Sponsored links

 

CNTB-3A Zoom Stereo Microscope

Other Machines Comments Off

CNTB 3A Zoom Stereo Microscope photo other machines metallurgy laboratory equipmentCNTB-3A is widely used for electronic assembly, industrial quality control, dissection and specimen preparation, research and biomedical laboratory.

The stereo microscope optical scheme includes two channels sliding variable zoom which provides sharp and contrast 3-D image. The ergonomic universal stand incorporates built-in reflected and transmitted halogen illuminator.

Extra wide EW10X/22 eyepieces with diopter adjustment
Dual mode 6V / 20W halogen reflected and transmitted illumination
Variable Zoom 0.7X-4.5X
Total variable magnification 7X – 45X
Increased 95 mm. working distance for convenient operation
Ergonomic universal stand with tension adjustable focus mechanism
100mm Glass insert
Selection of “digital eyepiece” cameras and imaging software

Contact;
CanScope Canada
Toll-free: 1-877-56SCOPE(72673), Fax: 1-888-477-7739, Email: sales@canscope.ca

Motic BA300 Polarizing Microscope

Other Machines Comments Off

Motic BA300 Polarizing Microscope photo other machines metallurgy laboratory equipmentThis Motic polarizing microscope has the following specifications:

Microscope Head: Binocular polarizing microscope. Trinocular version is available with an 80/20 beam splitter. Call to special-order a head with a 100/0 beam splitter. Comes standard with widefield 10x eyepieces with diopters on each, one including a cross-hair reticle.
Microscope Body: Intermediate tube contains a 360° rotatable analyzer, compensator slot and Bertrand lens. The analyzer has a large rotation dial for easy adjustment and accurate reading during rotation. The Bertrand lens is focusable and centerable for the best conoscopic observations.
Viewing Head: Includes ergonomic viewing head with low positioned eyetubes. The head is adjustable vertically from 10° to 50° for comfortable, fatigue-free viewing. Interpupillary distance is adjustable from 52mm – 75mm.
Objective Lenses: Reversed, quadruple centerable nosepiece accommodates up to four strain-free polarizing objectives. Microscope comes with color corrected infinity system Strain-Free EF Plan 4x, 10x, 40x and 60x objectives. The 20x strain free objective can be ordered separately (shown below). The strain-free objectives provide improved polarizing performance.
Stage: Rotating ball-bearing stage rotates 360° for precise movement with vernier scale of 0.1mm increments.
Focusing: Low position coaxial coarse and fine focusing, minimum reading 2um.
Polarization: The polarizer is fixed on the bottom part of the condenser and features click-stops every 90°. The analyzer is a slider that is contained below the head of the microscope in the intermediate tube, along with the included Bertrand lens.
Condenser: Includes a NA 0.9 swing out achromat condenser (strain-free), rack and pinion.
Illumination: Koehler, 6v / 30w quartz halogen illumination.
Compensators: Polarizing microscope comes standard with an empty insertion plate to hold a tint plate, 1/4 wave plate or quartz wedge (all sold separately, see below).

Contact;
Microscope World
6122 Innovation Way
Carlsbad, CA 92009
1-800-942-0528 (M-F, 8am – 5pm PST) US TOLL FREE
1-760-438-0528 (We are GMT minus 8 hours) INTERNATIONAL
1-760-438-0553 FAX

Shopscope

Other Machines Comments Off

Shopscope photo other machines metallurgy laboratory equipmentUNITRON shopscopes are a system of modular, interchangeable optical and mechanical components that may be put together in a building block fashion to create a customized microscope system specifically suited to a particular application. As applications change, new components can be added or changed to meet new requirements. Shopscopes are regularly used for inspection and measurement as well as small parts inline assembly operations. They can be attached to precision alignment and drilling machines, as well as bonding, inspection and probe stations for semiconductor applications.

Key Features
Versatile, modular system that can be configured to fit specific applications
Utilizes a high resolution fixed optical or zoom objective system
Great for OEM applications

Contact Us
Unitron
73 Mall Drive
Commack, NY 11725
Phone: 631-543-2000
Fax: 631-589-6975
Email: info@unitronusa.com

Standard Range Fiberscope

Other Machines Comments Off

Standard Range Fiberscope photo other machines metallurgy laboratory equipmentFlexible fiberscopes allow remote visual inspection to be carried out in areas where the route to the area of interest includes negotiating a series of bends or where the length of instrument required is outside the limits of a rigid borescope.
The construction of an Olympus fiberscope is a specialized process, requiring a combination of advanced optical and mechanical technologies, resulting in a finished product with many high performance design features. The standardized fiberscopes achieve the highest image quality in 6.0mm, 8.4mm and 11.3mm diameter at lengths of up to 3.0m (10′) with design of four-way angulation and interchangeable optical tip adapters.

