Over 85 years of rip saw manufacturing experience has been put to use developing the SL series of straight line rip saws. The SL-35 features a 15 HP arbor motor, vertical arbor adjustment, and a 2 HP variable speed drive that gives the capacity for higher feed speeds.

Diehl’s proven chain/race, spindle/arbor and pressure roll system make up the foundation for this saw that produces the industry’s most accurate glue line cut, guaranteed. The Diehl SL-35 is the rip saw that you can depend on for continuous quality performance.

Arbor Motor 15 HP (11.2 Kw), 20 HP (15 Kw) optional
Feed Motor 2 HP (1.5 Kw)
Feed Speed variable, 50 – 140 FPM (12 – 42 mpm)
Stock Capacities 1/8” (3 mm)
Minimum Thickness 1.5” (38 mm)
Maximum Thickness 2.55” (64 mm)
w/14” (355 mm) blade
w/16” (406 mm) blade
Minimum Length
Saw Blade Arbor Bore 2” (50.8 mm)
Throat Capacity 19” (482 mm)
Arbor RPM Belt Driven 3450
Accurate Glue Line Cut (either straight or hollow) up to 5’ (1.5 m)

Voltages Available
208/240/480/575, 3 phase, 60 cycle
380, 3 phase, 50 cycle
w/110 control circuit
Spindle Brake automatic
Vacuum 1 – 6” (152 mm) and 1 – 3” (76 mm) opening
1250 CFM (35c mm) required
Upper Anti-Kickback Fingers w/Cam Controlled Height
Lower Anti-Kickback Fingers in Table
Dimensions 65” (1651 mm) L x 53” (1346 mm) W x 56” (1423 mm) H
Weight net 2,750 lbs. (1250 kg)
crated 2,960 lbs. (1345 kg)
crated for export shipment 3,275 lbs. (1485 kg)
Worktable Height nominal 34” (864 mm)

Contact;
Diehl
P. O. Box 465, Wabash, IN 46992 • 260-563-2102 • US FAX For Parts And Service 1-800-228-9115
International FAX 260-563-0206 • www.diehlmachines.com

Our rip saws come in 2 series; the AMA 300 & the AMA 450. The 300 series is equipped with a 12″ Arbor and 24-125hp Motors. The 450 series rip saw is equipped with an 18″ Arbor with outboard bearing and 20-115hp Motors.

Rip Saw Specifications
» 4 ¼” thickness capacity
» 10″, 12″ & 14″ blade capacity
» Feed speeds up to 160 F/M
» 6 hold down rolls for handling short materials
» Double V rail system for precision feeding
» Ductile iron chain for long and dependable service life
» Electric lubrication system to protect chain & rails
» Moving saw system can be installed at anytime
» Star delta wiring for reduced electrical costs
» Set up stand for safe handling of saws & sleeve

Contact;
River Valley Machinery
P.O. Box 129
East Livermore, Maine 04228
USA
Call: 207. 897.5300
Fax: 207.897.2888
Email: |info@rivervalleymachinery.com|

The SRS-12 is the flagship rip saw of the entire Northtech lineup. Ideally suited for the millwork, cabinet, and furniture companies requiring both maximum performance and affordability.

* Guarantee glue line accuracy to 8′
* Safety engineered throughout on SRS-12
* Double rows anti-kickback fingers
* Electric oiler allows constant lubrication
* Auto shut-off of chain if oil levels are low
* One piece heat treated chain and race
* 5 speed and variable speed models are available
* 15HP main drive motor
* Available with single phase saw arbor motor (up to 7.5HP), or without motors and controls for line shaft setup
* 24V LVC controls
* Robust 2100lb construction
* Available with return conveyor

Contact;
Northtech
819 E. Liberty Street
Louisville, KY 40206
Telephone: (502) 719-0015
FAX: (502) 719-0014

The SCM M3 gang rip saw represents reliability, accuracy and proven performance in one economical pass. Backed by 50 years of research and experience, it is dollar-for-dollar the best gang rip saw value on the market. The M-3 is a classic Gang Rip Saw design built for daily production at high feed rates. Ease and simplicity of operation make the M-3 the gang rip saw of choice in the industry. For added safety, the machine is equipped with emergency stops, five rows of kickback fingers and an amp meter. It also includes automatic chain lubrication and high precision guide-ways to ensure accurate material processing.

