Sponsored links

 

Saic-Hongyan New Kingkan 8×4 Dump Truck CQ3314HTG366

Dumper Trucks Comments Off

Saic Hongyan New Kingkan 8x4 Dump Truck CQ3314HTG366 photo dumper trucks

Description
Saic-Hongyan New Kingkan 8×4 Dump Truck CQ3314HTG366
NO. TECHNICAL SPECIFICATION
1 Model: CQ3314HTG366 8X4 Dump Truck
2 Cab: New Kingkan flat-roof cab, Air conditioner, Left-Hand drive
3 Drive: 6X 4
4 Total mass(kg): 31000
5 Curb weight(kg): 15070
6 Rated Payload(kg): 15800
7 Max Speed(km/h): 80
8 Max gradeability(%): 32
9 Overall Dimension(mm): 10285X 2500X 3510
10 Skip Dimension(mm): 7400X 2300X 1100 (18.7CBM)
11 Wheelbase(mm): 1800+3600+1350
12 Engine: Wp10.336 Euro III Emission Standard
13 Engine Output: 247KW (336HP)
14 Transmission: 12JSD180T
15 Number of steel plate spring (front/rear): Left14 right13/left14 right13/12
16 Frame: Outside width 865mm, longeron cross section 317X(8+8)mm
17 Tyre: 12.00R20
18 Oil Tank(L): 340L Aluminum-Magnesium Alloy

Contact
Chongqing Asia-China Automobile Sales Co., Ltd.
12-4, Building F, Yugao Square,
No. 27, Keyuan 3-Rd Street,
Jiulongpo District, Chongqing, China
City/Province: Chongqing/Chongqing
Country/Region: China
Zip/Postal Code: 400039
Telephone Number: 86-23-61601907
Fax Number: 86-23-68606619

Chetra T11

Other Machines Comments Off

Chetra T11 photo other machines earth moving machinery and equipment building industry and construction materialsQSB6.7-C197 V6, four-stroke, turbocharged and air-to-air aftercooled, liquid-cooled diesel engine manufactured by Cummins company.

* Cylinder bore and piston stroke — 102mm x 136.4mm
* Enginedisplacement — 6.7L
* Operating power — 132 kW (180 h.p.) at 2 000 rpm
* Max. torque — not lowerthan 938 Nm at 1300… 1500 rpm

Engine with “Quantum” system, comprising electronic fuel injection, diagnostic, engine protection and engine control systems. Oil cleaning system with full-flow filter. Liquid-oil heat exchanger for engine oil cooling. Charge air and engine coolant are cooled by radiators installed in the radiators block. Liquid-oil heat exchanger for transmission oil cooling is installed on the tractor frame below radiators block. Engine heat control is performed by thermostat and fan with electromagnetic clutch drive manufactured by Horton company with automat

“CHETRA – Industrial Machinery”JSC

is a specialized Trade and Service Company solely representing interests of “Tractor Plants” Concern’s enterprises in marketing and servicing of industrial and forestry tractors, as well as of track-type cross-country vehicles and equipment for repair of oil- and –gas pipelines, an exclusive seller of products of “Promtractor” JSC, “Onezhsk tractor plant” JSC, “Kurganmashzavod”JSC, “Kraslesmash” JSC, “TK VGTZ”JSC and Silvatec A/S.

Strategic target of a stable company is to make advanced technologies in the world maximum available. “CHETRA – Industrial Machinery”JSC copes with this task. It opens and demonstrates new possibilities of machinery not only in Russia but also in abroad and is ready to bear responsibility for its trade mark.

The company collaborates with enterprises of oil and gas, coal, mining and gold-mining industries, road building, power engineering, communications and forestry. It carries out after-sales services of machines in guarantee and after guarantee period. The main priority in company’s activities is long- term cooperation and in business relations we appreciate mutual confidence of partners and responsible approach. Strategic partners: “Gasprom” , “Rosneft”, “Russian railways”, “Stroitransgas”, Severalmaz”, “Rusal”, “Titan”, “Surgutneftegas”, “Alrosa”, Punj LLoyd”, “Relines”, “Essar” and others.

