Sponsored links

 

Atlas Copco Rocket Boomer L2C

Jumbo Drills Comments Off

Atlas Copco Rocket Boomer L2C photo jumbo drillsHydraulic tunnelling rig with computerbased drilling system for high accuracy and productivity.
For cross sections up to 104 m2.
• Rig Control System (RCS) with interactive operator control panel with full-colour display of the computerbased drilling system. Autocollaring and anti-jamming protection
• COP 1838 rock drill with modern double refl ex dampening for high speed drilling and excellent drill steel economy
• Integrated diagnostic system can immediately identify faulty electronic components
• Advanced Boom Control ABC – assists the operator to achieve accurate drill hole location and improve the quality of the drilling by optimising the drilling pattern and reducing costly overbreak
• PC-card for transfer of data and for service engineers to store preferred drill settings
• Modular design of electronic and mechanical components
• Ergonomic cabin as optional, reduces noise level below 80 dB(A)
• Heavy-duty aluminium hydraulic feeds with double bottom for high torsional resistance
• BUT 35 heavy-duty booms for direct, fast and accurate positioning between holes. New powerful feed rotation unit and increased coverage. Improved linkage in main boom joints and new axial bearings in all boom joints • Sturdy, articulated carrier with four wheel drive for easy manoeuvring in narrow tunnels and drifts, powered by low emission, water-cooled diesel engine
• Basic rig includes telescopic FOPS-approved protective roof, adjustable operator’s control panel, fi xed seat, hydraulic driven compressor and water booster pump, cable reel, and work lights.

Rocket Boomer L2 C
Rock drill 2 x COP 1838ME
Feed 2 x BMH 6800-series
Boom 2 x BUT 35G
Drilling system RCS
Length 14170 mm
Width 2500 mm
Height with fi xed cabin 2900 mm
Turning radius 7360/4000 mm
Weight 23600 kg

Contact;
Atlas Copco Compressors
Swallowdale Lane, Hemel Hempstead,
Hertfordshire HP2 7EA
Tel0845 601 0001
Fax0207 0678847
gba.info@uk.atlascopco.comgba.info@uk.atlascopco.com

Fletcher J-352-LS Dual Boom Jumbo Drill

Jumbo Drills Comments Off

Fletcher J 352 LS Dual Boom Jumbo Drill  photo jumbo drills- Two boom jumbo is designed specifically for limestone mines and efficient drilling of headings as large as 60 ft. wide and 35 ft. high in one set up.
- Self contained, diesel hydraulic jumbo drill, provides the flexibility required to handle face, bench and roof bolt drilling requirements. J-352-LS carries all fuel and pelletizing water necessary to operate a full 10 hour shift without service.
- Four ram type stabilizers (two each front and rear) lift the complete machine 1 ft. off ground. Front stabilizers extend out to a 15 ft. wide stance for the improved stability required for full width hole locations.
- Tram drive is provided by an engine driven closed loop hydrostatic system driving through a two-speed drop box and drive shafts to both axles. A single joystick controls tram speed, direction and steering.
- The operator cab is ergonomically designed to provide unparalleled control, comfort and visibility. Cab includes a standard air conditioner/heater and is designed to achieve an 80 dba noise level. An optional cab lift system is available to lift the cab 18” for further visibility improvements.
- All operator controls for drilling and tramming are either pilot operated of 24vdc solenoid controlled, minimizing the noise and heat generated in the cab. All controls are conveniently located for comfortable operation from the standard “captains” style seat.
- All hydraulic, infinitely variable, rock responsive drill hydraulic system allows the machine to be matched to your drilling requirements. All drill system valves are leak free replaceable cartridges in manifolds and are in readily accessible cabinets.
- Flushing air is provided by an onboard direct drive screw air compressor with 150 psi output for better hole cleaning and more efficient drilling. A 250 gallon water tank carries the water required for pelletizing.
- Engine compartment covers are hinged and are easily opened for improved maintenance access. An optional enclosed engine compartment with hinged doors reduces noise levels.
- Engine radiator and hydraulic/air compressor coolers are remote mounted at the back of the machine and swing open for complete access for cleaning.
- Complete machine design and component location to maximize serviceability.

Contact;
J. H. Fletcher & Co.
402 High St. P.O. Box 2187
Huntington, WV 25702-2187
jhf@jhfletcher.com
304-525-7811

MTI Hydraulic Jumbo Drills

Jumbo Drills Comments Off

MTI Hydraulic Jumbo Drills photo jumbo drillsMining Technologies International Inc. (MTI) delivers a full line of development and production drilling equipment for the Mining, Tunneling and Construction Industries. Combined with MTI Montabert HC Series Drifters and Intelsense II drilling controls,
the MTI Vein Runner II, Drift Runner, Ramp Runner, and Tunnel Runner continue to lead the industry in reliability and performance. With Intelsense II drilling controls, every boom movement is smooth and precise, and every hole is accurate. Featuring MTI’s optional ROPS/FOPS certified environmentally controlled cabs; the operator is comfortable, productive and secure from all forms of hazards. EPA and MSHA certified engines are available on all MTI drills, because our commitment to a cleaner, safer environment is not just an afterthought.

