Surface Finishing Screed FCT-WG
Simple Pperation and Low Maintenance Design
SCREED, powered by 4 strike gasoline engine, provides uniform vibration over the entire blade length and
Enhances concrete compaction, makes it possible to level up to 4 times more concrete than the traditional
Method, and do it more accurately.
1. Specially design, hardened aluminum blade ensuring a smoother finish than conventional screeds
2. Heavy rubber mounts to reduce the vibration level on the handle
3. Aadjustable handle in height, vertical and horizontal position(optional)
4. The rounded ends of the blade make it easy to go around obstacles
5. The tilt-up stand keeps the engine out of concrete or off the ground when not in use
6. One piece casting body easy connect to engine
7. Emergency stop switch available
8. Different working widths: 4ft/1.2m 6ft/1.8m 8ft/2.4m 10ft/3.0m 12ft/3.7m 14ft/4.3m 16ft/4.9m
9. Easily changed blades

Technical specification
Without blades
WG and WG-1 are with adjustable handle.

Weigh of Blades
The total weight of the machine should be the weight of engines assembly plus weight of blades.
Model

FCT-WG

FCT-WG-1

Engine

Air-cooled.2-cycle

Air-cooled.4-cycle

Engine type

Chinese Petrol engine

Petrol Honda GX35

Power kw(hp)

1.4(1.9)

1.1(1.5)

Weight kg(lbs)

12.7(28.0)

12.7(28.0)

Blade Size m(ft)

1.22(4)

1.8(6.0)

2.44(8.0)

3.0(10)

3.66(12.0)

4.47(14)

4.88(16)

Weight kg(lbs)

2.9(6.4)

4.36(9.6)

5.81(12.8)

7.27(16)

8.72(19.2)

10.16(22.4)

11.61(25.6)

Zhejiang Focatt Industry Co.,LtdGo to Company Website

Address :
Wenyi Road,Xihu district,Hangzhou City,Zhejiang Province,China Hangzhou Zhejiang
Phone :
86-571-88220621
Fax :
86-571-88164336
Contact :

Elaine Yu (Ms.)

Product Description
Simple Operation & Low Maintenance Design

SCREEDEASY, powered by petrol engine, provides uniform vibration over the entire blade length and enhances concrete compaction, makes it possible to level up to 4 times more concrete than the traditional method, and do it more accurately. Only weight approximately 12kg, it’s one of the lightest portable unit on the market.

Features
* Specially design, hardened aluminium blade ensuring a smoother finish than conventional screeds.
* Heavy rubber mounts to reduce the vibration level on the handle.
* Adjustable handle in height, vertical & horizontal position (optional)
* The rounded ends of the blade make it easy to go around obstacles
* The tilt-up stand keeps the engine out of concrete or off the ground obstacles
* One piece casting body easy connect to engine
* Emergency stop switch available
* 7 different working widths: 4ft/1.2m, 6ft/1.8m, 8ft/2.4m, 10ft/3.0m, 12ft/3.7m, 14ft/4. 5m, 16ft/4.9m
* Easily changed blades

MODEL WG
Engine Air-cooled,4-cycle,single cylinder
Engine type Petrol,Honda GX35
Power kw(hp) 1.1(1.5)
Weight kg(lbs) 12.7(28.0)

Derwen Construction Machine CO., LTDGo to Company Website

Membership Type :
Free member
Registration Date :
2007-09-13
Country/Region :
China China
Address :
Luoshe Town,Wuxi City Wuxi Jiangsu
Phone :
86-512-66022641
Fax :
86-512-65010564

SKARIFIER 203E The lightweight concrete and screed milling machine with integrated edger for concrete scarifying and removing of floor covering residues. Absolutely essential for effective and quick working results on small surfaces. An adjustable handle bar, the infinitely variable depth control and lifting grip makes it especially user friendly.

Special characteristic : – Adjustable handle – Large transport wheels – Integrated vacuum tube – Quick cuter change – Dust sealed drum bearing – Variable depth control
- Lifting grip – With integrated edger.

