Off

VCT Vacuum Chamber Packaging Machine photo vacuum chambersVCT Vacuum Chamber Packaging Machine
Starview’s vacuum packaging machines are designed and built for industrial applications, with ease of operator training and operation. An advanced technology vacuum pump insures total reliability and long term performance.

These vacuum packaging machines are suitable for use with non-barrier as well as barrier plastic bags. Heat sealable foil bags may also be used in these models.

These systems are competitively priced making them ideal for contract packagers or small to medium batch food processers.

Features of the VCT
Food grade vacuum packaging machines ideal for laboratory sampling or small to medium batch production.
Three different vacuum chamber sizes available to accommodate a range of package sizes.
Automatic vacuum & sealing cycles.
Table top and floor model machines offered.
Heavy-duty stainless steel vacuum chamber and housing construction.

Contact;
Profesional Packaging Systems
Call 888-318-0083

KOCH 800 DOUBLE CHAMBER VACUUM PACKAGING MACHINE

Vacuum Chambers Comments Off

KOCH 800 DOUBLE CHAMBER VACUUM PACKAGING MACHINE photo vacuum chambersOur new Koch 800 double chamber vacuum packaging machine has been designed for economical, single operator efficiency in a a daily use environment where operational simplicity and mid-range production speeds are required. The machine’s 10-inch chamber depth enables operators to handle a wide variety of products from individual steaks and chops to primal cuts.

Benefits
- Increases production efficiencies
- Improves package quality
- Extends shelf life
- Minimizes rework

Features;
- Stainless steel construction
- 10-hp rugged vacuum pump
- Four large sealing stations including two 31.5-inch seal bars per chamber
- 10mm wide-band seals
- 10-inch chamber depth
- NEMA-4 digital control panel
- Vacuum sensor
- High-density plastic filler plates
- Air-assisted sealing capable
- Easy access panel doors for easier maintenance
- Locking, heavy-duty casters
- Assembled in USA

Chamber dimensions 29.5-in. x 37.4-in. (750mm x 950mm)
Chamber depth 10-in. (254mm)
Seal bar length 4 x 31.5 (800mm)
Distance between seal bars 24-in. (610mm)
Outside dimensions 75-in. L X 36.5-in. W X 47.5-in. H (1,095mm X 927mm X 1,206.5mm)
Working height 37.5-in. (952.5mm)
Vacuum pump 10-hp (180 c.f.m.)
Electrical 240 volt, 60Hz, 3-phase
Cycle times 24 seconds per cycle
Net weight (5-hp model) 1,128-lbs.
Net weight (10-hp model) 1,330-lbs.

Contact;
Koch
1414 West 29th Street
Kansas City, MO
64108-3604 USA
Tel: 816-753-2150
Fax: 816-753-4976
info@kochequipment.com

8600S Rotary Vacuum Chamber System

Vacuum Chambers Comments Off

8600S Rotary Vacuum Chamber System photo vacuum chambersRotary chamber vacuum machine that tackles sanitation concerns of processors in the ready-to-eat market
• Advanced models that automatically vacuum package food products in Cryovac® bags
• Developed according to American Meat Institute (AMI) and National Sanitation Federation guidelines
• The only system designed to meet the 10 AMI strict sanitary guidelines for day-to-day cleaning and inspection
• Stainless steel components and fasteners eliminate corrosion and simplify sanitation and cleaning efforts
• PLC controls provide advanced monitoring and troubleshooting capabilities
• A fully automatic central lubrication system ensures all critical wear components are properly lubricated at all times

Specifications
• Speeds up to 60 cycles per minute
• Can handle bag widths up to 14″
• Max. Product Size: 6″ H x 10″ W x 16″ L
• One set of product supports
• Dual seal wires
• Machine-mounted soft discharge system
• Standard 4 ft. discharge conveyor
• Standard spare parts kit
• System status readout and fault monitoring
• Convenient automatic central lubrication system
• Dual 3 mm wide impulse seal ribbon

Contact Us
Cryovac Food Packaging and Food Solutions
100 Rogers Bridge Road
Duncan, SC 29334
Tel: 800-391-5645

Chamber Machine C 200

Vacuum Chambers Comments Off

Chamber Machine C 200 photo vacuum chambersThe C 200 takes up very little space and offers fast, efficient packaging, with a higher evacuation capacity. It also offers additional options, however, including the ability to create Modified Atmosphere Packaging (MAP). It is simple to operate and to clean, and delivers first-class, consistent packaging results.

