Sponsored links

 

SMI® Standard Wizzard Snowmaker

Fan Guns Comments Off

SMI® Standard Wizzard Snowmaker photo fan gunsSMI’s Wizzard series was designed for resorts facing marginal snowmaking conditions. Whether it’s warmer temperatures, high humidity or both, these snowmakers deliver optimum performance, both in quantity and quality. The Standard Wizzard is SMI’s mid-size snow machine for medium throws and exceptional value. The Standard Wizzard is offered in a variety of tower and carriage mounts, with an onboard compressor or hill air feed, and equipped for manual or automatic operation.

The Standard Wizzard snow machine uses a 15 HP (11 kW) fan and four rings of 75 heated nozzles per ring that you can customize to suit specific snowmaking conditions. These 300 heated nozzles are nucleated by a built-in ring of 20 nucleator nozzles on the periphery of the spray manifold. Water flow is easily controlled by three heated, self-draining valves.

Mount: 10.5’ or 15.5’ (3.2 m or 4.7 m) tower or 3 wheel galvanized steel carriage
with Snowcat lifting brackets
■ Electrical: Three phase
■ Fan:
Horsepower: 15 HP (11 kW)
Fan Speed: 1760 rpm (1760 U/m) at 480V/60Hz
1450 rpm (1450 U/m) at 400V/50Hz
Propeller: SMI patented aluminum
Screen: Stainless steel
■ Air:
Compressor at 480V/60Hz: 5 HP (3,7 kW) Hydrovane, 22 cfm at 100 psi (10,4 l/s at 7
bar) or hill air 60-100cfm at 80psi (28,3 l/s – 47,2 l/s at 5,5 bar)
Compressor at 400V/50Hz: 5 HP (3,7 kW) Hydrovane, 22 cfm at 100 psi (10,4 l/s at 7
bar) or hill air 60-100cfm at 80psi (28,3 l/s – 47,2 l/s at 5,5 bar)
■ Heating: 225 W
Optional spray nozzle heater 500 (at 400V/50Hz), 1300 W (at 480V/60Hz)
900 W Additional if Hill Air

Contact;
Snow Machines, Inc.
1512 North Rockwell Dr.
Midland, MI 48642
Tel: +1.989.631.6091
Fax: +1-989-631-3162
Toll Free: +1-800-248-6600
www.snowmakers.com

BK75S Snow Gun

Fan Guns Comments Off

BK75S Snow Gun photo fan gunsStandard features:
Maintenance-friendly machine design
Illuminated operating panel
Simple to operate using knob switch
Economical snow-making even at temperature limits
Makes snow at -1 °C wet bulb temperature and lower
Integrated temperature and humidity sensor
Illumination for monitoring the snow pattern
10 pre-set snow-making programs from 350 kg/m3 to 650 kg/m3
Unlimited full-circle pivoting range
Automatic pivoting gradually adjustable from 30° to 180°
Snow gun inclines up to 53°
Snow thrown up to 50 m
Snow groomer bracket mounted on frame
Water drains automatically even with power down
Including hydrant motor
Intergration in snow control center

technical data:
Average power consumption during snow-making 14,6 kW
Nucleation nozzles 30
Water nozzles 150
Maximum water flow rate at 10 bar / 25 bar 21,7m³/h / 33,8m³/h
Water flow at -1,1°C wet bulb temperture 100l/min
Water pressure 10 bar and higher

Contact;
TechnoAlpin Austria GmbH
Stadlweg 25
A-6020 Innsbruck
Telephone +43 (512) 341 501
Fax +43 (512) 341 501-4
www www.technoalpin.com
e-mail info@technoalpin.at

Snowmaking Product TOPGUN

Fan Guns Comments Off

Snowmaking Product TOPGUN photo fan gunsTOPGUN is not so much a name as it is a statement. It is the “TOP” low-air/water tower snow”GUN” on the market today available as either a low-air/water tower snowgun or as a retrofit module for your existing towers. The capabilities of the TOPGUN snowgun is unmatched being compared to that of an electric fan snowgun, all at less than 1/10 the cost! The TOPGUN is even priced less than existing single-stage low-air/water tower snowguns. The price and performance of the TOPGUN are unparalleled.

The TOPGUN snowgun is designed specifically to be used in environments of variable temperatures where different water rates are necessary to maximize snow production. The TOPGUN snowgun achieves this in the easiest manner while maximizing your return on investment.

The TOPGUN snowgun is designed to be easily moved, changed, and fine tuned for those who operate the equipment in the middle of the night. TOPGUN was also designed to be a cost effective solution for those who pay the bills. TOPGUN generates lower operating and capital costs while increasing revenue and margins. This is the TOPGUN cornerstone.

Contact;
TOPGUN Snowmaking Systems
100 Buttermilk Road
Hinsdale, MA 01235
(413) 441-3783
info@topgunsnowguns.com

ST Series Snowgun

Fan Guns Comments Off

ST Series Snowgun photo fan gunsAluminum chassie with ball bearing turn ring on three zinc plated steel legs with MSD; Glass- Fiber composite barrel with nozzle ring; horizontal turn; manual 360° – electric in sectors of 25° 40° & 55°; vertical with hand crank 0 –40° adjustable; Fan with 16 (ST540) or 12 (ST380) special plastic fan blades; Atlas-Copco oil compressor; 180 micron water filter; cooling of the atomizer air; electric valves at
the water manifold to open and close the nozzle rings. Water connection
at the water manifold is standard.

Electrical cabinet
Heated electrical cabinet with automatic protection, contactors and
motor protection, thermostat, alarm lamp, control panel with labeled
buttons, protection class IP 65.
Ground leakage circuit breaker—63A
Release current 100mA
Electrical socket 480v 63a 3 ph

Weight (lbs) with MSD 1153 1232
L x W x H (transport-in) 67 x 47 x 73 67 x 47 x 73
Nucleator Nozzles 25 27
Water Nozzles 4 x 64 4 x 90
Fan (kW) 11.0 15.0
Compressor (kW) 4.0 4.0
Heating (kW) 4.5 5.0
Total Power 20 24.0
Throw (ft) 115 – 165 130 – 196
Water Pressure (PSI) 116 – 507 116 – 507
Water Flow (GPM) 12 – 100 17 – 143
Max Snow Production (ft3/h) – snow weight 881 lb/yd3 75 106

Contact;
Lenko Snow USA
551 Queensbury Ave., Suite 4
Queensbury, NY 12804
518-743-9193

Fan gun M18 Automatic

Fan Guns Comments Off

Fan gun M18 Automatic photo fan gunsFan gun M18 Premium – Technical data
Length (with undercarriage) 114 inch
Width (with undercarriage) 96 inch
Height (with undercarriage) 92 inch
Weight of gun 1224 lb
Weight of undercarriage and supports 364 lb
Rotation 360 deg.
Max. angle 45 deg.
Connected load 12,5 kW
Compressor 4 kW
Heating 0,3 – 1,0 kW
Voltage 480/600 V
Frequency 50/60 Hz
Connecting plug (CEE compliant) 63 A
Kamlok water coupling 2“
Min. water pressure 116 PSI
Water filter 250 micron
Fixed nozzles 10 Quadrijet
Variable nozzles 10 Quadrijet
Nucleators 5

Contact;
TechnoAlpin Austria GmbH
Stadlweg 25
A-6020 Innsbruck
Telephone +43 (512) 341 501
Fax +43 (512) 341 501-4
www www.technoalpin.com
e-mail info@technoalpin.at

Sponsored links