Features
SInterchangeable optical tip adapters
The focus of the optical system is fixed, however, each inspection has different requirements with regard to depth of field and direction of view. For this reason, all standard model fiberscopes have interchangeable optical tip adaptors to provide versatility and are available in direct or side viewing configuration – just select the tip adaptor most suitable for the application. Separately, a diopter focus compensates for the individual’s eyesight.

Image size
The Olympus image size is larger than most other fiberscopes. Due to the optical quality, the image of an Olympus fiberscope can be magnified and maintain a high resolution image.

TF Tube with superior insertability
Most of our fiberscopes employ the patented TF (Tapered Flex) Tube. Ideal for insertion into multiple-bend pipes, the insertion tube flexibility changes continuously-being highly flexible at the tip and rigid at the control section. As a result, these fiberscopes can easily be passed through bends and elbows. At the same time, the gradually increase rigidity of tube as it approaches control section assures easier transmission of publishing/ twisting strength after the first bend. All scopes featuring the TF Tube are marked with the logo shown below.

Contact;
Olympus Polska Sp.z.o.o
ul. Suwak 3
Warszawa, 02-676
Poland
Sales Team
Tel: +48 223-660-077
Fax: +48 228-310-453

FT190 Series Fiber Optic Illumination System

Other Machines Comments Off

FT190 Series Fiber Optic Illumination System photo other machines metallurgy laboratory equipmentVariable intensity 150W quartz halogen light source with 60mm I.D. annular light guide fits all RZ and EMZ stereo microscopes; adapter required for EMT and EMF stereos. All metal construction. UL-1571 and CE/CSA 2001 compliant. Available in 110V and 220/240V CE approved models. Two Year Limited Warranty. Color temperature: 3200K

Contact;
MEIJI TECHNO AMERICA
3010 Olcott Street
Santa Clara, CA 95054-3207

Standard Specifications for the MEC2 Inverted Metallurgical Microscope

Metallurgical Microscopes Comments Off

Standard Specifications for the MEC2 Inverted Metallurgical Microscope photo metallurgical microscopes Plan achromat 5x, 10x, 20x, and 50x objectives
Vertical action movement revolving nosepiece (fixed stage)
Coaxial coarse and fine adjustment; coarse stroke 37.7 mm per rotation with fine stroke 0.2mm rotation
Quintuple revolving nosepiece
Plain stage, 160 x 250mm, includes Ø10mm, Ø15mm, Ø20mm aperture teardrop stage insert plates
Mechanical stage, attachable type, dimensions 128 x 86mm; Stroke: 120mm (X) 78mm (Y)
Coaxial handle, attachable to the right or left side; stage extender plates dimensions 70 x 180mm
6 volt 30 watt halogen illuminator with lamp centering mechanism, built-in lever type condenser with aperture diaphragm, field diaphragm and filter slots
WF 10x/20mm focusing eyepieces with rubber eyeguards; eyepieces accept 26mm reticles
30⁰ inclined trinocular viewing head with 48-75mm interpupillary adjustment
Filters, (24mm in mount), daylight blue, green, yellow and ground glass

Contact;
Unitron
73 Mall Drive
Commack, NY 11725
Phone: 631-543-2000
Fax: 631-589-6975
Email: info@unitronusa.com

Meiji MT7500 Metallurgical Reflected Light Brightfield/Darkfield Microscope

Metallurgical Microscopes Comments Off

Meiji MT7500 Metallurgical Reflected Light Brightfield/Darkfield Microscope photo metallurgical microscopesThe Meiji MT7500 metallurgical microscope includes the following:

Objective Lenses: DIN Infinity Corrected Optical System (ICOS) Plan Epi BD 5x, 10x, 20x and 50x mounted in smooth-operating, ball bearing mounted, quintuple nosepiece.
Viewing Head: Siedentopf-type binocular head or trinocular head for camera integration. Each head has the eyetubes inclined at 30° with the left eyetube having graduated diopter settings. The interpupillary distance is adjustable between 53mm – 75mm. An 80/20 beamsplitter for the trinocular tube can be engaged for photo work. (100% to eyetubes or 80% to phototube & 20% to the eyetube.) 30mm ID eyetube.
Eyepieces: SWH10x Widefield High Eyepoint eyepieces F.N. 22 are standard with a 25mm reticle mount. 15x and 20x eyepieces are available as an option. Also avilable – Widefield High Eyepoint 10x focusable eyepiece that accept 25mm reticles.
Total Magnification: 50x, 100x, 200x and 500x.
Specimen Stage: Ceramic-coated flat-top stage 191mm x 126mm, with 100mm x 100mm of travel. Equipped with precision ball bearing guides and low position drop down coaxial controls for X-Y movement.
Illumination: Vertical illuminator with full Koehler design equipped with high intensity 12V 50 Watt halogen light source, field iris, aperture iris and filter slots. Capable of brightfield or simple reflected light polarization techniques. Includes blue clear, green clear, polarizing and neutral density (ND 50) filters in mounts. Automatic voltage (100v~240v) sensing power supply and variable rheostat control are built into the microscope base.
Focusing: Ergonomically low positioned coaxial focusing controls allow the operator to work with their forearms relaxed on the working surface. Range of travel is 23mm. Rotation of fine focus is 0.2mm per revolution.
Size & Weight:
Binocular – MT7520 477.5mm (18.8″)D x 471mm (18.5″)H x 210mm (8.3″)W, 8.9kg (19.6 lbs)
Trinocular – MT7530 477.5mm (18.8″)D x 526mm (20.8″)H x 210mm (8.3″)W, 9.6kg (21.2 lbs)