Pipelayers, bulldozers, loaders are in demand with oil and gas, coal, mining and gold-mining industries, road construction and on rail roads. The CHETRA T11, CHETRA T15, CHETRA T20 and CHETRA T25 dozer models have certificates of conformity to the EU directives issued by the TÃœV Rheinland InterCert international organization.

Cross-country vehicles and equipment designed for oil pipeline repair (including insulation skinning, pipe body heating, preparation of insulating materials) being manufactured by Kurganmashzavod JSC. have given a good account of themselves in the North conditions. Operators note with satisfaction that they are reliable and easy to maintain.

We also have offers for forestry: novelty of Danish Silvatec Company – multifunctional harvester Sleipner. The harvester harmoniously combines a price, quality, high efficiency, reliability, low costs of services. Silvatec Sleipner harvester can be operated not only on plain but also on steep slopes, on marshlands not only when it is frosty but also under temperature differences, what is very important under Russian topographical conditions and climate.

A very important particularity of a company is a wide service network all over Russia, in CIS countries, India and Syria. “CHETRA-Industrial machinery” JSC offers not only high efficient machinery but also a wide range of services, beginning from delivery of spare parts, training of operators and finishing with building up of a spare parts and equipment store for providing of guarantee and after guarantee services and machinery repair. The company has direct contacts with End Users of the machinery.

The customer and his demands come in first with respect to business relations of the company. Not only the market but also the company policy dictates to improve quality and level of service orienting to a greater extent just to the customer. The mission of CHETRA brand is to turn the activity of its customers and partners into the most efficient business with lower costs. After purchasing necessary equipment the customer becomes a participant of so called “closed-cycle service” that means a complete equipment support during the whole guarantee period. And during after guarantee period the company is always ready to render assistance in any of its service centers. Such program allows the customer to save on service and spare parts costs significantly. And optimized maintenance schedule as well as availability of spare parts at company depots give the customer time advantages.

The company is open for different kinds of cooperation in other market segments and ready to expand the field of its activity. CHETRA – Industrial Machinery JSC. is attractive to manufacturers interested in promotion of their equipment. Giving CHETRA – Industrial Machinery JSC. the status of an official representative, manufacturers guarantee their customers that after preselling the equipment of high quality will be delivered in due time.

101, pr.Tractorostroiteley, Cheboksary, 428028, Russia.

Machinery Sales Department
+7-8352-304007
exports@tplants.com

Press-centre
+7-8352-30-40-32
presscenter@chetra.ru

Komatsu Crawler Dozers

Other Machines Comments Off

Komatsu Crawler Dozers photo other machines earth moving machinery and equipment building industry and construction materialsMachines belonging to this category are otherwise called a bulldozer, which pushes earth and rocks with a blade installed at the machine’s front end. Large- sized crawler dozers normally have a set of claws called a ripper that is installed at the machine’s rear end and can crush a hard rock. Swamp bulldozers are equipped with an undercarriage that is configured to enable them to freely move around on a marshy land. As a fellow machine, there is a pipe- laying machine that lays down a large steel pipe in the construction of a pipeline and a dozer shovel (crawler loader) for loading.

• Available models may vary by region or country. Please contact your local distributor for the most suitable specifications in your area.
• Product specifications are subject to change without notice.

Company Name Komatsu Ltd.
Established May 13, 1921
Head Office 2-3-6, Akasaka, Minato-ku, Tokyo 107-8414, Japan
President and
Chief Executive Officer Kunio Noji
Main Businesses Manufacture and sale of construction and mining equipment, utilities, forest machines and industrial machinery.
Common Stock Consolidated 67,870 million yen
Non-Consolidated 70,120 million yen
Total Number of Shares Issued and Outstanding   998,744,060 shares
Number of Shareholders   267,505
Net Sales
(For Fiscal Year ended March 31, 2010) Consolidated 1,431,564 million yen

Non-Consolidated 457,676 million yen

E.M.B
12, rue du Cap Vert
21800 QUETIGNY
France
Tél : 33.(0)3.80.32.03.02 / Fax : 33.(0)3.80.32.03.09

Bulldozer [SD6G]

