Sponsored links

 

Tube Notcher TN-800

Pipe & Tube Notchers Comments Off

Tube Notcher TN 800 photo pipe tube notchersThe TN-800 tube notcher is the perfect notching machine for the fabricator who needs to cope or fish mouth the ends of tube at 90 degrees, or variable angles for applications such as hand railing, chassis and much more. This end mill notcher is the only one on the market that requires only one end mill to notch all the way up to 3″ OD. It employs a very unique design where the operator dials in the OD that they wish to notch to. So, if the operator needs to work with 1-1/4″ Schedule 40 for a hand railing application he or she would simply dial in 1.660″ and the tube notcher will change its eccentric path and produce a perfect notch. This patented feature saves the fabricator thousands of dollars every year in tooling costs. No other end mill notcher has this profitable feature.

The Baileigh TN-800 pipe notcher uses a sturdy ductile iron cast frame that weighs 610 lbs. A heavy frame reduces vibration allowing for faster notches and longer tooling life. Attention to detail in the design will benefit the serious fabricator for decades of use. The rugged pipe notcher vise uses a V-Block design that allows the part to stay on center with the cutter, as well as it provides a better hold for round profiles. There is an offset adjustment when this type of cope is required. This tube notching vise has a quick release taper lock system that allows it to be adjusted to a new angle in seconds, saving time and money.

The vise has a rugged X and Y adjustment and a large hand wheel that actuates the tube notchers eccentric cutting motion. The actuating hand wheel is clutched so the operator can only turn it in one direction. This eliminates the possibility of climb milling. This pipe coper design is perfect for fish mouthing the ends of tubing and pipe of varying wall thickness and outside diameters.

The TN-800 tube notcher requires 110Volts of single phase power at 60 Hertz making it the perfect mobile notching machine. The pipe notcher comes mounted on a heavy duty cart that has large wheels and casters that makes it perfect for moving around any job site. Of all other tube notchers on the market no other boosts of such great design features and quality.

Changing over the TN-800 pipe notcher from one diameter to another with varying angles can be accomplished quickly and efficiently, saving you time and money. No other notching machine on the market compares. For more information on this pipe coper, call a Baileigh representative now. We typically keep this coping machine in stock for quick deliveries.

Specifications
Notch Capacity (OD).5”(min/optional) – 3”(max)
Angle Adjustment0 – 60 deg
Mill Size1” std (.5” optional)
Speed177 rpm
Motor1 hp
Power Requirement110 volt
Shipping Dimensions (L/W/H)60” / 44” / 48”
Weight610 lbs

Contact;
Baileigh Industrial, Inc.
P.O. Box 531
1625 Dufek Drive
Manitowoc, WI 54221-0531
920-684-4990
Email: sales@bii1.com
www.bii1.com

JD2 TN-100 Tube Notcher

Pipe & Tube Notchers Comments Off

JD2 TN 100 Tube Notcher photo pipe tube notchersThe notcher for the builder who knows quality tools and demands the best. This unit from JD2 is the most popular hole saw notcher on the market. Known for its well machined billet aluminum construction, micro-adjustable and self centering V-style vice, and stainless steel shaft supported by needle bearings, it is sure to get your notching projects done year after year.

Features
Large capacity and low cost – The TN-100 notches 3/4″ through 2″ O.D. tubing at angles up to 50° in under 20 seconds. It uses commonly available bimetal hole saws costing approximately $10. A single bimetal hole saw will typically notch 3 to 5 complete cars.
Easy to use – The TN-100 may be mounted in a drill press or simply clamped in a vise and used with a 1/2″ hand drill. The TN-100 can be laid horizontal when notching 45° angles, so the floor will not interfere with the tubing being notched.
Heavy duty frame – Entirely CNC machined, the frame is made from 1/2″ thick 6061-T6 aluminum and its face has been milled flat. The degree increments are then machined directly into the frame so they can’t wear off. An all position swivel base ensures easy setup.
Rigid bearing block – This is the most critical part of a hole saw style notcher. The TN-100′s bearing block uses twin needle bearings and separate grease seals for maximum rigidity and reliability. A 3/4″ ground and polished stainless steel shaft protects against the possibility of rust contaminating the precision bearings.
Strong, accurate tube cradle – As can be seen in the picture, the entire cradle and clamp assembly have been CNC machinined out of a solid steel block so the tube will be notched exactly in the middle. This eliminates the problems of tube walk in notchers that use a U-strap.

Contact;
KMS Tools and Equipment
Multiple Locations in Canada
Phone: 604-522-5599 or 1-800-567-8979 Toll Free
Fax: 604-522-0638 or 1-800-567-3799 Toll Free
www.kmstools.com

JMR High Capacity Tube & Pipe Notcher

Pipe & Tube Notchers Comments Off

JMR High Capacity Tube & Pipe Notcher photo pipe tube notchersThe JMR TN-1000 Tubing and Pipe Notcher is the highest quality and one of the most versatile hole saw notchers on the market. It is manufactured from bar stock, not plate, to increase strength and has a 1.125″ induction hardened shaft supported by Timken™ bearings. The custom designed shaft seals prevent bearing and shaft damage and the shaft accepts replaceable hole saw mounting threads.