* 3,787 pounds
* 11 7/8″ machining capability
* Available with 42 and 60 HP motors
* Variable feed speeds ranging from 30 to 150 FPM (minimum stock length is 11 3/4″)

Contact;
SCM GROUP USA
2475 Satellite Blvd
Duluth, GA 30096
P: 800-292-1850
F: 770-813-8819

Mereen-Johnson Roll Feed Multiple Rip Saws are designed for high speed production ripping prior to secondary processing. Common applications include millwork plants, re-manufacturing operations, truss manufacturing, manufactured housing and flooring plants.

Key Benefits
* Suited for operations ripping up to 15,000+ board feet per day.
* Capable of ripping materials up to 5″.
* Standard with direct coupled arbor motors. Optional belt drive motors to 300 HP.
* Feed rolls driven by 4 independent Synchro motors.
* Double cast iron column hold down supports.
* Available in 12″, 24″, 31″, and New 40″ arbor capacity.

Optional Equipment
* Laser Line Lights
* Sound Enclosures
* Infeed Conveyor Systems
* Additional Saw Sleeves & Spacers
* Tooling

Contact;
Mereen-Johnson Machine Company
4401 Lyndale Avenue North
Minneapolis, MN 55412 USA
Phone (888) 4MJ-SAWS
(612) 529-7791
Fax (612) 529-0120
General Information:info@mereen-johnson.com

Designed to provide for accurate miter cuts and precision cut lengths to assure all four corners of the mitered assembly fit properly. Precision saw blade carriage and chip breaker system assure chip free cutting to enhance mitered corner joint quality.

STANDARD FEATURES: D45AX

* 12″ blade diamenter capacity
* (2) 1.5 h.p. spindle drive motors, tefc
* (2) VC3 vertical material clamps
* CB chip breaker
* T60 extended table work support-60″ long left & right hand
* DIG/6′ digital length measurement system
* Foot pedal actuated cutoff cycle
* 6″ dust collector outlet
* Disconnect switch
* Safety blade guard interlock
* Machine weight: 600 lbs

Contact;
Ritter Manufacturing, Inc.
1300 B West 4th St.- Antioch, CA 94509
(925) 757-7296 – Fax (925) 757-7083

Makita LS1013X Mitre Saw Features
* Blade diameter 260mm.
* Arbor 30mm.
* Max. cutting capacities: 90°/90° 91 x 305mm.
* 45°/45° left or right 50 x 215mm.
* No load speed 3,700 RPM.
* Motor 1430 wat.
* Net Weight 21kg..
* Precision bevel cutting up to 45° both left and right.
* Mitre cuts 57° right and 47° left with 9 positive stops at 15°, 22.5°, 31.6°.
* 45° left or right and 0°.
* Adjustable pivot fence for supporting larger stock Cuts a 2 x 12 at 90° and a 2 x 8 at compound 45° left.

Makita LS1013X Mitre Saw Includes
* 64 Tooth TCT Blade.
* Vertical clamp.
* Socket wrench #13.
* Dust bag.
* Triangular rule.
* 2 x Extension wing.
* With free stand

Contact;
1-800-4 MAKITA

Metabo KGS255 Crosscut Mitre Saw Features
* Cuts up to 255 mm wide in one pass.
* Tilt of the saw head from 0 – 45°.
* Pull function on precision bearings for exact cutting results up to 255 mm.
* Horizontal angle adjustment left and right up to 47°.
* Saw blade lock for easy changing of saw blade.
* Powerful universal motor.
* Trenching facility enables a constant groove depth.
* Cutting depth up to 60 mm.
* Integrated retaining grooves: side extension in simply clamped secure, without any tools.
* Light and stable – for easy transportation.
* Adjustments horizontal 2 x 47° Degree graduation stepless, (preset points at 15°, 22.5°, 30°, 45°).
* Saw head left 45°.

