Model LaserPoint 24
Controller 16 bit CPU
Control panel Over-head, 2×8 L C D, 13-button touch thin-film keyboard
Driver High stepping motor, micro-step driver
Maximum paper feed width 730mm (28.7″)
Max cutting width 625mm (24.6″)
Max cutting speed 400mm/s
Max cutting thickness 1mm
Mechanism precision .1mm
Repeatable precision <+- 0.1mm
Type of plot pen All types Diameter 11.4mm plotterpen
Protocol DM-PL HP/GL automatic identification
Power supply 110V/220V AC
Power consumption <100VA
Warranty 1 Year (Cover parts)
Oakridge Building Center
17945 NE 65th St, Suite 200
Redmond, WA 98052
When it comes to cut quality, nothing compares to genuine tangential cutting. With advanced computer-controlled blade rotation and up to 600 grams of cutting force, Summa S Class T Series cutters simply cut better and deeper than any other cutter in their class. Graphics weed easier. Thick materials cut like butter. Intricate designs are cut flawlessly. Thanks to its genuine tangential cutting head, Summa S Class T Series has the cutting precision of a flatbed while giving you the ease and high-speed of a roll-fed cutter.
By combining the world’s most advanced cutting technology with legendary Summa tracking, the Summa S Class T Series family of cutters are truly in a league of their own. Yet as advanced as T Series cutters are, they are also remarkably easy-to-use. All Summa S Class cutters are adorned with a touch-sensitive LCD control panel that makes navigating context-sensitive menus a breeze.
Like the Summa S Class D Series, T Series cutters offer the same precision, durability, and features that are the hallmark of every Summa S Class cutter. When paired with a computer-controlled blade rotation, Summa S Class T Series sets the standard by which all other cutters are measured.
Models 30-INCH (76 CM) TANGENTIAL, 48-INCH (122 CM) TANGENTIAL, 54-INCH (137 CM) TANGENTIAL, 64-INCH (163 CM) TANGENTIAL
Cut Type TRUE TANGENTIAL WITH DRAG-KNIFE CUTTING MODE CAPABILITY
Compatibility BLADE, PEN, POUNCE TOOL
Cut Widths S75 T – 29.2 IN. (74.2 CM), S120 T – 47.2 IN. (120 CM), S140 T – 53.1 IN. (135 CM), S160 T – 62.2 IN. (158 CM), EXTENDED MODE: WIDTH OF THE MATERIAL
Cut Speed UP TO 56 IN./SEC.
(1414 MM/SEC.) MAXIMUM
Cut Force 0-600 GRAMS, IN 5 GRAM STEPS
Connectivity USB (SERIAL AVAILABLE)
Standard Accessories WINPLOT OR MACSIGN CUT SOFTWARE, CUTTER CONTROL PARAMETER SOFTWARE, 2 STANDARD BLADES, HOLDER AND NOSEPIECE, 1 THICK MATERIAL BLADE AND NOSEPIECE, BALLPOINT PEN, POUNCE TOOL AND HOLDERS
10001 Lake City Way NE
Seattle WA 98125
Ideal for small offices, schools and hobbyists, Roland STIKA vinyl cutters produce colorful POP displays, labels, and iron-ons. Creating custom vinyl graphics has never been faster or more affordable. Bundled CutStudio software lets users tile up to 16 designs and contour cut printed images. The Stika 12″ handles vinyl, paint mask, reflective vinyls, twill, heat transfer, and etching material.
Specifications for Stika 12″ Vinyl Cutter
Cutting Area 9-13/16 (X) x 39-5/16″ (Y)
Cutting Speed 7/16 to 1-9/16ips
Media Width W 11 to 12″ x L 43-1/4″
Size 17-3/8(W) x 8-1/8(D) x 4-1/2″ (H)
Power Supply AC 100V +/- 10%, 50/60Hz 1.7A
Comes with AC adapter, power cord, USB cable, replaceable blade protector, blade, blade holder, pin, material for test cuts, application tape for test cuts, Roland Software Package CD-ROM SV-15/12/8 user’s manual
Custom Engraving Co.
405 N. Wickham Rd.
Melbourne, FL. 32935
Call us at (321)622-8946
Toll Free at 888-605-2572
Fax – (321) 622-8952
On the job, the CE5000 series offers real cost/performance advantages over other brands of cutting plotters. With faster cutting speeds and higher cutting force, you’ll have the flexibility to handle a wider range of material. The USB 2.0 high speed data interface or RS232C Serial Port ensures a reliable connection to the computer, either on a Mac or Windows PC. The CE5000 comes with ROBO Master Pro design software (Windows 2000/XP) and the completely new Cutting Master 2 Production Manager and Plug-in for the latest versions of CorelDRAW including X3, and Illustrator 8 thru CS2 on Windows 2000/XP, and ver. 10 through CS2 on Mac OS X on PowerPC and Intel Core processors.
The CE5000-60 (24″) delivers a maximum cutting force of 300 grams and a maximum speed of 24 inches per second (in all directions.) The CE5000-120 (48″) features a cutting force up to 450 grams, and a maximum cutting speed of 40 inches per second (45 degree angle.)