Mining Technologies International offers Montabert HC50, HC109 and HC110 drifters on all MTI Hydraulic drill Jumbos & the HC20 for construction drills. Combined with Intelsense II drilling controls, MTI Drills have the highest availability and the fastest drilling rates in the industry.

The workhorse of any drill rig is the drifter! And the MTI Montabert HC series have given our customers the lowest cost per meter. Now MTI has embarked on a conversion program, and in the last few years retrofitted many of our customers existing units.

Contact;
MTI
Toll-free: 888.682.0623
E-mail: info@mti.ca

Bucyrus jumbo drill

Jumbo Drills Comments Off

Bucyrus jumbo drill photo jumbo drillsBucyrus jumbo drills combine proven, rugged design, easy operation and reliable drilling components. The result is faster cycle times, increased production and reduced per-ton costs. Each model includes electric or diesel power options. One and two boom models are offered to meet the demands of varied applications. The range of Bucyrus jumbo drills also includes shaft jumbos for shaft sinking operations and special jumbos for the use in tunnel excavations.

Key Features
The smaller carrier, the boom extensions and parallelism, allows for nearly 10% more face coverage
Proven durable and higly maneuverable. The articulated design and compact size makes them ideal for maneuvering and set up in tight spaces
Components location is designed for quick access and ample space
Variable displacement, compensated pumps reduses energy loss

Rock Drill
Hydraulic drifter provides high performance drilling with low operating cost
Drill has the fewest internal parts for less wear and easy maintenance
Field Serviceable drills eliminating lenghty and costly repairs and maximizing uptime

Boom
Designed for rollover 270/360 degrees permitting the operator more flexibility and coverage

Feed
Replaceable stainless steel wear strips to protect from wear
Innovative retainer clips provide simple & quick installation of replacements
Simplifies design reduced schedule pm times by 75%
Combination of aluminum cradle and steel mounts create a light and durable assembly
Uniques foot adapter system prevents wear to the bottom of the feed rail

Contact;
Bucyrus International, Inc.
6744 S. Howell Ave.
Oak Creek, WI, USA 53154
414.768.4000

Model J-251-LS Single Boom Jumbo Drill Carrier

Jumbo Drills Comments Off

Model J 251 LS Single Boom Jumbo Drill Carrier photo jumbo drills- Single boom jumbo is designed specifically for limestone mines and efficient drilling of headings as large as 50 ft. wide and 35 ft. high in one set up. Self contained, diesel hydraulic jumbo drill, provides the flexibility required to handle face, bench and roof bolt drilling requirements. J-251-LS carries all fuel and pelletizing water necessary to operate a full 10 hour shift without service.

- Four ram type stabilizers (two each front and rear) lift the complete machine 1 ft. off ground. Optional stabilizers lift machine 3.5 ft. Front stabilizers extend out to a 14 ft. wide stance for the improved stability required for full width hole locations.

- Tram drive is provided by an engine driven closed loop hydrostatic system driving through a two-speed drop box and drive shafts to both axles. A single joystick controls tram speed, direction and steering.

- Optional exclusive “articulated” operator cab tilts and swings providing unparalleled comfort and visibility for hard to see rib and roof holes. Cab includes a standard air conditioner/heater with filtered pressurizer and designed to achieve an 80 dba noise level.

- All operator controls for drilling and tramming are either pilot operated of 24vdc solenoid controlled, minimizing the noise and heat generated in the cab. All controls are conveniently located for comfortable operation from the standard “captains” style seat.

- All hydraulic, infinitely variable, rock responsive drill hydraulic system allows the machine to be matched to your drilling requirements. All drill system valves are leak free replaceable cartridges in manifolds and are in readily accessible cabinets.

- Flushing air is provided by an onboard hydraulic driven screw air compressor with high pressure output for better hole cleaning and more efficient drilling. A horizontal 200 gallon water tank carries the water required for pelletizing.

- Engine compartment covers are hinged and are easily opened for improved maintenance access. An optional enclosed engine compartment with hinged doors reduces noise levels.

- Engine radiator and hydraulic/air compressor coolers are remote mounted at the back of the machine and swing open for complete access for cleaning.

- Complete machine design and component location to maximize serviceability.