Other Machines Comments Off

Bulldozer  [SD6G] photo other machines earth moving machinery and equipment building industry and construction materialsSpecification:
Type of blade: tilting straight blade
Operating weight: 16, 100kg
Maximum draw bar pull: 145kN
Ground pressure: 55kPa
Width of standard shoe: 1, 880mm
Ground clearance: 445mm
Grade ability: straight 30°/side: 25˚
Capacity of blade: 4.5m
Dimension of blade: 3, 297 x 1, 170mm
Digging depth: 592mm
Overall dimension: 5, 037 x 3, 270 x 3, 077mm
Engine: C6121ZG05
Type: water cooled, single row, vertical, 4 strokes cycle, turbocharged
Manufacturer: shanghai diesel engine company
Rated RPM:: 1900r/min
Rated power: 131kW
Number of cylinder-bore x stroke: 6 – 121mm x 152mm
Fuel consumption: 215g/kWh
Maximum torque: 770Nm/1400rpm
Type: swing type of sprayed beam. Suspended
Structure of equalizer bar
Number of track rollers (each side): 7
Number of carrier rollers (each side): 2
Pitch: 203mm
Width of shoe: 560mm
Gear (forward/reverse):
1 st: 4 km/h, 4.8 km/h
2 st: 6.9km/h, 8.4 km/h
3 st: 10.9km/h, 12.9 km/h

CNBM Group Corporation
China National Building Material Group Corporation (CNBM) is a state-owned enterprise in charge of administrative affairs in building material industry. It was incorporated in 1984 upon the approval from the State Council and is a holding company. It is one of the 191 large-scale groups under the administration of the State-owned Assets Supervision and Administration Commission of the State Council.

The business scope of CNBM covers from the design, manufacturing and sales of new building materials, chemical building materials, cement, composite materials, glass, etc. to the distribution of building materials, scientific research and design, real estate development, import and export trade, consulting service, etc. And in many of these fields, CNBM is playing the leading role.

CNBM has a total assets of 20 billion RMB yuan; a staff of 30 thousands; 200 affiliated companies; four publicly listed companies in which CNBM has a controlling percentage of shares; 11 publicly listed companies in which CNBM has a substantial percentage of shares.

After the 20 years’s development, CNBM has grown into the backbone enterprise and plays the leading role in the building material industry. For many consecutive years, CNBM is among the top 500 Chinese companies.

No.2 Zizhuyuan South Road Haidian District Beijing P.R.C.
ZIP100048
TEL 86-10-68731147 FAX 86-10-68422743
EMAIL icd@cnbm.com.cn

TIPPER TRAILER – HARDOX – DUMP TRAILER

Other Machines Comments Off

TIPPER TRAILER   HARDOX   DUMP TRAILER photo other machines earth moving machinery and equipment building industry and construction materialsDimensions
Type : HPD-15002
Volume : 22 26 m�
Height : 1.400 mm
Width : 2.350 mm
Lenght : 7.800 mm
Empty Weight : 5.600 7.000 Kg

Chassis:
High resistant cut chassis welded on automatic mould with gas welding method

Chassis Accessories:
King Pin with 2 (50,8 mm) diameter under SAE and DIN standards, can be dismantled and assembled from lower part
Trailer supports each with double sped, 25 tons dynamic, 50 tons static load capacity
Folding rear bumper in conformity with EEC 97/19 directives having E certificate 1 unit of spare tire carrier
Complete mudguard from hard plastic intergrated with 4 spats and 1/2 mudguard holder
Conveyor Group:
3 unit of axle lifting front axle each with 9 tons capacity ( Local axle or optional BPW axle)
Z spring with Air suspensions system
385/65 R 22.5 Tire 6+1 , 11.75 x 22.5 Rim 6+1
Brake System:
Double circuit pneumatic brake, 4S2M sensor, ABS system, automatic brake ratchets, securitybrake system with EEC 97/12 standards ( Optional EBS brake system)
Electrical Equipment:
Turkey and Europen Union (EU) Standarts, 24 V. – 2 Units stop lamp which has 7 functions, 2 Units plate illumination lamp, Side horizontal caution lamp, Velocity plates, Reflectors,
Hydraulic Lift:
5 Graded mono front cylinder
Paint:
Prior to dyeing cleaning with sanding method, prior to dyeing cleaning with special chemical mixture, two layers of epoxy coat, last layer is applied two layers of furnace dyeing as to requested color.
Standard Accessories:
1 unit whel wedge 1 unit spare tir unit tool box 1 unit water tank 1 unit plastic fire toreduce tube box

NEVKARSAN TRAILER MANUFACTURING COMPANY LTD
Our company has been established in 1983, in Nevsehir Industrial Zone in order to manufacture on board equipment, semi-trailers and trailers for automotive sector. Since establishment Our main goal is to get quality and technology accordingly world standards with the customer satisfaction which is in fact our priority.

