*
Ruggedly designed chases with adjustable jacklegs for slop setting.
*
Insulated Dryer Drum gives higher fuel efficiency and reduces heat losses.
*
Circumferential chain drive offers smooth and power efficient dryer drive with less torque and wear on gearbox.
*
Drive system of fluid coupling with gearbox ensures easy restart of dryer unit in fully loaded condition.
*
Sweep rotor ensures smooth and uniform discharge of mix.
*
Multi cone dust collector with dust out late screw and fines re-feeding arrangement.
*
SHR (Super Heat Resistive – 210°C) grade conveyor belt of joint less molding provided in mix discharge (load out) conveyor offers longer life for handling mix asphalt.
*
Bigger capacity discharge hopper reduces segregation level in charging mix asphalt in to the dumper/tipper for canal, road and runways use.

Moon Engineering Works Pvt. Ltd.
14-A, Changodar Industrial Estate,
Sarkhej-Bavla N. H. Road, Changodar-382 210. Tal.-Sanand, Dist.-Ahmedabad. Gujarat, INDIA.

Phone

+91-2717-654019

Telefax

+91-2717-250043

E-mail
contact@moonroadequipments.com

Application Spray Bar
Bitumen , Tack coat / Emulsion Spraying. 2.5 mtrs. to 4.2 mtrs.
Pneumatic Operated.
Spraying Pressure 0 to 6 Kg./ Cm2.
Engine Digital Electronic speed tachometer
25 HP Air cooled diesel engine
Compressor Electronic & manual temperature indicator
Elgi / Ingersol- Rand
Bitumen Pump Moisture separator for clean & dry air
Positive Displacement
Pneumatic
Reputed Make

As the world advances towards unprecedented development in every sphere of life, industry and trade increasingly adopt new technologies, engineering skills and innovation to transform areas such as road construction and transport to enable transfer of goods, machinery, and passengers to destinations with safety and minimal damage.

Construction of roads, highways, bridges, and subways have undergone a sea change in the last decade. The overwhelming need for developing land transport over new routes and making them resistant to disintegration owing to climatic and geological factors has highlighted the importance of using enduring materials and technology.

Dhruvi Road Equipment (P) Ltd. has endeavoured to fulfill those technological parameters that govern the latest procedures and methods in manufacturing road construction machinery.
Technology & Infrastructure
“Problems are opportunities in work clothes.” is a popular management maxim. Aiming towards higher standards, Dhruvi Road Equipment (P) Ltd. is thankful for the norms set by the Ministry of Surface Transport. It allows the Company the opportunity to devise path-breaking innovations and meet and even exceed those standards.

The Company has over 15 years of record of accomplishment and experience in road building, including laying tarmac and highways that compare with the finest in the world.

Our plant is located on National Highway No.11, close to the vibrant metropolis of Mehsana, the commercial hub of Gujarat. Here we manufacture standard as well as custom equipment made from quality metals, mainly high-grade corrosion-resistant steel.
Quality Consciousness & HRD
We test each part for wear and tear, corrosion and impact resistance.

Our team of highly qualified engineers and metallurgists determine the feasibility and workability of standard as well as custom specifications in configuring the machine before putting it together.

The Company cheerfully fulfills the limited guarantees on certain sections and parts of the machinery in pursuance of its motto of considering the clients’ needs as paramount priority.

In the last eight years of aggressive marketing, clients all over India, who gratefully acknowledge the Company’s technical excellence and spare parts’ support have besieged Dhruvi Road Equipment (P) Ltd. with appreciative feedback.

The Company’s next step is predictable-the coveted ISO 9002 Certification. All efforts in procedure and manufacturing excellence including HRD measures are going on in full swing by motivating the team to work smart, and with unabated enthusiasm.

With high ideals, superior work ethics, tangible rewards rather than promises, and a fierce competitive spirit, the Company expects to go a long way in ensuring a deep market niche for Dhruvi Road Equipment (P) Ltd.

Dhruvi Road Equipment (P) Ltd.
240, G.I.D.C. – II, Dediyasan,
Mehsana-384 002,
Gujarat, INDIA.

