Sponsored links

 

DPA 75 Insulating Oil Tester

Dielectric Strength Test Systems Comments Off

DPA 75 Insulating Oil Tester photo dielectric strength test systems

Description
DPA 75 Insulating Oil Tester
Specifications
Fully automatic dielectric strength testing performed up to 75 kV rms
For testing all kinds of insulating liquids for transformer switchgear and oil insulated cables

Contact
BAUR Pruf- und Messtechnik GmbH
Raiffeisenstrasse 8
6832 Sulz / Austria
Tel. +43 / 55 22 / 4941-0
Fax +43 / 55 22 / 4941-3
headoffice@baur.at
www.baur.at

Transformer Oil Dielectric Strength Tester

Dielectric Strength Test Systems Comments Off

Transformer Oil Dielectric Strength Tester photo dielectric strength test systems

Description
Transformer Oil Dielectric Strength Tester. Transformer oil dielectric strength tester is designed as per the latest international IEC standard for testing the breakdown voltage of the transformer oils. These Transformer oil dielectric strength testers can be availed at industrial leading price.

Contact
ChongQing Qianneng Industry Group Co., Ltd.
YUZHONG DISTRICT, Chongqing – 400014, China
Key Personnel : Mr. Evan Wang (Marketing Director)
Mobile : +8615310307277
Phone : 86-23-62150912
Fax : 86-23-66267400

AC/DC dielectric strength test

Dielectric Strength Test Systems Comments Off

AC/DC dielectric strength test photo dielectric strength test systems

Description
AC/DC dielectric strength test. product description : this family of high voltage cable tester is built with a unitary relay switching matrix, and allows to test groups of points against other group of points

product details :
▪ ac/dc dielectric strength test
▪ insulation measurement
▪ four wires continuity
▪ shielding detection
▪ functional/stimuli testing
▪ component testing
▪ transorb, gmov measurement

Contact
Sefelec
19, Rue Des Campanules 77185 Lognes, France
Cambrai, Nord-Pas-De-Calais-77185, France
Phone: +(33)-(01)-64118342

Insulating Oils Dielectric Strength Automatic Tester IJJ(D)-80

Dielectric Strength Test Systems Comments Off

Insulating Oils Dielectric Strength Automatic Tester IJJ(D) 80 photo dielectric strength test systems

Description
Insulating Oils Dielectric Strength Automatic Tester
Brief introduction:
IJJ (D)-80 series insulating oils dielectric strength automatic tester is a new generation full automatization bdv testing instrument developed on the basis of the hcj-9905a model, which is designed according to the international standard iec-156 and national standard gb507-86 (insulating oils- determination of the dielectric strength) requirements, and meet the various users’feedback and opinions.

Using setting firstly, start up testing secondly method, it is adopted scm as the leading, the whole testing procedure automatically run and controlled by the microcomputer. It is simply operated and convenient used.

Application and features:
It is suitable for testing various kinds of insulating oils dielectric strength. The main features as the following:
1. It has the automatic detection function, ex. It could automatic turn into the reset mode and execute the voltage regulator return to zero.
2. It is adopted the mini type tpu-a panel printer to automatically print the testing results.
3. It could be altered the testing frequency, stirring and stewing time, voice controlled and light controlled alarm, continuous printing and none printing according to the user’s requirements.
4. It is used the automatic magnetism oscillator stirring the insulating oil in the oil sample cup avoiding the oil sample misproportion and gas bubble.

Technical specifications
1. Power supply: Ac 220v +/-10%, 50 hz +/-5%
2. Measuring range: Ac 0-80 kv
3. Limited current: 5 ma
4. Measuring accuracy: 1%
5. Voltage regulating rate: 2kv/s +/-10%
6. Reservation setting:
Frequency: 1-9
Stirring time: 0-99 seconds
Stewing time: 0-999 seconds
7. Working condition:
Ambient temperature: 0 c-35 c
Relative humidity: ≤75%
8. Oil cup gap: 2.5 mm (the diameter of oil cup gapgauge)
9. Dimension: 415x315x315mm
10. N. W.: 28 kg
11. G. W.: 38 kg