Main Factory
Ozel Organize Sanayi Bolgesi 12.Blok No:1-2
NEVSEHIR / TURKEY
Phone: +90.384.242 91 00
Fax: +90.384.242 90 30

Branch Factory – Service – Export Office
Ankara Asfalti Pendik Tersane Girisi No:3
Alt Kaynarca Pendik / ISTANBUL / TURKEY
Phone: +90.216.494 27 47
Fax: +90.216.494 27 46

Nevkarsan Service
Lale Sanayi Sitesi 14.Blok No:1-2
NEVSEHIR / TURKEY
Phone: +90.384.212 21 22
Fax: +90.384.214 10 79

Sudan Office
Africa Road Amarat Street 41 Floor 4 Flat
Khartoum / SUDAN
Phone: 00 249 183 59 17 21 ( 22 – 23 )
Fax: 00 249 183 59 17 24

Golden King Tractor Truck

Other Machines Comments Off

 Golden King Tractor Truck photo other machines earth moving machinery and equipment building industry and construction materialsBrand Name Golden King Tractor Truck 6*4 Series
Item No ZZ4251M3241V
Technical Parameters Engine Model: WD615.87, EURO emission standard(Option: Euro)
Diesel: 4-stoke direct injection diesel engine
6-cylinder in-line with water colling, turbo-charging and intercooling
Maximum output: 290HP(213kw)at 2200rpm
Maximum torque: 1160Nm at 1100-1600rpm
Specific fuel consumption: 195g/kwh
Engine oilfilling quantity: 23L
Rigid fan cold start with electro-heater

Clutch

Single-pate dry coil-spring clutch, diameter 420mm, hydraulically operating with air assistance Transmission
Clutch Molde HW18709, synchromesh, 9forward&reverse
Transmission Ratio: 12.68/8.46/6.26/4.64/3.38/2.5/1.85/1.35/1.00/11.36R
Option: HW18710
Properller Shaft Double universal joint propeller shaft with gear-shaped coupling flange
Front Axle Steering with double T-cross section beam
Rear Axle Ratio: 12.68/8.46/6.26/4.64/3.38/2.5/1.85/1.35/1.00/11.36R
Profile paraller ladder frame with section of 300*80*8mm and reinforced subframe, all cold reveted cross members
Frame 10-semi-elliptic leaf springs with hydraulic telescopic double action shock absor bers and stabilezer

Font suspension

9 semi-elliptic springs with bogie springs and stabilizer
Alumimum fuel tanks 400L capacity with locking fuel cap, fitted to the off side of the chassis
Spare wheel Steering ZF8098, hydraulic steering with power assistance
Ratio: 20.2-26.2
Service brake dual circuit compressed air brake

Brake

Parlking brake(emergency brake): Spring enerpressed air operating on rear wheels
Auxiliary brake: Engine exhuaust valve brake
Option ABS
Rims: 8.5-20, 10hole-steel
Wheel&Tyres Tyres: 12.00-20
Option: 12.00R20
Active check central controller with indicators, with this integral instrument the daily manual checks on the vehicle and combined indicators of compressed air pressure, coolant temperature, engine oil presssure and battery charging
Dimensions (mm) Wheel base 3150+1350
Front wheel track 2047
Rear wheel track 1820
Front overhang 1320
Fear overhang 750
Approach angle(° ) 20.5
Departure angle(° ) 48
Overall length 6520
Overall width 2490
Overall heght 3870
Weight (kg) Permissible loading capacity 16300
Gross dead weight 8570
Gross vehicle weight 25000
Front axle loading capacity 6500
Rear axle loading capacity 2*13000
Performance Maximum driving speed(km/h) 93
Maximum gradeability(%) 42
Maximum ground chearance(mm) 314
Maximum turning circle(m{ 12
Fuel consumption(1/100km)32 30

Guangzhou Chang Sheng Yong Da Trading Co., Ltd had been established in 2001, is a share holding enterprise which a trade and the production unifies. Has 80 persons engaged in a sales and the service team of professionals; Has become the exclusive supplier in guangdong in the short 7years. Has five accessorries factories, such as Guangdong, Guangxi, Shangdong, Zhejiang and so on.