+91-2762-224346
+91-2762-241127

Description of Self-propelled Chip Spreader
Our self-propelled chip spreader, a kind of road construction machinery, is widely used for continuously spreading aggregate in the work of bituminous pavement construction and maintenance.

Features of Self-propelled Chip Spreader
1). The roller speed and spreading speed are proportionally controlled.
2). The belt speed and spreading speed are controlled proportionally for easy and continuous spreading.
3). Auger speed and roller speed is synchronized, in favor of conveying material and preventing unmixing.
4). During continuous spreading, easy connection and disconnection between spreader and dumper truck are available due to the self-locking traction hook.
5)Two independent braking systems to improve the safety of traveling

Technical Specification of Self-propelled Chip Spreader
Spreading Width 250-4000mm
Spreading Speed 2.5-3.6km/h
Max. Running Speed 23 km/h
Spreading Rate 2-30 m3/km2
Aggregate Size 3-40mm
Engine Water-cooled diesel engine
Model WD615.50
Power rating:206kw
Rated speed :2200 r/min

Sinoway Industrial (Shanghai) Co., Ltd.

Add.: 26 Floor, China Development Bank Tower, No.500 South Pudong Road, Shanghai
Tel.: +86-21-68598616
Fax: +86-21-68887800
Post Code: 200120
Sales Enquiry:
Tel.: +86-21-68598617 (for Europe & Africa)
+86-21-68598130 (for Asia & America) +86-21-68598095 (for Russia) Email: info@chinasinoway.com

Tashkent Representative Office

Add: Mustakillik 68 A, Tashkent, Republic of Uzbekistan
Tel: 00998 (71) 237 3672
Fax: 00998 (71) 237 3809
Mobile: 00998 (97) 476 0070
Email: sinoway.tsh@gmail.com

‘MAXMECH’ Slipform Kerbing Machine Model : MSK 9145 is a most versatile machine for making different types of kerb for highways, footpath upto 1220mm width & 150mm thk. small box gutters, etc.

The concrete for pouring into the mould should be of special mix design & should have slump of approx. 30 to 40mm for small section & 25 to 30mm for higher section.

The machine is basically self-propelled driven by a compact water cooled diesel engine, having a Rubber Padded Crawler track, of 910c/c & 240mm width at front driven by a powerful hydraulic motor with gear box.

Technical Specification

At rear there are 4 idle solid tyres rubber wheels 2 on each side mounted equalizer beam. Complete machine is mounted on three hydraulic jacks, one at front & two at rear. The front portion carries crawler track and can also be steered by a horizontal hydraulic cylinder. The rear portion carries engine with rubber wheels one left hand side of the machine the mould box is suspended from the rear portion with receiving hopper for concrete. Two or three hydraulic needle vibrators are fixed inside the receiving hopper for consolidation of concrete before entering the mould chamber. The mould chamber is closed at front end & open at rear end with approx. length of 1500mm and with proper design so that on the machine propel in forward direction the concrete kerb is formed smoothly in slipform manner.

Two electronic sensors are fitted on side of mould box, the front one is for steering & second rear one is for grade. The machine follows the stringline which is laid & pre landed by theodolite along the length of the kerbing line slope sensor is fitted on the control panel at the centre of the machine.

The mould is of quick fit design & can be changed within 30 minutes max.

Head Office : 7611, G.I.D.C. Estate,
Phase – IV, Vatva,
Ahmedabad-382 445.
Gujarat (INDIA).

Telefax : 0091-79-25841143
25840930

E-mail : info@maxmechgroup.net
Contact us: 0091-79-25841143,
0091-79-25840930

Sensor Paver Finisher
We manufacture an advanced range of paver finisher fitted with imported critical components. These paver finishers are perfect for construction of Highways, Airport, Motorways, Main Roads, Rural roads etc. Our range of sensor paver finishers are energy efficient compared to paver finishers of other brands available in the market. This results in substantial savings on account of running cost.