Features;
• Compact size
• Stainless steel construction
• Powerful pump
• Safety glass window
• Quick change seal bar
• Filler plates
• Microprocessor control
• Automatic progressive ventilation
• Vacuum “quick-stop”

Specifications
• Stainless steel chamber housing
• Composite lid with safety-glass viewing window, lid height: 150 mm
• Stainless steel tilted insert for liquid products
• Slide-in sealing bar
• Double-seam sever-sealing at bottom (1 x 3, 1 x 1 mm)
• Insert plates for sealing height adjustment
• Control unit: MC 06, stores up to 29 programs, 18 menu languages

Contact;
Multivac Sp. z o. o.
Natalin, ul. Ziemska 35
21-002 Jastków k. Lublina
Poland
+48 81 746 67 00
+48 81 746 67 01
mupl@multivac.pl

ULTRAVAC® 225 VACUUM PACKAGING MACHINE

Vacuum Chambers Comments Off

ULTRAVAC® 225 VACUUM PACKAGING MACHINE photo vacuum chambersThe Ultravac 225 – our smallest vacuum packaging machine – is ideal for entry-level vacuum packaging, restaurants or lab work but big on features.

Benefits
Eliminates freezer burn Extends shelf life Provides quality vacuum sealed packages

Features
Quick-change 16-in. seal bar Large capacity chamber Compact tabletop model consumes less than 3.25 square feet of counter space Simple operation and easy-to-use controls High density polyethylene filler boards NEMA-4 rated controls Patented lid hinge system minimizes stress on lid to eliminate cracking

Seal bar length 16-in. Chamber Size 16.75-in. L x 19.56-in. W x 7.2-in. D Machine dimensions 19.25-in. L x 25-in. W x 32.25-in. H (maximum height) Vacuum pump 1.25-hp Electrical 110 volt, 60Hz (single phase), 220 volt, 50Hz (single phase), or 208/230 volt, 60Hz (3-phase) Net weight 121-lbs.

Contact;
Koch
1414 West 29th Street
Kansas City, MO
64108-3604 USA
Tel: 816-753-2150
Fax: 816-753-4976
info@kochequipment.com

Sanitation Bag Machine GZR-S500/700

Polybag Making Machines Comments Off

Sanitation Bag Machine GZR S500/700 photo polybag making machinesMicro-computer technology is adopted to control frequency conversion and speed modulation of the main motor. This bag machine features photo-electric tracking, fixed length setting, ultrasonic heat sealing of slide fasteners, accurate position stopping, and high speed bag production. Included is an automated counter alarm. This machinet is ideal for manufacturing PE into soft plastic packaging for napkins and toilet paper.

General:
Bag Length: 450mm to 1050mm
Bag Width: 40mm to 850mm
Feeding Speed: 50m/min
Voltage of Power Supply: 380V / 220V, 50Hz
Power Consumption: 3.5kW
Machine Weight: 1000kg

Contact
PEC Plastic Equipment Co. Ltd.
#107-11480 Blacksmith Place
Richmond, B.C. Canada V7A 4X1
Phone: 604-277-1176
Fax: 604-277-1274
Toll Free: 1-888-277-1176

MODEL -34 HEATED HANDLE CUT SYSTEM

Polybag Making Machines Comments Off

MODEL  34  HEATED HANDLE CUT SYSTEM  photo polybag making machinesPARK AIR™’s most adaptable Handle Cut System. This unit is designed for use with either sideweld or bottom seal bag machines (up to 5 across on a 60″ width). The new heated blade makes it possible to cut cleaner looking handles in any polyethylene or polyethylene blend with greater blade life at greater speeds. The unit is able to slide across the bag machine and has a pneumatic locking frame system which holds it in place and allows for fast position changes.

The Heated Handle Cut System is an electrically activated, air powered unit. The unit is capable of accepting a virtually infinite variety of shapes and sizes. Speeds up to 250 cycles per minute on a production basis. Venturi vacuum system is used to remove slugs automatically. Cutters are made of spring steel, heat treated for longer wear and plated for smoother action.

