Tank : silo tank
Load capacity : 32500kg
Volume : 32m3
Suspension : spring/air
Location : Germany, Greven
Date enlisted : 23.10.09
Autoline ID : LN713
Gross weight – 37000kg, colour – metallic.
Axles: axles – 3, suspension – spring/air.
Brakes: ABS.
Registration number – 0951

Contacts Rickermann Gmbh:
+49(2575)3820
+49(2575)8504 (f)
send e-mail
www.rickermann.com
Germany,
Nordrhein-Westfalen
48268 Greven
Herberner Straße 35

EMSEY Silo / Tank Semi-Trailer
* Model: SB-50
* Internal volume: 33 m (50 Tons)
*ST-52 mono-block chassis,
* ST-42 steel body: 4 mm
* Tank Equipment:
- 8000 l/min compressor,
- 2 x Manhole tap for loading
- 4 discharging with 1200 lt/ min capacity by meaning of butterfly valve
- 2 x Pneumatic valve monometer, 4 bar
- 2 Air pipeline installation,
- Walking way on the top,
* 11 x collectors with double sided, located inside the silo,
* 6 mt cement tube (for discharging)
* Jet 11/11 additional cement discharging air,
* Exhaust valve
* Automatic safety ventile
* Extra air outlet valve for discharging a 2nd vehicle,
* Wabco ABS and EBS
* 6 pcs x 385/65R 22, 5 Wheels
* Parabolic Z scissor system axles
* 2 lays of epoxy primer coated tipper body after sand blasting and undercoating
* Color: RAL 7001 Grey
* 24 v Electricity installation.
* Included Accessories: Fenders – Tool box – Reflector – Stairs

EMSEY TRUCK BODY BUILDING and TRAILER Manufacturing Line:

* Truck Body Building
- Dump Truck (16 to 22 cbm)
- Concrete trans-mixer (9 to 12 cbm)
* Semi-Trailers:
- Dumper trailer (22 to 31 cbm),
- Semi Trailer Curtain side – Lowbed
- Silo / Tank trailer (Up to 33 qbm)
- Container chassis for 20′ and 40′

DFLZM Front 4 Rear 8 axles Powder Material transportation truck is available for carrying and pressurized discharging dry powder such as fly ash, bulk cement, lime, mineral powder, chemical fertilizer etc. which granule size not more then 0.1mm. The discharge height could reach 15m and convey for 5 meters horizontally. Moreover, the vehicle is widely applied in industry, agriculture, commerce section and architecture.
MAIN SPEC.:
ITEM MODEL&SPEC MANURACTURER
SPECIAL VEHICLE CLQ5311GFL CHENGLONGWEI
CHASSIS LZ1311MNT DFLZM
ENGINE YC6G255-20/YC6G285-20 YUCHAI DIESEL

CHASSIS TECHNIQUE PARAMETERS:
ITEM MODEL&SPEC ITEM MODEL&SPEC
Drive System 8*4 Exhaustion Standard GB17691-2001CN2,GB3847-1999
Emission(ml)/Power(km) 7800/188 7800/210 Tyre & Spare Tyre Spec. 10.00-20
Gross /Rated / Kerb Mass(kg) 31000/16500/14305 No. of Leaf Springs 6/7/10
DimensionL*W*H(mm) 11995/2495/3650 Front/Rear Suspension(mm) 1380/3065
Wheelbase(mm)/Axis No. 1700+4550+1300/4 Approach /Departure Angle 19/14
Front/Rear- Gearcase Front/Rear Truck(mm) 2020/1860
Cabin High Roof ,Double Dome Clutch
Steering-Gears Hydraulic Power Assistance Steering Brake System Dual-circuit, Exhaust/ Air-cut off Braking, Drum Brake,