The company installs boldly to the hydraulic system from the chassis to on adopts sell; Outright the management the pattern Cause the products costs to a minimum; Let the Customers in the product same level performance situation the product which needs by the lowest cost purchase. At present the product has succeeded sells to places such as Guangdong, Guangxi, Hunan, Jiangxi, Fujian, Sichuan and so on.

Our goal:
The most complete product suppliers mixers;
The most Competitive price suppliers mixers;
To be the supplier who the domestic special-purpose vehicles sale most has the strengtn;
To do omni-directionally for the customer investment efficiency consideration agitation vehicle supplier

Company Name: Guangzhou Changsheng Yongda Trading Co., Ltd
Company Address: No. 803, Jinzhong Building, 695-697 Baiyun Dadao South Road, Baiyun District, Guangzhou, Guangdong, China
City/Province: Guangzhou/Guangdong
Country/Region: China
Zip/Postal Code: 510405
Telephone Number: 86-20-86194816
Fax Number: 86-20-86183985
Contact Person: Mr. Jack Zhang
Position: Manager
Department: Intermational Dept.
Mobile: +86-15802022568

RDS – Dumper D 40

Dumper Trucks Comments Off

RDS   Dumper D 40 photo dumper trucksThe D 40 was the first of the middle-size models, a totally new dumper which derives from the DB 180 concrete mixer, to which it owes its 48 horsepower Yanmar engine and 4-speed transmission. Its articulated steering, its ability to unload on three sides plus the reversible driving position make it an extremely versatile vehicle, unbeatable in restricted spaces such as narrow city-centre lanes, passageways or tunnels.

The D 70 currently represents the latest development in the firm’s quest to renew their dumper range. However, Fiori does not exclude the possibility that other models may shortly come on line, further adding to the company’s product offering. No secrets have so far been revealed, so all we can do for the time being is wait. Given Fiori’s tendency to get things right ahead of the competition, watch this space for news of future trends in the dumper market.

The combination of performance features such as 4-wheel drive and steering, rotating driver’s seat, 4-speed hydrostatic transmission, maximum speed fully-loaded of 30 k.p.h., optimal visibility and compactness considerably increase this vehicle’s versatility, even if tunnel work seems to be their natural habitat.

This is the evolution of the by now tested ABX series; the driving section has completely been redesigned replacing the mechanical gearbox with an electrohydraulically-controlled two-speed hydrostatic transmission.

Ideally, the dumper is used to transport and distribute materials on building sites and road works. Thanks to the four-wheel drive hydrostatic transmission, it has gained in handling performance and agility covering the essential role of machine to serve building sites.
This model has been developed in 4 versions:

RT trilateral unloading – RF front unloading (also in the more compact SLIM version) – AC self-loading – PX with shovel-type loading. It epitomizes the best of Fiori technology in the field of hydrostatics and comfort on the compact machines without neglecting handling and operator safety.

1000 l flush steel box for 2.5 ton capacity, central heavy duty articulation, epicycloïdal reduction gears with internal oil-bath brakes, two-speed hydrostatic transmission and low noise are the main features that distinguish it from the other machines in its category. High reliability and constant safety in all fields of use, on any terrain and in any conditions, as well as the assurance of dealing with a Group that for more than 60 years has been at the service of building sites and its customers.

Fiori is a company at the service of building sites and is capable of finding the most effective solution for any enterprise. To achieve this objective, we not only use our products, but also everything else that contributes to making up a product and a service (technological innovation, dynamic environment, relationships with suppliers, integrated production process, technological production, listening to the customers, after-sales and technical services, awareness). Our efforts are not only aimed at selling our products, but together with our customers we want to produce systems capable of offering alternative solutions to the problems that arise every day on building sites and in the workplace. Listening to our customers for us is and remains of prime importance in order to find the specialist solutions most suited to each specific case.