Angle changes can be made easy due to a Timken™ thrust bearing at the pivot point to increase clamping force while reducing wrench pressure. Use it for prototyping or production work.

Capable of notching in a 210° arc
Easily handles Offset copes with included shim kit
2.5″ tube, 2″ pipe capacity
Double v-clamp vise allows square to be held flat or corner to corner
Will hold thin wall tube without distortion
May be clamped on tube/pipe to bore holes
Multiple mounting positions
Engraved degrees and stainless steel pointer ensures accuracy
Aluminum bronze acme threaded bushing on clamp

Contact;
JMR MANUFACTURING
805-239-5972
Mailing Address:
JMR MFG
P.O. Box 606
Creston, CA 93432

Baileigh Industrial TN-250 Tube and Pipe Notcher

Pipe & Tube Notchers Comments Off

Baileigh Industrial TN 250 Tube and Pipe Notcher photo pipe tube notchersThe TN-250 is one of the most versatile hole saw notchers on the market today. The unique radial vise clamping system allows for clamping tubing from 1″ to 2.5″ OD in any location, including the center of a bend. Hole saws are supported on a massive 1-1/4″ OD shaft, which also includes a replaceable hex insert for attaching to a standard 1/2″ drive drill. Offset copes of up to 1″ can be accomplished by raising or lowering the cutter assembly. This notcher also allows for the use of 3″ deep hole saws for making longer cuts in a single pass.

TN-250 Features:
Capacity of 1″ to 2.5 ” OD
230º of angle adjustment
All CNC machined
Radial vise clamping system allows for clamping in the center of a bend
Can offset notch up to 1″ vertically
1-1/4″ Ground & Polished Stainless Steel shaft
Sealed needle bearing shaft support
Easy mounting: Bolt or clamp it to a table or simply clamp it in a vise
Can use 3″ deep hole saws
Requires an ordinary 1/2″ hand drill

Contact;
Baileigh Industrial, Inc.
P.O. Box 531
1625 Dufek Drive
Manitowoc, WI 54221-0531
920-684-4990
Email: sales@bii1.com
www.bii1.com

EN100 Pipe & Tube Notcher

Pipe & Tube Notchers Comments Off

EN100 Pipe & Tube Notcher photo pipe tube notchersFeatures
Notch angles to 60° in pipe or tube up to 3″
Replaces outdated notching methods of using hole saws, end mills, grinding wheels and flame cutting.
Patented simultaneous infeed and crossfeed action extends belt life and reduces heat
Uses premium abrasive belts for a wide range of materials including; carbon steel, stainless steel, Inconnel, chrome-moly, aluminum and titanium
Ideal for hand railing, chassis and roll cages, fences and gates, furniture frames, marine rails and arches, tubing and plumbing for restaurant and dairy
Graduated vise 0-60° with vertical adjustment for offset angles
Patented Quick Change roller system
Converts to abrasive belt grinder with optional accessory
Top mounted deburring surface
Over 25 notcher rollers available
Tool free belt changeover
One (1) year limited warranty

Part# EN100
3″ Capacity
Notch angles to 60°
Produces gap-free joints ready
for welding • Simultaneous table infeed
and crossfeed action • Top mounted
deburring surface • Patented quick
change roller system
220V or 440V 3ph.

Contact CML USA, Ercolina® Inc.
3100 Research Pkwy.
Davenport, IA 52806
Ph. 563-391-7700
Fax 563-391-7710
info@ercolina-usa.com

SR-5016 powered slip roll

Slip Rolls Comments Off

SR 5016 powered slip roll photo slip rollsThe SR-5016 powered slip roll has a forming width of 50″ with a capacity of 16 gauge mild steel. This is a three roll machine with two driven rolls that are made of polished carbon steel offering years of service. This is the perfect sheet metal tool to have in any HVAC shop or general fab shop when sheet metal forming is required. The drive transmission for the SR-5016 is driven by a powerful motor that requires 220V, Single Phase, 60 Hertz that is suitable for almost any shops electrical service. The frame is composed of two heavy solid steel frames that are electro-welded to a heavy base that allows no deflection when bending across the entire useful width at full capacity (16GA mild steel sheet metal). This rigid construction will provide precision roll bending for decades of production. This sheet metal roller comes standard with three wire grooves.

For rolling sheet metal simply place the unbent piece into the bender and bring the back roll up to the desired position, then start your bend. This piece of sheet metal equipment is easy to adjust and operate making this bender a pleasure to work with, and this increases rolling productivity. Simplicity and rigidity define the SR-5016 roll bender.

Baileigh’s SR-5016 roll bender is a great piece of fabrication equipment to add to any fabrication shop where 16GA sheet metal or lighter needs to be rolled down to a minimum diameter of 4.5″ or larger. It’s perfect for heating and ventilation stacks. A Baileigh sheet metal roller is built to the highest quality standards on the market. Baileigh Industrial sells an array of fabrication machinery and equipment throughout North America and Europe. If you’re looking for a sheet metal roller for heavier gauges, please visit our plate roll section on this web site.