VEHICLE MODIFCATION TECHNIQUE INFORMATION
ITEM MODEL&SPEC ITEM MODEL&SPEC
Cubagem3 25 Air Compressor 8m3
DimensionL*W*H(mm) 9400*2045 Manufacturer Qualification Measure up (CN standard)
Material Carbon Steel Painting Metallic Paint
Figure Round Steel Spare Parts & Accessories Maintenance Manual, Services Stations List, Introduction, Tools
Technique Index Working pressure 0.2Mpa discharge speed could reach 1.2—1.5t/min, remained ratio ≤2‰. In available condition discharge height could reach ≥25m.
Applied Function The vehicle container could be separated for carrying and storage different kind of powder stuff, with advanced characteristic of high efficiency unloading performance, low remnants ratio, safe and easy operation. Inner tanker is used bag-typed and Asterisk-shaped fluidized bed. Simple designed structure that easy for maintenance, good capability of vulcanization. Vehicle offered 8m3 , 9m3 , 10m3 air compressor for option, with direct drive shaft( strap drive and motor drive optional)

HUBEI CHUSHENG SPECIAL PURPOSE VEHICLE CO., LTD

Hubei Chusheng Special Purpose Vehicle Co., Ltd (hereinafter referred to as “CSC”), the state key truck manufacturer with R&D ability, acquired certification of Dangerous Chemicals Storing, Chemical Material Containing Appointed Enterprise , moreover, CSC had got Regulation of the People’s Republic of China for the Administration on Production License of Industrial Products ; ISO 9001 quality system certification and CCC certification. CSC registered capital of 110, 000, 000 Yuan, with 150, 000 square meters floor space and building area over 50, 000 sqm. Newly expanded joint tank plant, semi-trailer plant, tipper plant, all plants are equipped with high advanced robot machinery and newly-built technology office building, commercial centre some modern establishments. CSC is provided with superior location and convenient transportation, distance 170km from WUHAN to the east, and 298 kilometers from SHIYAN to the west, oriented south with HANSHI expressway, north near G316 national highway, beltway surround the plant, SUIYUE high speed way run through the city.
CSC currently with more than 500 employees, with a powerful R&D technical team staff, equipped with high tech. auto plasma cutting machine, plasma rounding machine, CNC large-scale plate bending machine, automatic jointing and welding machine. CSC with completely independent intellectual property rights of producing transit mixers, diesel and oil transporting tank trucks, bulk material transporting tank trucks, chemical liquid material transporting tank trucks, truck mounted crane, telescopic platform, trailer & semi trailers , new garbage trucks and universal used cold formed sectional steel. CSC established relationship with leading truck industrial enterprise via vertical comparison with them analysis the advantages and disadvantages, find the csc creative way domestic popular products such as the dump truck, semi-trailer have been occupied the markets all the time and got good”

Hubei Chusheng Special-purpose Vehicle Co. Ltd
No, 99
The Seventh Zone
Western End of Jiefang Road
Suizhou
Hubei
China 441300
Tel: (86 722) 3820788 (86) 13647298000
Fax: (86 722) 3820688
Mobile: (86) 13647299000
Homepage Address

http://www.globalsources.com/chusheng.co

FOTON Auman B5163 Sprinkler, adopted the qualified Sort leading imported and domestic chassis, applied in sorts road for sprinkling, spraying, temperature reduction and dust dunghill removing, moreover, available for roads conserving, Landscaping, fire fighting and drinking water transportation etc.
MAIN SPEC.:
ITEM MODEL&SPEC. MANURACTURER
SPECIAL VEHICLE Auman BJ5163 Sprinkler Hubei Cheng Longwei Special Purpose Vehicle Co., Ltd
CHASSIS BJ5163ELFGD FOTON
ENGINE Phaser180Ti PERKINS

CHASSIS TECHNIQUE PARAMETERS:
ITEM MODEL&SPEC. ITEM MODEL&SPEC.
Drive System 4×2 Exhaustion Standard EU 3/CN3
Displacement (ml)/Power(kw) 5990/ 134 Tyre & Spare Tyre Spec. 9.00-20
Gross /Rated / Kerb Mass(kg) 15800/7875/7730 No. of Leaf Springs 10/10+9
Dimension(L*W*H)(mm) 8165×2470×2830 F/R Suspension(mm) 1365/2300
Wheelbase/Axis No.(mm) 4500 Approach /Departure Angle(°) 15/15
F/R- Gearcase F/R Truck(mm) 1900/ 1800
Driver Cab Inline Narrow/ Broad Clutch
Steering-Gears Brake System
Gearbox