Contact;
J. H. Fletcher & Co.
402 High St. P.O. Box 2187
Huntington, WV 25702-2187
jhf@jhfletcher.com
304-525-7811

DOVE™ Vibrating Screen

Vibrating Screens Comments Off

DOVE™ Vibrating Screen photo vibrating screens equipment for underground mines open cast mines and metal ore mines mining and geologyDOVE™ Vibrating Screens are characterizes by their extremely robust, rugged and practical construction. The screen plates are supplied with variety of multiple grizzlies, pressure welded, with fine precision, designed to prevent clogging and for highest performance long and trouble free life.

DOVE™ Screeners are configured either with two or three Screen deck, with screen aperture size of 3 MM and up. The aperture sizes of each deck are configured in accordance to each application. The compact design allows light weight, simple structure, ease of maintenance and operation.

DOVE™ Screeners are configured by powerful, heavy duty vibrating mechanism, allowing large outputs. Screeners are supplied either in stationary or mobile configurations.

DOVE™ Vibrating Screens are produced in 24 models, Configured for either Dry-Screening or Wet-Screens Configuration. The Wet-Screens are equipped with high pressure jet sprays.

DOVE™ Vibrating Screeners
available with a complete stand structure, catwalk,handrails and access steps.
Low maintenance, minimum downtime.
Minimum operator interference.
High production & performance.
Heavy Duty construction.
Available in Mobile or stationary configurations.
Wet or Dry Screeners machines.
24 models to choose.
Available in horizontal or included configuration.

Contact;
DOVE GROUP OF COMPANIES
Level 7 & Level 8, S-7-G, S-8-G
Menara Northam
55 Jalan Sultan Ahmad Shah
10050 Penang, Malaysia
Tel: (+604) 210-2828
Fax: (+604) 210-2822

R155 High Energy Screener

Vibrating Screens Comments Off

R155 High Energy Screener photo vibrating screens equipment for underground mines open cast mines and metal ore mines mining and geologyThe R155 High Energy Screener is a tough, robust screening tool, designed to cope with the heaviest of applications. With the ability to handle some of the worst, untreated construction and demolition waste, the R155 can minimise material pre-handling, and provide clean end products.

The R155 has proved to be extremely effective across a wide range of applications. With a 155sq feet of screening area, the largest in its class, the R155 has impressed in operations including primary crusher circuits, site reclaimation, construction and demolition waste, heavy rock, sticky clay and fines, and boulder clay.

The ability of the R155 to handle larger material comes from its open feed design, along with the largest hopper, thickest feed belt and oversize conveyor belts in the industry, and full length impact bars. The High Energy Screenbox then give the ability to screen wet sticky material, ensuring the R155 performs in the most difficult of applications.

Specifications
Powerunit: 127 HP
Screenbox – top deck: 4.880m x 1.525m (16′ x 5′)
Screenbox – bottom deck: 4.575m x 1.525m (15’ x 5’)
Length – working: 15.21m (49′ – 10″)
Width – working: 13.45m (44′-1″)
Length – transport: 15.30m (50′-2″)
Width – transport: 2.90m (9′ – 6″)
Height – transport: 3.40m (11′ – 2″)
Weight – track: 34,000kg (74,960 lbs) est

Contact;
McCloskey International Limited
#1 McCloskey Rd.
RR #7
Peterborough, Ontario
CANADA K9J 6X8
Toll Free: 1-877-876-6635
(1-877-TROMMEL)
Tel: 1-705-295-4925
Fax: 1-705-295-4777
Email: mccloskey@mccloskeyinternational.com

Sloped vibratory screener

Vibrating Screens Comments Off

Sloped vibratory screener photo vibrating screens equipment for underground mines open cast mines and metal ore mines mining and geologySloped vibratory screeners with single motor vibrator VS
For wet and dry – screening and scalping
Quiet operating, 75 decibels
1200 RPM vibrator drive standard
1800 RPM and 900 RPM motors optional low cost design
Coil spring or air mount isolation
Floor mounted or overhead suspended designs
Adjustable amplitude

Model VS-2448-1 shown with 1 HP, 1200 RPM, motor vibrator, grizzly bar deck and coil isolation springs. Designed to remove foreign objects from reclaimed oily cast iron chips.

Model VS Low Cost Sloped Gravity Screener is used primarily for rough scalping and sizing applications. Units are installed at a 20 to 30 degree downslope. One top mounted motor is employed. Isolation mounts are either coil springs or air mounts. Support bases are optional. Five (5) sizes of units are offered in 1, 2 and 3 deck designs. Adjustable angle brackets allow adjustment to any slope required.

The most unique feature about the model “VS” screener is the flexibility offered in motor vibrator drive selection. For fine screening applications requiring a higher frequency action, an 1800 RPM drive can be selected. For coarser, larger screen openings, a 1200 or 900 RPM drive can be applied, offering greater amplitude.