Accessaries:
1. Operation instruction of oil tester 1 pc
2. Operation instruction of printer 1 pc
3. Special oil cup 1 pc
4. Power cable 1 pc
5. 3A fuse 4 pc
6. Magnetic rotator 1 pc

Contact
Chongqing Green Environmental Protection Equipment Manufacture Co., Ltd.
Annex59-6-4, No. 92, Shabei Street,
Shapingba District, Chongqing, China
City/Town: Chongqing
Province/State: Chongqing
Country/Region: China
Zip/Postal Code: 400030

Transformer Oil Dielectric Strength Test Unit

Dielectric Strength Test Systems Comments Off

Transformer Oil Dielectric Strength Test Unit photo dielectric strength test systems

Description
Transformer Oil Dielectric Strength Test Unit
1. Simple operation, high degree of automation (just press a button)
2. Using the menu management, easy to understand the input parameters
3. Can store 99 groups oil sample test data to facilitate future access to and print, test data can be stored in power off state for 10 years.
4. The system clock in the power off state can continue to run.
5. Through the RS232 port with a software upgrade or with the PC, on-line detection.
6. Anti-interference ability
7. Detection with high precision
8. Small size, light weight, easy operations

Contact
Chongqing Zhongneng Oil Purifier Manufacture Co., Ltd.
13 Huoju Street, Jiulong Industrial Park,
Jiulongpo District, Chongqing City. China
City: Chongqing
Province/State: Chongqing
Country/Region: China (Mainland)
Zip: 400039
Telephone: 86-23-68060921
Mobile Phone: 0086-13996400162
Fax: 86-23-68060921
Website: www.zhongnengcq.cn

Programmable DT tester

Dielectric Strength Test Systems Comments Off

Programmable DT tester photo dielectric strength test systemsProduct description : THE DT SERIES -P TYPE IS AN AC HIGH VOLTAGE TESTER (ALSO CALLED AC DIELECTRIC TEST SET, AC HIPOT TEST
SET, HIGH VOLTAGE TEST SET, AC DIELECTRIC STRENGTH TESTER), CONTROLLED BY A PROGRAMMABLE MODULE.
OUR AC DIELECTRIC TEST SYSTEMS CAN BE PRESENTED AS A SINGLE RACK UNIT WITH OR WITHOUT CAGE, OR SEPARATED UNITS (CONTROL ON ONE SIDE, TRANSFORMER ON THE OTHER SIDE) ACCORDING TO THE MAIN
INTERNATIONAL STANDARDS

Product details :
▪ AC dielectric strength tester from 1, 5, 10, 15, 20, 30, 40, 50, 60, 80, 100, 120, 130, 150, 180, 200, … to 400 kVAC (maximum power 500 kVA)
▪ DC dielectric strength (option)
▪ Single ramp or multi ramp testing
▪ Voltage and current permanent monitoring
▪ Burning mode, duty cycle, compensation (option)
▪ RS232C interface (option)
▪ Control software (option)

Contact;
SEFELEC | 19, rue des Campanules | 77185 LOGNES | FRANCE 01 64 11 83 41 | EXPORT +33 (0)1 64 11 83 42 | FAX +33 (0)1 60 17 35 01

Clare A252

Dielectric Strength Test Systems Comments Off

Clare A252 photo dielectric strength test systemsA versatile portable test set providing simple straightforward operation and effective electrical safety testing of office equipment, power tools and appliances. The A252 electrical safety tester performs earth bond, flash and insulation tests.

Ideal for use in service and maintenance departments and rental stores, it connects to both 110V and 240V appliances and provides clear, simple results on a large moving scale. The condition of the appliance under test is indicated by both audible and visual signs.

The tester offers earth bond testing at three separate currents and a selection of five high voltage tests with two selectable trip levels.