24 ips speed – all directions
300 grams max cutting force
Max cutting width: 23.7″
Digital servo driven, smooth and quiet operation
Includes a sturdy floor stand and roll media bracket
Advanced ARMS for precise contour cutting
Sign Warehouse, Inc
980 Contract St, Ste. 110
Lexington, KY 40505
Ext. 3002 & 3004
In addition to Roland’s legendary reliability, the GX Pro offers enhanced versatility and ease of use. Vehicle graphics, window tint, signage, stencils and even pinstriping come out looking crisp and clean. Its ability to contour cut pre-printed graphics lets you create professional ‘vehicle wraps and even heat transfers for garments. It cuts vinyl, paint mask, reflective vinyls, twill, heat transfer and sandblast material.
Specifications for GX-Pro 300 Vinyl Cutter
Cutting Area 29 x 984-1/8″
Cutting Speed 33 inches per second
Media Width 2 to 36″
Size 45-1/16(W) x 28-5/8(D) x 43-13/16″(H)
Power Supply AC 100V to 240V +/- 10% 50/60Hz 1.2A
Comes with Power cord, blade, blade holder, alignment tool, cable clamp, replacement blade for separating knife, Roland Software Package CD-ROM, startup guide, user manual
Software (Bundled) Roland CutStudio
Roland DGA Corporation
15363 Barranca Parkway
Irvine, California 92618
(949) 727-2100 or toll free at 800-542-2307
It adopts pulse laser and focuses the laser beam inside transparent materials such as glass or quartz to produce nanometer points of vaporous burst. Because the points can constitute splendid picture, pattern and words inside the material controlled by a computer, ordinary transparent material can be made into grade luxurious art wares.
Our series laser subsurface engraving machines are usually used in glass decoration industry, crystal gift industry, glass gift industry, and glass and Plexiglas signs industry. It can also be used in secondary process industry of all kinds of bottles and other transparent materials.
Laser Medium Diode-pumped solid-state laser
Cooling Air cooled
Laser Wavelength 532nm
Pulse Repetition Rate 2 kHz
Pulse Width 7ns
Pulse Energy 1.2mJ
Laser Beam Quality TEMoo, M2<1.5
Resolution 500 DPI
Engraving Field max. 190mm*160mm*100mm
Engraving speed 1500 dots/second
Input Electricity 220VAC/110VAC, 50Hz
Power Consumption 0.6kW
Sintec Optronics Pte Ltd
10 Bukit Batok Crescent #07-02 The Spire Singapore 658079
Tel: +65 63167112 Fax: +65 63167113
E-mail: sales@SintecOptronics.com or sales@SintecOptronics.com.sg
â€¢ Medium to large engraving & cutting
â€¢ Non-flat surfaces
â€¢ Signage, front panels & matrix applications
* Intelligent: iQ+
The IS900 combines Gravograph engraving and build quality with ground-breaking productivity. The machine optimises job transfer times, accelerates at up to 1000 mm/secÂ² and engraves at up to 100 mm/sec over an extended engraving area.
* Innovative: Terrain Follower
An amazing innovation as standard.
This exclusive technology ensures precise engraving on any shapes of items in the sign and giftware businesss â€“ no need to measure anything! The iQ+ Terrain Follower compensates for variations in engraving surface so that you donâ€™t need to.
The design of the machine allows to load plates to be engraved that are longer than the standard engraving area. At the rear of the machine, there is window, covering the 25 in. length, which gives the possibility to load long plates.
2200 Northmont Parkway
Duluth, GA 30096, USA
Toll Free Tel: 1-800-843-7637 – Tel: 770-623-0331
The sleek and uncluttered design of the U-MARQ Universal-350 computerized engraving machine combined with the mechanical stability, ensures that engraving on large or small cups, slavers and swords is as simple as a trophy plate. All this on the same system which seconds later can be engraving lettering only a fraction of a millimeter high on delicate jewelry. Linked to your laptop or PC, it is easy to set up and use in any environment, where fast and efficient engraving of single or multiple items is needed.
As well as gifts and personal items, the Universal-350 will engrave large tankards, large glass bowls, brass plaques, aluminum signage multiple badges, soap and much more! With its high quality and high speed spindle, which is almost noiseless, it is ideal for the workshop or retail environment. This makes the Universal-350 the ultimate versatile engraving machine.
Flat work size
9.5″ x 5.0″ (240mm x 132mm)
Cylindrical work size l
10.5″ (265mm) diameter
4.3″ (110mm) top of jaws, 11.0″ (280mm) top of beam
Maximum vice opening
Spindle motor speed
Power of spindle motor
100W, 24 Volt Brushless Hall Effect DC motor
Variable, electronically controlled micro stepping, up to 4.5″/sec (116mm)
Interface to PC/Laptop
Stainless steel spindle, lead screws (Teflon coated) and linear rails mounted on a steel and aluminium chassis.