The Paver Finishers from Everest Road Equipments comes with the following components as standard fitments:
Control Panel
All controls are provided within the reach of the operator from a comfortable driving seat.

Engine
Kirloskar / Leyland / water cooled / air cooled diesel engine of adequate horse-power is provided with 12volts electrical starting system.

Transmission
Through a multiple clutch and a 4-Speed Gearbox to an auxiliary low, high & reverse Gearbox. Differential unit is provided with differential locking facility. Final drive is connected from the differential to the fields through roller chain and sprocket mechanism.

Hoppers
Hoppers have low dump clearance to handle all type of trucks. The wings can be raised or lowered hydraulically to give a smaller overall width for transportation. It also facilitates for self-cleaning action during feeding of the asphaltic concrete onto the conveyor.
Paver finishers are widely used for paving and laying the hot mix material on the constructed surface. The hot mix material from the paver truck is dumped into the hopper, which is further conveyed to the spreading screw by chain conveyor. The screws of the mechanical pavers function to spread the hot mix material equally along the paving width. Floating screeds are used to pave the hot mix material to the desired preset thickness.

Some of the features of Paver finishers are as follows:

* The engine of the paver is fitted with fuel injection pump, air compressor, alternator, battery, oil pressure, water, temperature gauges, ammeter, starter button key etc.
* Mounted on rear pneumatic tyres and solid sandwich rubber coated front wheels. There is power operated independent brakes for each wheel.
* Hydraulically foldable hoppers capable to receive the premix material. The floor of the hopper is constructed of abrasion resistant steel plate.
* Bar type chain conveyor is used to move the material from hopper to spreading screw (augers) and the volume of material moved is controlled by adjustable gates.
* Left hand & right hand spreading screws (augers) capable of evenly distributing the premix material.
* Equipped with fully floating hydraulically extendable screed provided with heating arrangement (optional feature) to enable the screed to be uniformly heated before the operation. Screed slides over the premix material, smoothens it out in preparation for rolling, and is adjustable to give a crown to the material.
* All the controls are provided within the easy reach of the operator with comfortable and adjustable seating arrangement.

Everest Road Equipments is a prominent manufacturer, supplier and exporter of Heavy Construction Machines and Road Construction Machines. For the past 10 years, we have successfully achieved front-ranking position by means of holistic approach to needs and problems of the road construction industry, and an earnest commitment to provide automation excellence in road making machines. Our equipment are fitted with imported critical components which guarantee ultimate performance, even under the most difficult working conditions. The broad range includes Hot Mix Plants, Wet Mix Plants, Sensor Paver Finishers, Mechanical Paver Finisher and Semi Hydrostatic Paver Finisher.

We believe in providing solutions to our customers and not mere products, but innovative construction solutions which we make are based on a solid foundation of research and expertise. Our energy efficient pavers are perfect for various construction projects like Highways, Airport, Motorways, Main Roads, Rural Roads, etc. All the equipment are optimized to provide operational excellence along with substantial savings on account of running cost. Multiple quality checks are performed which involves people from every department, to produce high quality machines that must deliver satisfactory performance. Computer-aided designing enables us to develop the most critical parts in such a way that they can withstand the severest of shocks and vibrations during operation. We have been awarded with ISO 9001 Certification for implementing well defined Quality Management System.

We are focused on producing road construction machines with up-to-date technology that can deliver productivity, return on investment and cost-effectiveness for today’s value-conscious customers. Ready availability of all the frequently needed spares along with quick service response have helped us to remain ahead of the competition. Our enthusiastic drive towards success continues with widespread network of business partners and distributors, who have enabled us to extend our reach to customers across the globe. Moreover, we consistently invest on our infrastructure and people to confront the most challenging projects the future.

Mr. K.C.Mittal
84/13, Road No 3 ,
Rohtak Road Udyog Nagar, Mundka
New Delhi – 110 041, Delhi (India)
Mobile : +(91)-9810367077
Telephone : +(91)-(11)-28344499
Fax : +(91)-(11)-28344200
E-mail : info@everestroadequipments.com
manish@everestroadequipments.com