VEHICLE MODIFCATION TECHNIQUE INFORMATION
ITEM MODEL&SPEC. ITEM MODEL&SPEC.
Cubage(m3) 9-11 Sprinkle Height(m) ≥15
Material Carbon Steel, Stainless Steel, Aluminum-alloy, AluminumPlastic Gun Range(m) ≥30
Figure Circumference, Ellipse, Round Max Vertical Suction ≥7
Dimension(L*W*H)(mm) 5300×1800×1170 Sprinkling/Spouting Pressure 250-450KPa
Pump( Optional) Sprinkling, Fire Engine Watering 0.2-2l/
Manufacturer ID Manufacturer ID Outlet Pressure 90m
Painting Metallic Paint Water Abstract Time Consume <5min Spare Parts & Accessories Maintenance Manual, Services Stations List, Introduction, Tools Flowing 60 m3/h Introduction The vehicle modified on DFAC chassis, advantaged with its high strength rigidity chassis, hoisting pump, flank design of water adding and pumping, easy operating, large aperture is convenient of affusion, provide for a safe and comfortable condition of controlling, withal durable in use. Products feature The vehicle sprinkler system consisted of front irrigating (spouting), rear sprinkling, side showering works, elevated showering. Provided for rear foot platform equipped with high power adjustable spouting gun that rain formed of straight ,down pouring , moderate ,drizzle, spraying and also would used for crop-dusting. Parameters as: vertical section>7 M, Sprinkling range >14 M, Shooting >28 M. While such vehicle could be used for high pressure flushing, fire fighting, motive pump station etc.

Dimensions
-Type : PDS-5003
-Volume : 30-32-34-36-38-40-48 m
-Tank Meterial : ST 52 – 3
-Thickness of Tank : 4 – 5 mm
-Working Pressure : 2 Bar
-Test Pressure : 2.6 Bar
-Empty Weight : 6.500 – 9.000 Kg

TANK EQUIPMENT
-2 Units 420 mm. diameters to withstands to the test menhol cover,
-1 Unit mechanics control valve, 4″
-1 Unit air pressure manometer,
-1 Unit global jet air valve for speeding pour up,
-1 Unit left back mains powered of the truck evacuation system,
-1 Unit 2,5 Bar regulated security valve,
-Internal evacuation air splined fluid hosepipe system for cement fluidity,
-1 Unit 8100 lt / min Compresor Electric Motor, (Optional diesel motor compressor)

Chassis Accessories:
-King – Pin with 2 “ (50,8 mm) diameter under SAE and DIN standards, can be dismantled and assembled from lower part
-Trailer supports each with double sped, 25 tons dynamic, 50 tons static load capacity
-Folding rear bumper in conformity with EEC 97/19 directives having E certificate 1 unit of spare tire carrier
-Complete mudguard from hard plastic intergrated with 4 spats and 1/2 mudguard holder

Conveyor Group:
-3 unit of axle – lifting front axle each with 9 tons capacity ( Local axle or optional BPW axle)
-Z spring with Air suspensions system, 385/65 R 22.5 Tire 6+1 , 11.75 x22.5 Rim 6+1

Brake System:
-Double circuit pneumatic brake, 4S2M sensor, EBS system, automatic brake ratchets, security brake system with EEC 97/12 standards

Electrical Equipment:
Turkey and Europen Union (EU) Standarts, 24 V. – 2 Units stop lamp which has 7 functions,2 Units plate illumination lamp, Side horizontal caution lamp, Velocity plates, Reflectors,

Paint:
-Prior to dyeing cleaning with sanding method, prior to dyeing cleaning with special chemicalmixture, two layers of epoxy coat, last layer is applied two layers of furnace dyeing as to requestedcolor.