Technical specification

Measurement functions
Bond 25A, 8A and 100mA from 8V a.c.
Earth With 0 – 1W meter display
Flash test 500V, 1250V, 2500V, 3000V & 3750V AC, 5 and 10mA trip
Insulation resistance 500V DC, 0-100MW

Features
Visual alarm yes
Audible alarm yes

Environment
Size 210 x 140 x 250mm
Weight 10kg
Standards Conforms to IEC 61010
Power 230V 5A 50Hz
EN50191 Compliant Yes (when used with certain accessories)

Contact;
TH&L Systems s.r.o.
Ruska 110
Prague 10
100 00
Roman Dezort
T: +420 271734388
F: +420 0267315907

http://www.thlsystems.cz

ClareHAL 104

Dielectric Strength Test Systems Comments Off

ClareHAL 104 photo dielectric strength test systemsThe ClareHAL 104 multi-function tester takes the features of the rest of the ClareHAL range and combines them into one easy unit. The simple intuitive user interface enables easy push-button manual testing, alternatively the full potential of this tester can be used to automate the testing sequence for fast performance on the most demanding production lines.

Tests can be started and stopped at the push of a button or choose from a variety of pre-selected automated configurations, including remote PCs, PLCs or interlocks. The internal memory stores up to 6000 test results and can be interfaced with various accessories. Tests: Earth bond, AC flash (hipot), DC flash (hipot), DC insulation resistance, ARC detection, Leakage, Load power, Power factor.

Technical specification

AC Flash / Hipot Test
Programmable Voltage Range 0.10 kV-5.00 kV (10V/Step Resolution)
Frequency Independent of Supply 50 or 60 Hz
Voltage Display Range and Accuracy 0.10 kV-5.00kV ±1% ± 5 Counts
Voltage Display Resolution 0.01kV
Current Display Range and Accuracy 0.01mA-20.00mA ±1% ± 5 Counts
Current Display Resolution 0.01mA
Selectable Range of Pass/Fail Levels 0.01mA-20.00mA
Maximum Current Output 20.00mA @5kV
Maximum Current Output Optional Arc Detection 9 Levels

DC Flash / Hipot Test
Programmable Voltage Range 0.10 kV-6.00 kV (10V/Step Resolution)
Programmable Voltage Range Voltage Display Range and Accuracy 0.10 kV-6.00kV ±1% ± 5 Counts
Voltage Display Resolution 0.01kV
Current Display Range and Accuracy 0.01mA-10.00mA ±1% ± 5 Counts
Current Display Resolution 0.01mA
Selectable Range of Pass/Fail Levels 0.01mA-10.00mA
Maximum Current Output 10.00mA
Optional Arc Detection 9 Levels

Contact;
Seaward Group USA
6304 Benjamin Road,
Suite 506
Tampa
Florida
33634
Frank Belluccia
T: +813 886 2775

http://www.seaward-groupusa.com

PREMIER 2705A Hipot tester

Dielectric Strength Test Systems Comments Off

PREMIER 2705A Hipot tester  photo dielectric strength test systemsProduct description : Dedicated for production line or other environments, Premier series is synonymous of low cost but high benefits for your hi-pot testing solutions

Product details :
▪ AC/DC dielectric strength test, continuity check
▪ RS232 interface (option)
▪ PLC control for start/stop and test result output
▪ dedicated for production lines
▪ easy to use interface
▪ complies with the following safety testing standards : EN61010-1, EN60065, EN60335-1, EN60598-1, EN60601-1, EN60950, CEI990, and many others

Contact;
SEFELEC | 19, rue des Campanules | 77185 LOGNES | FRANCE 01 64 11 83 41 | EXPORT +33 (0)1 64 11 83 42 | FAX +33 (0)1 60 17 35 01

DIELECTRIC STRENGTH TESTER RXS50

Dielectric Strength Test Systems Comments Off

DIELECTRIC STRENGTH TESTER  RXS50  photo dielectric strength test systemsProduct description : Designed as well for laboratories as for production lines, the XS Series is our new Electrical Safety Tester generation.

Cheaper, faster, better, based on new technologies, the XS Series can offer advanced features such as optimized accessory management, Ethernet interface, faster test times, and industrial interfaces.

Product details :
▪ Hipot up to 5 kV AC 10 mA nominal current / 13 mA short circuit current
▪ fully automatic testing
▪ standard RS232, optional IEEE488-2, Ethernet, or PLC
▪ SXSPRO multi-lingual software
▪ easy to use and user friendly interface

Contact;
SEFELEC | 19, rue des Campanules | 77185 LOGNES | FRANCE 01 64 11 83 41 | EXPORT +33 (0)1 64 11 83 42 | FAX +33 (0)1 60 17 35 01

Sponsored links