FEATURES / BENEFITS
Instantly adaptable for bottom seal or sideweld bag machines
Up to 250 cycles per minute on a production basis
Instant slug ejection
P.I.D. Temperature control
Air operated/electrically activated
For any intermittent bag machine
Special shapes quoted on request
Venturi or high-efficiency vacuum collector available

Contact;
Jenton International UK
9/10 Ardglen Industrial Estate, Evingar Road, Whitchurch, HAMPSHIRE RG28 7BB
UNITED KINGDOM
Tel:+44 (0)1256 892194 Fax:+44 (0)1256 896486

GZ-R500/700 Bottom Seal Roll Bag Machine

Polybag Making Machines Comments Off

 GZ R500/700 Bottom Seal Roll Bag Machine  photo polybag making machinesMicro-computer technology controls the frequency conversion and speed modulation of the main motor. A display of operating instructions is available on a screen. This bottom seal roll bag machine features light tracking, fixed length setting, accurate position stopping, and high speed bag production. An automated counter alarm is also included. This bottom seal roll bag machine is ideal for processing PE and BOPP into soft plastic bags and garbage bages with perforated rolls..

Features of the bottom seal roll bag machine:
General:
Bag Length: 10mm to 1500mm
Bag Width: 40mm to 650mm
Machine Weight: 1000kg
Feeding Speed: 50m/min
Power Supply Voltage: 220V, 50Hz
General Power Consumption: 3.5kW
Overall Dimensions (mm): 4000 × 1600 × 1700

Contact
PEC Plastic Equipment Co. Ltd.
#107-11480 Blacksmith Place
Richmond, B.C. Canada V7A 4X1
Phone: 604-277-1176
Fax: 604-277-1274
Toll Free: 1-888-277-1176

PBI 24/32/42 Polybag Inserter System

Polybag Making Machines Comments Off

PBI 24/32/42 Polybag Inserter System photo polybag making machinesThe new generation of K&R PBI Systems is designed to provide a cost effective way to increase productivity of existing bulk packing facilities, as well as ease the conversion from manual and semi automatic operations to high-tech automation.

Erects a top and bottom open shipping case Inserts a polybag from pre-made flat or gusseted polyethylene bags on a roll. Opens the bag and cuffs it over the edges. Bottom seals the case with tape or hot melt glue and exits machine.

Key features:
- All-in-one rugged design.
- Patented case lining process.
- Small foot print.
- Tape or hot melt.
- Allen Bradley PLC.
- SEW motors & gear boxes.
- Norgren valves & cylinders.
- Full Lexan interlocked guarding.
- Power flaps closure.
- OKI “Blue Max” taping heads.
- Tough box performance.

Contact;
K&R Equipment, Inc.
2033 Gateway Place
Suite 500
San Jose, CA 95110
tel: 408-573-6472
fax: 408-573-6471
sales@kandrequip.com
For packaging replacement parts: (800) 700-5677

Better Bagger 900e

Polybag Making Machines Comments Off

Better Bagger 900e photo polybag making machinesBetter Packages, Inc. has introduced the world’s most versatile poly-bag making system called the Better Bagger 900e. It is a unique table-top machine that will create plastic bags on-demand. This state-of-the-art system will dispense, cut and seal poly bags instantly. You can now produce bags in the size and quantities you want with a press of a button and save up to 40 – 60% versus most pre-made bags. The poly-bag making system gives you a combination of flexibility and savings unlike any other machine in the industry.

By utilizing rolls of polyethylene tubing and cutting bags to your desired size, you no longer need to order specified sized bags and you will reduce your inventory cost as well. The Better Bagger 900e can make bags up to 99 inches (251cm) long and 8 inches (23cm) wide. If you are using narrow tubing you can create bags from 2 to 3 rolls of tubing at one time and triple your output.

There is an unlimited use for the poly-bag making system . It is currently used in such industries as tool & knife manufacturing, cable and wiring, food, electronic, cell phone tower manufacturing and paper manufacturing. Some of the companies using the

Better Bagger are:
• Hubbell Wire (Electrical)
• Arkwright Paper (Specialty Papers)
• Immedica, Inc. (Health)
• Spellman Electronics (Computers, Electronic Boards)
• Synthes
• MTS Wireless (Cell Tower Components)

BP900e Better Bagger® System Specifications
Better Bagger Size: 20″ Height: 10″ Depth: 20 3/4″ Weight: 52 lbs.

Contact;
Better Packages
P.O. Box 711
255 Canal St.
Shelton, CT, 06484
Phone (US only):
(800) 237-9151
Outside US:
(203) 926-3722
Fax: (203) 926-3705
info@betterpackages.com

Sponsored links