With our open, dynamic and competitive character, we are young at heart and willing to listen and respond to everything that is happening outside the company, so that we can give our customers that added value and that specialisation they are looking for in a product. Whether in Italy or in a faraway country, we always give our customers the attention they deserve: explanations, offers, clarifications, suggestions, assistance and trust. Extremely high human value and technological innovation steer Fiori towards challenging an ever more competitive market, offering systems to satisfy the customers’ every need.

Fiori has been present on Indian soil since 1992 in a joint-venture with Ajax-Fiori for construction of concrete mixers, dumpers and concrete mixing stations.

FIORI S.p.A.
Via per Ferrara n¡7,
41034 Finale Emilia (Mo) – Italia
Tel. +39 0535 92357
Fax +39 0535 90960

Dongfeng Dump Truck

Dumper Trucks Comments Off

Dongfeng Dump Truck photo dumper trucksTRUCK CHASSIS
Cabin Driving type 6×4 LHD
Dong Feng Standard cab, with two bunk, one bed as attached photo for ref.
Vehicle Main Dimensions Overall dimensions (L x W x H)mm 7950x2500x3400
Wheel base (mm) 3800+1350ã
Wheel track (front/rear) (mm) 2070/1820
Approach/Departure angle 30/28
Weight in KGS Tare Weight 12270
Loading Capacity: 25700
Front axles loading capacity : 8000
Rear axles loading capacity : 2×13000
Max. driving speed (km/h)102
Engine : Brand Cummins
Model: C300
Type : 4-stroke direct injection , 6-cylinder in-line with water cooling, turbo-charging and inter-cooling

Horse Power (HP)/(RPM) 300HP @ 2200RPM
Max. Torque (RPM) 1200-1400PRM
Emission standard: Euro
Gearbox RT-11509C, 8 forward & 1 reverse
Clutch: Reinforced diaphragm clutch, diameter 430mm
Steering Gear: power steering, hydraulic steering with power assitance
Fuel tank (L) 400
Tire
BODY
Dump body
Dimension Lx W x H 5200x2300x1250
Thickness Floor
Side 6mm
Front 8mm
Door 6mm
Hydraulics Tipping Type Front Lifting with HYVA piston
Working Pressure 190 bar
Sustaining tipping weight 50, 000KGS
HUBEI HUAWEI SPECIAL-PURPOSE AUTOMOBILE MANUFACTURING CO, .LTD. is among the top 5 suppliers of all kinds of trailers and trucks in China, our products cover from container trailers, fuel tankers,
semi trailer, sanitation truck, dump truck and other special purpose vehicles etc. With a factory area over 45, 000 square meters
and over 1, 000 experienced workers, the factory production capacity is over 10, 000units per year. I believe we can suit your need with our diversified products and good quality.

Hubei Hua-Win Special Vehicle Manufacturing Co., Ltd

Dump Trucks [Howo Dump Truck]

Dumper Trucks Comments Off

Dump Trucks  [Howo Dump Truck] photo dumper trucksHOWO heavy duty truck–the most advanced and most superior new generation of heavy duty truck in China, with proprietary brand and intellectual property right, was developed by CNHTC by applying the world advanced heavy duty truck key technology aiming at the market at home and area markets overseas.

The arrangement of the complete vehicle is perfect; the main assemblies are harmonious, unified and reliable, which makes the complete vehicle have better performance on power, economical efficiency, reliability and environmental protection.
HOWO series is comprehensive with Euro2 and Euro3 engine equipped.
Product range: Semi-trailer towing vehicle, goods vehicle, tipper, concrete mixing carrier and other special truck refitted on its chassis.
Driving type: 42, 62, 64, 84 etc.
Power range: 266PS – 410PS.

