Sponsored links

 

Case 865VHP Motor Grader

Motor Graders Comments Off

Case 865VHP Motor Grader photo motor gradersPowershift direct-drive transmission provides the flexibility for manual control to best match job conditions, or automatic shift when roading between job sites.
A-frame drawbar and high-strength circle provide stability, power and maximum turning performance to the moldboard.
Multi-radius involuted moldboard design increases the volume of dirt moved with less horsepower required and increased fuel economy.
Low-effort control levers are positioned within easy reach for operator comfort.
Floor-to-ceiling cab glass provides a clear view of the moldboard and superior all-around visibility.
Rear ripper accomodates up to five teeth.
Front scarifier accomodates up to 11 teeth.
Grease zerks are easily accessed from ground level to speed daily service duties and increase productivity.
Convenient service door allows easy access to electrical connectors without removing interior cab panels.
Maintenance friendly flip-up hood improve access to engine components and daily check points.
Exclusive ground-level fuel fill with lockable cap means no more climbing on the tandems to reach the fill port.

Circle Diameter 69″ | 1.7 m
Turn Radius 23′-9″ | 7.2 m
Engine Power 180/190/205 hp | 134/142/153 kW
Weight on Front Wheels 9,464 lb | 3707 kg
Pump Flow 24 gpm | 91 L-m
Reach Past Wheels Right / Left 4′-9″ | 1.4 m
Transmission Type / Speed Ranges Direct Drive / 8 fwd 4 rev
Weight on Tandem Wheels 22,822 lb | 10342 kg
Blade Length (Standard) 13′-0″ | 3.9 m
Standard Moldboard Length 13′-0″ | 3.9 m
Operating Weight 32,235 lb | 14635 kg
Articulation 25°
Max Speed Fwd / Rev 26.6 mph | 42.9 kph / 17.7 mph | 28.5 kph

Contact;
Attn: Case Customer Assistance
c/o CNH America LLC
621 State Street
Racine, WI 53402
Phone
Case Customer Assistance Team
1-866-54CASE6 (1-866-542-2736)

John Deere 770G/GP Motor Grader

Motor Graders Comments Off

John Deere 770G/GP Motor Grader photo motor gradersOffering one-of-a-kind advantages and unequalled options, our 770G Motor Grader lets you decide how the work gets done. Loaded for bear, or barely loaded, each of these brawny blades comes standard equipped with the same heavy-duty durability and uptime-boosting features including a fuel-efficient nine-liter PowerTech™ diesel. Easy-access filter bank. And simple-to-clean swing-out coolers. That’s only the beginning, the 770G is loaded with time- and money-saving features that help keep maintenance manageable.

Features and Specs
IT4 certified engine
All models come equipped with steering wheel (GP’s also come with lever steer)
GP’s come standard with cross slope
Trouble-free servicability

Net Power 245 hp (183 kW) @ 2,100 rpm
Net Peak Torque 905 lb.-ft. (1 227 Nm)
Blade Pull 28,990 lb. (13 150 kg)
Torque Rise 63%

Contact Us
Deere & Company World Headquarters
One John Deere Place
Moline, Illinois 61265

Volvo Motor grader G960

Motor Graders Comments Off

Volvo Motor grader G960 photo motor gradersWhen high production is required you need a reliable motor grader that delivers every time. The Volvo Model G960 Motor Grader clears the path to doing more with the power and weight to get all your big jobs done.

A high blade down force of 8 823 kg (19 421 lbs) allows deep cuts without front end drift

Maximum blade pull of 11 205 kg (24 705 lbs) helps you get the most out of each pass

Low-emission, turbocharged Volvo diesel engine provide a maximum power output of 175 kW (235 hp) and is Tier 3 / Stage IIIA compliant

Hefty 17 550 kg (38 690 lbs) base operating weight ensures high productivity without wheel spin

Full powershift Volvo-designed HTE840 transmission with eight-forward/four-reverse speeds gives you the flexibility of multiple operating modes and smooth shifting for fast grading

Innovative shuttle feature gives you smooth shifting between any forward or reverse gear without using the inching pedal for efficient, effortless control that reduces operator fatigue

Shock-reducing mounts and sound-absorbing material provide an extremely low cab noise level, increasing comfort and reducing operator fatigue

G960 Specifications
Engine Volvo D7E
Net engine power 195-235 hp (145-175 kW)
…Low Range 195 hp (145 kW)
…Mid Range 215 hp (160 kW)
…High Range 235 hp (175 kW)
Operating weight 38,690 lbs (17,550 kg)
Overall length 360 inches (9,150 mm)
Wheelbase 247 inches (6,280 mm)
Blade Pull at 0.9 co-efficient of friction 24,705 lbs (11,205 kg)
Blade down pressure 19,421 lbs (8,823 kg)

Contact;
Volvo Construction Equipment
Demonstration Center
575 Goldview Road
Weaverville, NC 28787
United States
Phone: +1 828 650 2000

Komatsu GD555 Motor Grader

Motor Graders Comments Off

Komatsu GD555 Motor Grader photo motor gradersThe GD555 gets exceptional power and efficiency from the turbocharged and air to air aftercooled engine. Output is 119kW 160 HP SAA6D102E (variable horsepower in higher gears) providing excellent tractive effort with good fuel efficiency.

