Finish Machining for Hydro Turbine Shaft. We could offer the dydro turbine shaft according to our customers’ need. Also we could offer the machining service for our guest.
We mainly produce the Heavy Casting and Forging for power station, including Forging, Heat Treatment and Machining.
The main products are the rotor and shaft for Hydro Turbine, Rotor and shaft for Steam Turbine, shaft for Wind Turbine, pipe die ect.
Zhongheng Heavy Machinery Co., Ltd.
No. 28, The 3rd Section of South Lushan Road,
Deyang, Sichuan, China
Zip/Postal Code: 618000
Axial Flow Turbine Generating Set (Kaplan Hydro Turbine)
The Axial water turbine((Kaplan)) is suitable for low and medium heads from 2 to 30 meters.The blades are fixed or adjustable. The fixed blade propeller water turbine is used for medium and small sites with small variation of head and load, and the Kaplan turbine is used for medium and large sites with large variation of head and load.
Hunan Xuefeng Mechanical & Electrical Equipment Manufacture Co., Ltd.
The New Industrial Zone, Dongkou, Shaoyang, Hunan, China
Zip/Postal Code: 422300
Propeller/Kaplan Type Hydro Turbine. Water Head Applicable: H=2m~40m, the propeller type is with fixed runner, generally used for the small load and water head changing, the Kaplan type is with adjustable runner by oil pressure equipment to adapt to the load and water head changing to get the higher average efficiency, the efficiency of some of the Kaplan type turbine is higher than 94%.
Zhuzhou National Engineering Research Center Of Converters Co., Ltd.
No. 289 North Hongqi Road, Zhuzhou, Hunan, P. R. China
Zip/Postal Code: 412000
Hydro Power Station Equipment. China is the most successful country in the world for developing small, medium and large size hydraulic power stations. Our manufacturer is the manufacturing base of the United Nations Small Hydro Power Center (UNISHPC). The first Double-Directional Tubular Bulb Tide Turbine Generating Unit in China was made in our manufacturer.
Products: Kaplan, Tubular, Francis and Pelton Turbine, Generators, Governors, Excitation System, Control Cabinet, Automation Components, Inlet Valves, etc
Scope of Supply and Works: Individual equipment, complete hydro power plant, design, manufacturing, supervision for installation/commissioning, rehabilitation of old hydro power plant, etc.
Head: 3 m to 1200 m
Power: 0.2MW to 200 MW in capacity
Credential: ISO9001: 2000
Export: About 50 countries and regions in the world including U. S. A, Canada, Japan, Norway, Pakistan, Iran, Turkey, India, Zambia, etc.
Dalian Etdz Xiupu Science Co., Ltd.
Rm.403, Building B2, Fifth County (Xinzhaizi),
Ganjingzi District, Dalian, China
Zip/Postal Code: 116039
Forging Steam Turbine Shaft/Forged Hydro Turbine Shaft. This is forged hydro turbine shaft. Jiangsu Songyan International Trade Co., Ltd is a professonal forging parts manufacturter in China, the member of Confederation of Chinese Metalforging Industry(CCMI), an AAA Credit Grade Certificate enterprise. The company has 400 emplyees, which include 5 senior engineers, 28 intermediate engineers and 148 technicians.
With high standard quality control policy, songyan products have gained many certifications, such as CCS, BV, DNV, LR, NK.
Since establised in 1997, our forging parts has been exported to many countries, such as American, European countries, Asian countries, and so on. Our products are widely used in petroleum and chemical industry, power generation, shipbuilding, heavy machinery, and so on. We can forge any type of Carbon, Alloy and Stainless steel. Some of steel grade are given below.
General Steel Grade: C20, C35/35C8, C40/EN8, C45/Ck45, AISI1050 EN19/42CrMo4, EN24, 34CrNiMo6; 30CrNiMo8, 15CDV6.
Boiler and pressure vessel grade: ASTM A105, ASTM A266GR. ASTM A266GR. ASTM A350 LF2.
Heat resisting grade: 13CrMo44, 21CrMoV5.21CrMoV57, 28CrNiMoV59.
Case Carburizing grade: 17CrNiMo6.
Stainless steel grade: Austenitic: ASTM A182 F316/F304/. F304LN / 304 N2 / F316 / F316 LN / F321 / 347. Martenitic Stainless steel: ASTM F6A CL2, AISI 410, AISI420, AISI430, AISI430F. Duplex stainless steel: 2205, 2507, 2304, F55. Precipitation-hardened stainless steel: 17-4PH, 17-7PH, 630, 631. Special stainless steel: 904L.
TOOL & DIE STEELS: H11, H13, DIN 1.2714, AISI D2.
Super Alloy: Inconel600, Inconel601, Inconel 625, Inconel690, Inconel718, Inconel725, InconelX_750, Inconel800, Inconel800 HT, Inconel 825, Inconel901, Inconel903, Incoloy800H, Incoloy901, Incoloy800, Incoloy800H/AT, Incoloy825, Incoloy925, Monel400, MonelK500, NS111, NS112, NS142, NS143, NS312, NS313, NS315, NS321, NS335, NS322, NS333, NS334, NS336, NS336, Carpenter20Cb3, Carpenter42(4J42), HastelloyB, HastelloyB2, HastelloyC, HastelloyC276, HastelloyC4, Hastelloy C, Hastelloy C-22, Hastelloy C-276 Hastelloy X, Maraging C200/250/300/350, 30W4Cr2VA, Invar 36, Invar 36 FC, Alloy 42
Raw Material, Forging, Heat treating, machining, testing and inspection facilities are organised to provide superior forging parts. We sincerely welcome the friends from all over the world visit songyan and have business with us. This will be a win-win chance. Do not hesitate, and just contact us now.