Models and specifications:
Model
Vehicle Type
Driving
Type
Engine
P(kW)
Wheel Base
(mm)
GVW
(kg)
Cab
Emission
Chassis
ID
ZZ3167M3811
Tipper & chassis
42
WD615.62
WD615.87
196
213
3800
16000
HW70
Euro2
1213847
ZZ3167M4611
Tipper & chassis
42
WD615.62
WD615.87
196
213
4600
16000
HW70
Euro2
1213860

ZZ3257M2941
Tipper & chassis
64
WD615.62
WD615.87
196
213
2925+1350
25000
HW70
Euro2
1214081

ZZ3257M3241
Tipper & chassis
64
WD615.62
WD615.87
196
213
3225+1350
25000
HW70
Euro2
1213952

ZZ3257M3247W
Tipper & chassis
HW76
Euro2
1218746

ZZ3257M3641
Tipper & chassis
64
WD615.62
WD615.87
196
213
3625+1350
25000
HW70
Euro2
1214058

ZZ3257M3647W
Tipper & chassis
HW76
Euro2
1218070

ZZ3257M3841
Tipper & chassis
64
WD615.62
WD615.87
196
213
3825+1350
25000
HW70
Euro2
1213969

ZZ3257M3847W
Tipper & chassis
HW76
Euro2
1218023

ZZ3257M4147W
Tipp

Beijing Newco International Co., Ltd

Dump Truck / Tipper

Dumper Trucks Comments Off

 Dump Truck / Tipper photo dumper trucksPacking: packed in nude
Standard: Euro II and Euro III Emission
Productivity: 100, 000 units per year
Unit Price/Payment: L/C, T/T
Trademark: SINOTRUK
Origin: China
Min. Order: 1 Set
Transportation: by sea
Tire Certification: ISO
Tire Type: Inner Tube
Tire Design: Bias
Condition: New
Truck Type: Dump Truck
Emission Standard: Euro 3
Transmission Type: Manual
Seats: <=5
Power: Diesel

HOWO Dump truck
Driving type:6×4
Engine max. output (hp):266/290(Euro II or III Emission)
Dumping box Inside Dimension (L×W×H) (mm):5800×2300×1500
Model Dump Truck ZZ3257M3847W
Driving Type
6×4

Engine max. output (hp)
266/290 ( Euro II or Euro III Emission )

Outside Dimension (L×W×H) (mm)
8545×2496×3368

Max. Total Mass (kg)
25000

Dumping box Inside Dimension (L×W×H) (mm)
5800×2300×1500

Thickness of bottom plate/side plate(mm)
8/6

Wheel Base (mm)
3825+1350

Approach/Departure angle (°)
19/23

Max. Speed (km/h)
75

Front/Rear overhang (mm)
1500/1870

Clutch
Single-plate dry coil-spring clutch , diameter 420mm , hydraulically operating with air assistance

Transmission
FULLER

Steering
ZF

Front Axle
HOWO axle

Cabin
HOWO cab(with air conditioner)

Rear Suspension
Leaf springs

Dalian Longseen Truck Commercial Co., Ltd. (China), authorized as the 4S company of China National Heavy Duty Truck Group Co., Ltd. (CNHTC), is the largest distributor in the Northeast of China. And it mainly deals with the trucks, especially all kinds of special trucks, and spare parts of HOWO and STEYR series that are manufactured by CNHTC.

Meanwhile, there are professional engineers for after-sale service and technology supporting. The company is located in the Chinese romantic coastal city_Dalian which is the modern international shipping center and exportation base in the Northeast Asia for its ideal location. It is convenient to communicate and negotiate with traders home and abroad, that is the reason for CNHTC to set up the company in Dalian. As a company specializing in managing heavy duty trucks, we can provide qualified products and perfect service. Satisfying you is our endless pursuit.

Main products: All-wheel drive vehicle series, Terminal tractor series, Log carrier series, Concrete mixer trucks, Refuse compactors, Water trucks, Fuel tank trucks, Bulk powder trucks, Insulation trucks, Dump trucks, Tractor trucks, Cargo trucks, etc.

Company Name: Dalian Longseen Truck Commercial Co., Ltd.
Company Address: 128 Huadong Road, Ganjingzi District, Dalian, Liaoning, China
City/Province: Dalian/Liaoning
Country/Region: China
Zip/Postal Code: 116031
Telephone Number: 86-411-86532738,86525989
Fax Number: 86-411-86525989
Contact Person: Ms. Lindy Xu

Sponsored links