Electronic Overspeed Protection helps prevent engine and transmission damage from premature downshifting and grade-induced overspeeding.
Electronic Transmission Control produces smooth shifting, which enables the operator to maintain a uniform grading surface if shifting is required. Smooth shifts also extend the life of the transmission by placing less stress on transmission clutches. A single lever controls direction, speed and parking brake.

Easy Access to Service Areas
• Large hinged doors are standard and provide easy access to the engine and radiator service points. Spin-on oil filters can
be changed quickly.
• Lubrication points for articulation joint are remote-mounted.
• Fuse panel is located in the operator compartment. Circuits and fuse sizes are clearly identified.
• Tandem oil check point is conveniently located at the end of the tandem.
• Service meter is located on the left side of the steering console, offering a clear view from the ground.

Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu SAA6D102E-2
Type . . . . . . . . . . . . . . . . . . . . Water-cooled, 4-cycle, direct injection
Aspiration . . . . . . . . . . . . . . . Turbocharged and air to air aftercooled
Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 mm 4.02″
Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 mm 4.72″
Piston displacement. . . . . . . . . . . . . . . . . . . . . . . . . . 5.88 ltr 359 in3
Gross horsepower
Gear 1~3 . . . . . . . . . . . . . . . . . . . . 110 kW 147 HP@2000 rpm
Gear 4~8 . . . . . . . . . . . . . . . . . . . . . . 125 kW 167 HP@2000 rpm
Net flywheel horsepower*
Gear 1~3 . . . . . . . . . . . . . . . . . . . . . . 104 kW 140 HP@2000 rpm
Gear 4~8 . . . . . . . . . . . . . . . . . . . . . . 119 kW 160 HP@2000 rpm
Peak torque
Gear 1~3 . . . . . . . . . . . . . 576 Nm 58.7 kg.m 425 lb.ft@1500 rpm
Gear 4~8 . . . . . . . . . . . . . 729 Nm 74.3 kg.m 538 lb.ft@1500 rpm
Torque rise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 %
Fan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 blade, pusher
Air cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-stage, dry-type
Electrical . . . . . . . . . . . . . . . . . . . . . . . 24 volt with 50 amp alternator
Battery . . . . . . . . . . . . . . . . 2, low maintenance plus, 12 volt, 112 Ah

Contact;
Komatsu America Corp.
One Continental Towers
1701 W. Golf Road
Rolling Meadows, IL. 60008
U.S.A.
Tel. 1 (847) 437-5800

24M Motor Grader

Motor Graders Comments Off

24M Motor Grader photo motor graders OPERATOR ENVIRONMENT
Air conditioner/heater, modular
Armrest, adjustable
Articulation, automatic Return-to-Center
Ashtray and lighter
Cat Messenger, operator information system
Coat hook
Cup holder
Display, digital speed and gear
Door, driver access (left and right sides)
Fan, defroster, rear window
Gauges – articulation, engine coolant temp,
Hour meter, digital
Joystick hydraulic controls
Lights, night time cab
Mirror, inside rearview, wide angle
Power port, 12V
Precleaner, Cab HVAC
ROPS cab, sound suppressed
Seat, air suspension, cloth
Seat belt, retractable 76 mm (3 in)
Step, driver access (left and right sides)
Storage area for cooler/lunchbox
Sun shade
Throttle control, electronic
Windows, laminated glass:
Windows, side and rear (3)
Wiper/washer, rear
Wrist rests, adjustable

Base Power (all gears) – Net 533 hp
Engine Model Cat® C18 ACERT™
Displacement 1104.5 in3
Bore 5.7 in
Stroke 7.2 in
Max torque 1762 ft-lb
Speed @ rated power 1800 RPM
Number of cylinders 6
Derating altitude 11000 ft
Std – Fan speed – max 1300 RPM
Std – Fan speed – min 60 RPM
Std – Ambient Capability 122 ° F

Weights
Gross Vehicle Weight – base 137694 lb
Gross Vehicle Weight – base, front axle 41584 lb
Gross Vehicle Weight – base, rear axle 96110 lb
Gross Vehicle Weight – max 145808 lb
Gross Vehicle Weight – max, front axle 43887 lb
Gross Vehicle Weight – max, rear axle 101921 lb

Contact;
Caterpillar Corporate Headquarters
100 North East Adams Street
Peoria, Illinois USA 61629
1 (309) 675-1000

Sponsored links