Resins, plastics, wood, plaster, aluminum, brass, steel, gold, silver, copper sheet, etc..
24.0″ H x 16.5″ W x 33.0″ L (610mm x 420mm x 840mm), total weight 150 lbs. (68 kg)
USB cable, power cable,120Â°diamond drag, carbide cutter, brass knob, nylon nose cone, light touch knob, standard aluminum jig, set of four jig pins, 50-85mm cup cone, 100mm face plate, U-MARQ Universal-350 engraving software package and quick installation guide, scanning module and vector software for logo generation.
Minimum PC/Laptop requirements
2 GHz dual core PC running Windows XP (with service pack 2+) Windows Vista or Windows 7, 1 Gb RAM, 100 Mb free hard disk space, 2 free USB ports, 256 color SVGA display, CD-ROM drive and mouse.
8 Fj Clarke Cicle
Bethel, CT 06801
Mechanically speaking, the EGX-400/600 is belt driven, delivering not only speed, but also pen point accuracy.
The EGX-400 has a 12â€ x 16â€ x 1.57â€ work area and EGX-600 has a 16â€ x 24â€ x 1.57â€. Both models have
DAC-FFP technology – Feed Forward Processing with digital AC servo motors
to control the movement along the X, Y and Z-axes.
The 30,000 RPM DC brushless spindle motor on the EGX 400/600 is not only high precision, but also it reduces
vibration within the unit and produces quality engraving on a variety of materials.
EGX-400/600 is capable of engraving everything from small and simple jobs to large and complex jobs. In
addition to speed, power and precision, it also comes with a removable table to accommodate jobs that require
the use of a vise or jig. Compatible materials include but are not limited to acrylic, dual-coated micro-thin
plastics and light metals such as brass and aluminum. Use the EGX PRO series to create professional badges,
nameplates, key rings and luggage tags or even diamond scribe coated brass for trophy plates.
â€¢ Max. Operation Area
EGX-400 [x] 16â€ [y] 12â€ [z] 1.57â€
EGX-600 [x] 24â€ [y] 16â€ [z] 1.57â€
â€¢ DC Servo Spindle motor: DC brush less motor, max 72W
4 (IPS) Feed Rate: [XY] 1.97 inches/sec, [Z] 1.97 inches/sec
â€¢ DAC-FFP control
AC Servo motors that are powerful, high speed and precise.
â€¢ Removable Table for using a vise or jig
â€¢ Surfacing table available
â€¢ 30,000 rpm spindle
High speed, high quality engraving
â€¢ MMC memory card is compatible
No PC required after file is designed
â€¢ Surface Detector
â€¢ Sequence control I/O Connect several units for a production line
Product Management information 2/22/2002 3
Software and Drivers
Easy-to-use engraving software, Dr. Engrave, comes standard with each EGX PRO engraver. Dr. Engrave
allows you to use industry standard TrueType fonts. You can also create your own designs, import a Windows
bitmap file or Vector Art from Roland (DXF file). Dr. Engrave features an automatic layout function that
allows you to create large multiple-plate applications quickly and easily to produce large door-numbering
projects or corporate nametags. Software and Window drivers are compatible with Microsoft windowsÂ®
95/98/Me/NT4.0, 2000 and XP.
Multi-Functional, LCD Control Panel and Display
The simple LCD user display and control panel allows easy, quick setup and
a wide variety of functional controls.
Engraving Machines Plus Corp.
110 Pine Tree Drive
Indialantic, FL 32903
The U-MARQ Gem-RX5 is perfect for jewelry applications and engraves flat items, inside and outside of rings or bracelets, and 360 degrees around any small cylindrical item. It can cut out gold and copper sheet. The U-MARQ GEM-RX5 is the fastest and easiest to use gift and jewelry 4-axis mechanical engraver in the world!
Description for U-Marq Gem-RX5 Engraving Machine
The U-MARQ Gem-RX5 is the fastest and easiest to use gift and jewelry 4-axis mechanical engraver in the world! The first truly versatile, compact and affordable engraver to suite any budget. The GEM-RX5 comes with self-centering vise and jigs for holding a wide variety of merchandise such as jewelry, trophy plates, lighters, hand bag mirrors and much more. With the cylindrical axis you are able to engrave 360 degrees around a pen, mini flashlight, etc… The high-speed spindle motor enables you to burnish in coated metals as well as deep engraving into plastics and metals.
Specifications for U-Marq Gem-RX5 Engraving Machine
Size 13.4″ h x 10.8″ W x 9.4″ L
Table Area 6.0″ x 3.0″
Vise Area 5.7″
Cylindrical Area 2.75″ diameter
Tool Diameter 11/64â€ (4.36mm)
Spindle Motor 42W Brushless DC motor
Spindle Speed 14,000 RPM
Spindle Travel 65mm
Software (Bundled) UMarq Engraving software package, quick start guide
Custom Engraving Co.
405 N. Wickham Rd.
Melbourne, FL. 32935
Call us at (321)622-8946
Toll Free at 888-605-2572
Fax – (321) 622-8952