Contact;
Microscope World
6122 Innovation Way
Carlsbad, CA 92009
1-800-942-0528 (M-F, 8am – 5pm PST) US TOLL FREE
1-760-438-0528 (We are GMT minus 8 hours) INTERNATIONAL
1-760-438-0553 FAX

RMM-8T UNIVERSAL TRINOCULAR METALLURGICAL MICROSCOPE

Metallurgical Microscopes Comments Off

RMM 8T UNIVERSAL TRINOCULAR METALLURGICAL MICROSCOPE photo metallurgical microscopesProduces clear, sharp and brightfield images of prepared metal samples and other specimens. Standard magnification is 40x to 600x, which can be further increased up to 2000x with optional objectives and eyepieces. DIN Size coated optics are offered as standard equipment.
Trinocular observation head consists of adjustment for interpupillary distance, dioptic focussing and a lever for diverting light from Binocular Head to Photo-Tube. A common built-in transformer provides two illumination systems, 6V-20W, for vertical & transmitted light. Koehler’s type vertical illuminator provides ample reflected light for all visual, photo & camera requirements, at all magnifications, is fitted with filter slot, aperture & field diaphragms. Transmitted light illuminator is provided with sub-stage condenser for background lighting of holes, pits and translucent objects. Coaxial coarse & fine focus control knobs move the stage and low-positioned co-axial mechanical stage knobs are adjacently placed for convenient control.
Standard Optical combination :
Achromatic Flatfield DIN Objectives – M4x, M10x and M40x.
Widefield Eyepieces – WF 10x and WF 15x (Paired) and P7x Eyepiece.

COntact;
radical
123, HSIIDC Industrial Estate,
Ambala Cantt – 133 006,
Haryana (INDIA)
Tel:- +91-171-2699485, 2699137, 2699138
Fax:- +91-171-2699543

Metallurgical Microscopes MT7000 Series

Metallurgical Microscopes Comments Off

Metallurgical Microscopes MT7000 Series photo metallurgical microscopesMeiji Techno’s new upright Brightfield incident light metallurgical microscope is the new and cost-effective MT7000 Series Microscope. The MT7000 Series employs all new and improved optics. Meiji Techno’s ICOS™ (Infinity Corrected Optical System) makes the observation and evaluation of metallurgical specimens fast and easy while delivering an excellent cost-to-performance ratio. The MT7000 Series features include:

Computer Aided Design
Ergonomically positioned controls
Comfortable Siedentopf viewing head
30W Vertical Koehler Illuminator with auto sensing power supply
Brightfield observation mode
Optional Ergonomic binocular viewing head available

Contact
MEIJI TECHNO AMERICA
3010 Olcott Street
Santa Clara, CA 95054-3207
Toll free USA:
Phone:
Fax:
(800) 832-0060
(408) 970-4799
(408) 970-5054

Microscope Solutions GX51

Metallurgical Microscopes Comments Off

Microscope Solutions GX51 photo metallurgical microscopesThe GX51 inverted microscope provides stability to support excellent image clarity and superb resolution with high magnifications and comfortable operability with the option to add many accessories including digital cameras and software solutions.

GX51 is available for brightfield, darkfield, DIC, and simple polarization observations. Switching between brightfield and darkfield is simple and easy with an ergonomic efficiency. Operator controls are located in front of the frame for ease of operation and user comfort when inspecting large numbers of samples.
Enhanced Efficiency Through Motorization

The use of motorized components can save time and cut costs when large quantities of samples require analysis A single handset is available to quickly control the rotation of objectives. For higher levels of speed and analysis, Stream Image Analysis Software is will manage additional components such as the motorized filter wheel and automated scanning stages

Contact;
Olympus
3500 Corporate Parkway
Center Valley, Pennsylvania 18034
USA

Sponsored links