Model KARIFIER 203E
Volt 200-400 V / 50-60 Hz
Power 4000 W (5,4 HP) Gasoline Motor
Working width 200 mm (8”)
Work to the rim 45 mm (1 3/4”)
Working depth per pass 2.5 mm (1/10”)
Coverage per cutter set 2500 sqm (27000 sq/ft)
Performance per hour 30-45 sqm (300-470 sq/ft)
Drum speed 735 rpm
Drum rotation downcut
Weight 80 kg (176 LB)
Vac. Connection 50 mm (2”)

Klindex Srl
Via vallone, 16
65024 Manoppello (PE) Italy
Tel: (+39) 085 85 98 00
Fax: (+39) 085 85 99 224
P.iva 01194210686

Klindex-Italia
Call free with skype

The Manipav 2000 and 3000 are equipped with an auger which will remove approx 2-3 centimetres of the excessive concrete before the vibrator. The Manipav 3000 auger is possible to move in both left and right direction! This will decrease the amount of labour to even out the concrete before screeding!
A vibrator in front of the auger The Manipav 2000 and 3000 are equipped with a vibrator in front of the auger. This is an electrical vibrator which will perform with high frequency and create a smooth surface and vibrate the steel fibre down into the concrete!

The Manipav screed is a new concept for the flooring contractors and an alternative to both the larger and smaller laser screeding machines on the market today. Thanks to the auger attached in front of the vibrating beam, it has the same qualities and capacity as a large laser screed. The small size gives it the advantages of being easy to operate, easy access and requires less maintenance. It is easy to transport and you can set it up within 20 minutes from unloading.
You drive the Manipav in the concrete during pouring and thanks to the auger, the excessive concrete will be screeded off, thereby achieving a higher precision and flatter result for the floor. This method saves both labour costs and more machinery which you otherwise would have needed to even out the concrete before vibrating!
The Manipav screed can produce between 1000 m2 to 2000 m2 per day, depending which model and circum-stances such as planning, concrete supply, access to the slab and of course the operation of the machine.
The easiest and most efficient usage of the Manipav screed machines is when making floors with steel fibre reinforcement concrete on compacted soil. However the Manipav screed model 2000 (470 kg) is constructed for use on well spaced reinforcement mesh. As standard the machine is equipped with 6 wheels and has an option of 4 extra wheels could be installed in the front.
All Manipav screed machines are usable on deck slabs as long as the construction of the deck will allow the weight of the machines!

The Manipav 2000 has a foldable frame in the front of the machine so when it is transported the machine has only a width of 90 cm so it can easily be transported in a small pick cup or van. The Manipav 3000 is a larger and heavier machine so it should be transported on a trailer or bigger truck with an loading ramp.

ab lindec and ab lin-pro are a family business, with headquarters in Gothenburg, Sweden, specialising in high quality materials and machinery for production of concrete flooring.

ab lindec, founded in 1970 produces flooring materials with very high abrasion resistance, suitable for industries, warehouses, parking areas, stores, logistic centres etc. The production of dry shake toppings and other high resistance admixers is located in Denmark and all the liquid products are produced in Sweden.

ab lin-pro, founded in 1999, is the sole European distributor for Allen Engineering Concrete Equipment with the European warehouse in Gothenburg, Sweden.

ab lin-pro is also the producer of the Laser-Arm screeding and spreading machine as well as the distributor of Manipav screeding machine.

Today our products are marketed in about 30 countries through various channels such as dealers, agents, our own representing offices or directly to big specialist concrete contractors. At present our main markets are Scandinavia, Northern Europe, The Baltic States, Poland, Russia and the former CIS countries. However we strive continuously to establish new markets and are always interested in engaging new partners.

Our vision is to be the complete supplier, providing the concrete flooring specialist with everything necessary to produce high quality floors.

We began our business as flooring contractors and for many years we were Scandinavia’s leading company in this sphere. During this time we had the opportunity to use and test most of the materials and machinery on the market. By the time we moved on to concentrate solely on marketing materials and machinery, our choice of products was clear.

Thanks to this background we trust that we are well experienced and welcome you to us, to discuss our future business!

Utiform HD50 type operates at a constant speed with low fuel consumption and minimum noise generation. With a large-capacity compressor and an air output rate of 4.6 m3/min, this Trans Mix does not run out of steam easily, even when performing the most demanding tasks. At the same time, it is perfectly equipped and operation is controlled by a few simple hand movements. The mixer is activated at the touch of a button and the end of the pumping process, the mixing tank is ventilated automatically. The drawbar is adjusted to the correct height via a hand grip on the parallel adjustment device. The canopy and the drawbar are galvanised, thereby preventing rust and corrosion. Special paint is used for the frame. The wear plates in the mixing vessel are manufactured from steel that is extremely resistant to wear therefore guarantee a long service life. It goes without saying that the Trans Mix is an exemplary safe machine with a safety cut out, fitted to the vessel grill, canopy lock and emergency stop. Now fitted with central lifting eyes as standard