Sharp omni-directional forces are imparted to the screen deck dislodging near size particles. Motors can be arranged for “with-flow” or “counter-flow” rotation. With-flow rotation offers greater capacity while counter-flow rotation provides longer product retention, better product stratification, and higher fines removal efficiency.

Amplitude of screener is easily adjusted on BEST INC.’s heavy duty, self-contained motor vibrator. Optional features include: bottom fines pan, dust covers, special inlets and outlets, and dust boots.

Contact;
Metso Automation GmbH
Raiffeisenallee 5
D-82041 Oberhaching
GERMANY
Tel +49 89 613808 0
Fax +49 89 613808 155

Vibroset Vibrating Screener

Vibrating Screens Comments Off

Vibroset Vibrating Screener photo vibrating screens equipment for underground mines open cast mines and metal ore mines mining and geologyThe Vibroset Vibrating Screener is a light-duty screener. It is recommended for applications where materials are being processed in volumes up to 15 tons per hour. In spite of its light-duty classification, the Vibroset still exceeds many competitive screen designs in terms of build quality and strength. If your circular screen is not performing as desired, the Vibroset is a great alternative.

Vibroset Vibrating Screeners have helped processors for over 60 years!

Here’s how the Vibroset works: This vibrating screen is a two bearing screen with a centroidally mounted drive. It features a positive eccentric action for smoother operation, meaning less vibration transmission. The Vibroset also utilizes sealed-for-life bearings. With the many standard alternatives and options available, this machine can be custom fit to the screening application as well as your installation area. Vibroset construction is also available for light-duty applications requiring a linear screener.

Basic Features
Quality: Exceptional Build Quality and Materials for a Light Duty Screen.
Flexible: Four Quick-Set Amplitude Adjustments.
Smooth: Coil Spring or Lord Mount Isolation
Dependable: Sealed for Life Bearings.
Efficient: Conveying Motion Means Minimum Product Degradation
Versatile: Huge Degree of Options and Customization Available

More Options
Ball Decks
High Temp Kits
Deck Heaters
Deck Selectors
Cable Hang Kit
Accepts Many Media Types
Food Grade Construction
Polyurethane Decks
Wear Liners
Spray Bars
Oil Bath Drive
Aspiration
Stainless Construction
Custom Discharge, Intake, Structure, etc.

Contact SMICO
SMICO Manufacturing Company INC
500 N MacArthur Blvd
Oklahoma City, Oklahoma 73127
P: 405.946.1461
F: 405.946.1472

McCloskey Tripledecks (TD) Vibrating Screen

Vibrating Screens Comments Off

McCloskey Tripledecks (TD) Vibrating Screen photo vibrating screens equipment for underground mines open cast mines and metal ore mines mining and geologyThe McCloskey Tripledecks (TD) boast an array of features and benefits which elevate the models above all the competitors in its class. The S190 TD has the highest combined true screening area across three decks, whilst the S130 TD has comparable production capacity to its competitor’s larger models at a far more cost effective price.

This class leading screening area, along with it high energy screening action (combination of optimised screenbox weight, shaft speed, and screen amplitude dynamics) ensure that the McCloskey Tripledeck models are the superior choice in aggregate material screening.

The McCloskey Tripledeck models are uniquely produced with a cross conveyor, and a fully hydrualic fold fourth conveyor as standard. This reduces set up time, the need for lifting equipment, and prevents damage or bending when moving the machine, or when setting up with manual lifting gear.

With quality components throughout, the McCloskey Tripledecks offer a reliable solution to the demands of customers application needs.

Specifications
S190 Tripledeck Dimensions & Weight S130 Tripleck
Powerunit: 125 HP 100 HP
Screenbox- top deck: 6.1m x 1.524m (20′ x 5′) 4.270m x 1.524m (14′ x 5′)
Screenbox – middle deck: 6.1m x 1.524m (20′ x 5′) 4.270m x 1.52m (14′ x 5′)
Sceenbox – bottom deck: 5.490m x 1.524m (18′ x 5′) 3.660m x 1.524m (12′ x 5′)
Length – transport all models: 17.16m (56′ – 4″) 15.09m (49′ – 6″)
Width -Transprt all models: 3.0m (9′ – 10″) 3.0m (9′ – 10″)
Height – transport track: 3.45m (11′ – 4″) 3.45m (11′ – 4″)
Height – transport wheel: 3.73m (12′ – 3″) 3.73m (12′ – 3″)
Weight – track: 36,500kg (80,468 lbs) – est 29,000kg (63,933 lbs) – est
Weight – wheel: 33,000kg (72,752 lbs) 25,000kg (55,115 lbs) – est

Contact;
McCloskey International Ltd.
47 Moor Road
Coalisland, Co. Tyrone BT714QB
Northern Ireland
Tel: (+44) 28 8774 0926
Fax: (+44) 28 8774 7242
Email: salesuk@mccloskeyinternational.com

Sponsored links