Metabo KGS255 Crosscut Mitre Saw Specifications
* Dimensions L x W x H 508mm x 747mm x 470 mm.
* Bench size 437mm x 272 mm .
* Saw blade HW 210/30 mm 24 WZ.
* Cutting width 90°/45° 255mm / 177mm.
* Cutting depth 90°/45° 60mm / 30mm.
* Available in 240v / 110v please choose.
* Motor power 1300w S3 20% 5 min.
* Weight 14.5 kg.

Contact;
Metabowerke GmbH
Postfach 1229
D-72602 Nürtingen
Tel.: +49 – (0)7022 – 720
Fax: +49 – (0)7022 – 72 25 95

Einhell BT-SM2050 Sliding Cross Cut Mitre Saw Features
* This sliding mitre saw has a carbide tipped saw blade and a rotating table for precise angle cuts ranging -45° to +45° with positions of lock.
* Supplied with a clamping device for safely fixing of the work piece and a double pivoted sliding feature.
* The tilting motor head continuously from 0° to +45°
.

Einhell BT-SM2050 Sliding Cross Cut Mitre Saw Technical Data
* Mains 240v.
* Power 1700 watt.
* No Load Speed 4800.
* TCT saw blade included 210mm × 30mm with 24 teeth.
* Cutting width max 205mm.
* Maximum saw width 90° – 205mm x 65mm, 45° – 140mm x 65mm 2 x 45° 140mm x 40mm.

Einhell BT-SM2050 Sliding Cross Cut Mitre Saw Includes
* 2 year warranty.
* Dust bag.
* Bilateral support clamps.
* 210mm x 30mm x 24 teeth blade included.

Contact;
Einhell UK, Unit 5,
Morpeth Wharf, Twelve Quays,
Birkenhead,
Wirral,
CH41 1LF
T: 0151 6491500
F: 0151 6491501
sales@einhell.co.uk
technical@einhell.co.uk

Ryobi EMS-2026SCL 10in Sliding Compound Mitre Saw Features
* Exactline Laser Technology.
* Ergonomically designed handle for improved comfort.
* Powerful 2000 watt motor, producing 4,500 rpm.
* Extra wide side extensions to support large timber.
* 9 pre-set index angles including: 0°, 15°, 22.5°, 30° and 45°.
* Fully adjustable depth stop for trenching.
* Sliding fence adjusts for increased work support.
* Quick action Mitre Lock handle for faster mitre settings.
* Repeat cut support for quick and accurate repeat cutting.
* Built-in spindle lock for easy single wrench blade changes.
* Easy to read scales for maximum accuracy.
* Livetool Indicator.

Ryobi EMS-2026SCL 10in Sliding Compound Mitre Saw Specifications
* Power 2000w.
* Blade diameter 254mm.
* Blade type 40 Tooth TCT.
* Arbor Size: 30 mm.
* Weight: 20Kg.

Ryobi EMS-2026SCL 10in Sliding Compound Mitre Saw Capacity
* 90° mitre / 90° bevel 305mm x 90mm.
* 90° mitre / 45° bevel 305mm x 42mm.
* 45° mitre / 90° bevel 215mm x 90mm.
* 45° mitre / 45° bevel 215mm x 42mm.

Ryobi EMS-2026SCL 10in Sliding Compound Mitre Saw Includes
* 40 tooth blade TCT.
* Extensions.
* Clamps.
* Dust bag.
* Wrenches.
* 2 Year Warranty.

Contact;
Ryobi
Contact Customer Service:1-800-525-2579