Specifications
Forming Width 50″
Capacity Mild Steel 16 ga
Upper Roll Diameter 3″
Minimum Forming Diameter 4.5″
Wire Grooves Yes
Roll Speed 16 rpm
Stand Yes
Motor 1hp
Power Requirement 220 volt/ single phase
Shipping Dimensions(L/W/H) 67” / 26” / 46”
Shipping Weight 770 lbs

Contact;
Baileigh Industrial, Inc.
P.O. Box 531
1625 Dufek Drive
Manitowoc, WI 54221-0531
920-684-4990
Email: sales@bii1.com
www.bii1.com

JET 50″ Electrical Power Slip Roll

Slip Rolls Comments Off

JET 50 Electrical Power Slip Roll photo slip rollsPerfect tool for sheet metal forming in HVAC and FAB-shops
Roll drive is controlled by foot pedal for immediate forward and reverse action
Rolls are made of hardened polished high-carbon steel.
Forming roll has attached position scale for equal pressure adjustment
Heavy duty cast iron frame and base insure precise sheet metal rolling.
Easy to setup and operate
Convenient foot-control assembly with emergency-button
Weight and rigidity; scale and precision; strength and simplicity define exceptional comfort and ease of operation.
All electrical and rotating parts are designed for safety and ease of use

Overall Dimensions 67 x 42 x 20
Height 42 inch
Width 20 inch
Length 67 inch
Net Weight 810 pound
Gross Weight 910 pound
Flex Specs Description 1 Roll Speed
Flex Specs Value 1 22 RPM
Flex Specs Description 2 Motor Power
Flex Specs Value 2 1HP, 230/460V, 3Ph, 60Hz
Flex Specs Description 3 Machine prewired
Flex Specs Value 3 230V, 3Ph, 60Hz
Min. Forming Radius 2 in.
Wire Grooves 1/4, 5/16, 3/8 in.
Number and Diameter of Rolls 3 rolls x 3 in. diameter
Mild Steel Capacity (Gauge/in.) 16
Max. Forming Length (in.) 50

Contact;
North America Manufacturing Headquarters
427 New Sanford Rd
La Vergne, TN 37086-4184
Phone: 615-793-8900
Fax: 615-793-8905
Email: customerservice.us@waltermeier.com

Northern Industrial Slip Roll

Slip Rolls Comments Off

Northern Industrial Slip Roll photo slip rollsHand-powered roll for custom sheet metal shop or light manufacturing. Parallel rolls produce steel tubing, pipe, galvanized steel ducts and more. Reverse rolling creates a tube with the same or slightly larger diameter than the 2in. rolls.

Key Specs
Max. Rolling Width (in.)
36
Min. Rolling Radius (in.)
1
Manufacturer Warranty
12 months parts / 12 months labor
Ship Weight
315.0 lbs

Contact;
Northern Tool + Equipment
2800 Southcross Drive West
Burnsville, Minnesota 55306
Driving Directions
Phone: 952-894-9510
Fax: 952-894-1020

Manual Slip Roll – SR-5016M

Slip Rolls Comments Off

Manual Slip Roll   SR 5016M photo slip rollsThe SR-5016M slip roll has a forming width of 50″ with a capacity of 16 gauge mild steel. This is a three roll machine with two driven rolls that are made of polished carbon steel offering years of reliable service. This is the perfect sheet metal tool to have in any HVAC shop or general fabrication shop when sheet metal forming is required. The frame is composed of two heavy solid steel frames that are electro-welded to a heavy base that allows for no deflection when bending across the entire useful width at full capacity (16 gauge mild steel sheet metal). This highly rigid construction will provide precision roll bending for many decades of production. This sheet metal roller comes standard with three wire or rod grooves.

For rolling sheet metal simply place the unbent piece into the bender and bring the back roll up to the desired position, then start your bend. This sheet metal bender is easy to adjust and operate, making it simple to work with. Rigidity and simplicity define the SR-5016M roll bender.

Specifications
Forming Width 50″
Capacity Mild Steel 16 ga
Upper Roll Diameter 3″
Minimum Forming Diameter 4.5″
Wire Grooves Yes
Gear Ratio 3:1
StandOptional
Power Requirement Manual
Shipping Dimensions(L/W/H) 65” / 16” / 20”
Shipping Weight 528 lbs

Contact;
Baileigh Industrial, Inc.
P.O. Box 531
1625 Dufek Drive
Manitowoc, WI 54221-0531
920-684-4990
Email: sales@bii1.com
www.bii1.com

Woodward-Fab Slip Roll

Slip Rolls Comments Off

Woodward Fab Slip Roll photo slip rollsThe Woodward-Fab slip roll is an easy-to-operate unit that handles mild steel up to 20 gauge.

Features + Benefit
Solid 2in. dia. hardened steel rolls
Includes quick release top roll
Heavy cast iron frame

Max. Rolling Width (in.)
40
Dimensions L x W x H (in.)
50 x 16 x 11

Contact;
Woodward Fab
PO Box 425
1498 Old US 23
Hartland Mi. 48353
PH – 1-800-391-5419 Toll Free
1-810-632-5419
1-810-632-6640 Fax

Sponsored links