Jiangsu Songyan International Trade Co., Ltd.
No. 115, South Tongdu Road, Jiangyin City, Wuxi, Jiangsu, China
Zip/Postal Code: 214400
Telephone Number: 86-510-86119955-877
Fax Number: 86-510-86119997
Hydro power turbine
Specifications The diameter of the runner is 0.35m- 1.1m;
Suitable water head: H =30m- 700m;
Suitable flow: Q =0.20m3/s- 200.0m3/s;
Capacity of the generator unit: 50kw -12000kw.
Advantages Francis Type Turbine-Generator is suitable for hydropower station of middle or high water head and medium-sized flow
Because the structure of the Turbine-Generator is simple, and it is reliable to run, . Suitable for various water head and include many types of runners, they can be widely used. It is suitable for hydropower stations whose water head change largel
Hydro power francis turbine
The diameter of the runner is 0.35m- 1.1m;
Suitable water head: H =30m- 700m;
Unit: 50kw -12000kw
Hongya Power Generating Equipment to Utilities Limited
Yuping Town, Hongya Country, Sichuan, China
Zip/Postal Code: 620360
Telephone Number: 86-28-37561966
Fax Number: 86-28-37561788
Water Hydro Turbine- Medium Water Head of 3kw. This kind of Micro-hydro Generator is consisted of an inclined impulse turbine and a set of direct connected AC single-phase / three-phase generator. With the characteristics of small body, lightweight, simple structure, reliable operation and convenient assembly, and serving as the power source of lighting, TVs and recorders, it is most suitable for the households in mountain areas with scattered and small hydroelectric sources. The consumers can do easily themselves the installation and operation. This product has been thoroughly strengthened in the special technical measures to good quality, stable function and easy operation for women and children. Much less investment may add more happiness to your family.
Model Power Head (m) Rate of flow Rotational Speed Install tube diameter
(W) (m3/s) (rpm) (mm)
MH-3KW 3000 4 0.136 1000 250
MH-5KW 5000 6 0.151 1500 300
MH-6KW 6000 7 0.156 1500 300
MH-8KW 8000 9 0.161 1500 300
MH-10KW 10000 11 0.165 1500 300
Yueqing Zonhan Windpower Co., Ltd.
No. 195 Chengxi Road, Yuecheng, Yueqing,
Wenzhou, Zhejiang, China
Zip/Postal Code: 325600
Telephone Number: 86-577-62529820
Fax Number: 86-577-62529821
Hydro Turbine/Shpp/Francis Turbine
1. Water head: 10 to 300m
2. Power: 100kw-50Mw
3. Runner diameter: 0.35 to 4.0 m
4. Vertical and horizontal
5. CE Certificate
The Francis turbine is a type of water turbine that was developed by James B. Francis. It is an inward flow reaction turbine that combines radial and axial flow concepts. Francis turbines are the most common water turbine in use today.
The Francis type turbines are mostly suitable for hydro-power stations with medium or high head. The Francis type turbines manufactured by the Fuchun are compact in structure, reasonable in design, convenient in operation and maintenance and excellent in efficiency. They are in both vertical and horizontal shaft arrangement and can be vastly selected by the hydraulic power stations. With many years of our own experience and absorbing advanced technology from domestic and abroad sources, and in meeting ever growing requirements of stations for various hydraulic power resources, the manufacture and design level of Francis turbines made in Fuchun has been raised to new stages.
Fuchun Industry Development Co., Ltd. Shenzhen
Room 1125, Noble Plaza, No. 269 Qianjin 1st Road,
Baoan District, Shenzhen, Guangdong, China
Telephone Number: 86-755-88832333
Fax Number: 86-755-27809820
Water Turbine Microcomputer Governor:
Suitable for all kinds of water turbines, such as Francis turbines, Kaplan turbines etc.
SHPE sticks to Consulting Based Marketing Concept and Service Oriented Marketing Concept. By virtue of abundant technical strength and long-term experience, SHPE is able to provide customers from all over the world with comprehensive technical consulting service. SHPE is the first enterprise in China’s Hydro Industry to initiate two years of DLP and Regular Customer Return Visit. Meanwhile, SHPE, as the manufacturer of Electric & Mechanical equipment for hydro power plants, has a long lasting tradition in maintenance and refurbishment of wearing-out equipment and low efficient plants. Generally speaking, refurbishment that done by SHPE may result in the increase of reliability, the increase of power generation of electric energy, the increase of static and dynamic stability and the increase of efficiency. It is always the objective and desire of SHPE to obtain total customer satisfaction by contributing the utmost interests to domestic and overseas customers.
Hunan Sunny Hydropower Equipment Corporation
Shanli Industry Park, Daxing West Road,
Jinshi Town, Xinning County (422700), Hunan, China
City: Shao Yang
Country/Region: China (Mainland)
Mobile Phone: 15873969755
Hydroelectric turbine governor is a kind of automatic control equipment for turbines of waterpower station
According to change of load, guide-water impeller, spray outlet and rotary impeller are changed accordingly. The later turbine governors in hydro-power stations have been renewed and designed adopting advanced cartridge valve control technique on the basis of the advanced Sweden KMW technology, and every performance indexes of the governors meet the national standards GB9625-88, and SD295-88, so that when completed several performance indexes such as the rotating speed dead space 0.014%, and the juncture motionless period 0.18 second are much better than those of any other governors.
Zhongnan Equipment Company Ltd.
No. 1, Qingdaolu, Dongshan Development Zone
City: Yichang City
Country/Region: China (Mainland)
Mobile Phone: 13508601771