Standard Accessories:
1 unit whel wedge – 1 unit spare tire – 1 unit tool box – 1 unit water tank – 1 unit

NEVKARSAN TRAILER MANUFACTURING COMPANY LTD

- 700 m3 / h – maximum number of revolutions per minute 2000 – complete details of the operation, exhaust and intake – on all work we give warranty AUTOPRIJEVOZ JOSIP DOBRANIC Rade Koncara 71 HR – 40315 Mursko Sredisce Croatia VAT No. (OIB): 80047829947 Phone: +385 40 543 010 Fax: +385 40 544 011

Producer: CVS – Engineering
Completion: Schrauben-Kompressor
Type: SiloKing 700
Volume flow: 385 – 600 m³/h / 2.0 bar
Overpressure: bis 2.5 Bar
Speed: 2400 – 3600 U/min
Warranty: 1 Jahr
Option: 2 Jahre mit Lube 1000
Delivery time: sofort

Bülowstraße 113
D-45711 Datteln

Phone: +49 2363 38080
Fax: +49 2363 34965
eMail: info@wolf-silo.de

- 570 m3 / h

- maximum number of revolutions per minute 3600

- complete details of the operation, exhaust and intake

- on all work we give warranty

AUTOPRIJEVOZ JOSIP DOBRANIC
Rade Koncara 71
HR – 40315 Mursko Sredisce
Croatia

VAT No. (OIB): 80047829947
Phone: +385 40 543 010
Fax: +385 40 544 011

Producer: WOLF
Completion: Schraubenkompressor, neu
Type: Cw80-4
Volume flow: 430 – 580 m³/h / 2.0 bar
Overpressure: bis 2.5 Bar
Speed: 3000 – 3600 U/min
Warranty: 1 Jahr
Option: 2 Jahre mit Silöl 405
Delivery time: sofort
Type: Cw80-4 (baugleich CG80H)

Bülowstraße 113
D-45711 Datteln
Phone: +49 2363 38080
Fax: +49 2363 34965
eMail: info@wolf-silo.de

MODEL TAMKO 7200
PRESSURE (BAR) 2,5
CAPACITY (M3/MIN) 7,2
CYLINDER 4
ENGINE (HP) Deutz
DIMENSIONS (MM) -
WEIGHT (KG) -

Our company was founded in the year 1980 as having its head office in Ankara and entered into the life of production so as to perform the manufacturing of air compressors.

In the first couple of years, it started to manufacture piston typr compressors and in the same years, universal (General-purpose) benches and the manufactured parts were replaced with (CNC) computer controlled fullautomatic type bences due to the rapid development of technology.

As we closely followed the technogical developments and our understanding of quality developed in the same parallel lines, satisfaction of our customers have increased. Thanks to this innovation which minimizes the error probability, the costs have been let down increasing the number of production and such positive condition have been reflected for the utimate user.

Parallel to the developments in the Compressed Air Sector, our company has started the manufacturing of screw-type compressors within the latter years. And at the moment; by doubling the product-range with the screw-type compresors which are used and well-know in the whole world,the user given the possibility to choose among totally 57 type variable alternatives.

In our production, at the moment, various types of models, from work-shop type on-tank compressors starting from 350 Lt/min. Up to 43700 Lt/min (43,7 m ³) to electric engined fixed models and diesel engined mobile models can be produced.

Thanks to broad service and post-sale service network spread within the whole country, the possiblity of accessing the user in very short time is ensured.
We have CE and ISO:9001 Certificates.

By participating in the various abroad fair organizations with our products, presenting quality, variety, quantities, prices and post – sale services, it has been evidenced that we exist as a brand within the international market and
that we have the sufficent level of quality for com peting in every platform as a Türkiye brand.

Our aim is to contribute to the development of economical and therefore political power of our country which it needs, beginning from now on more effective especially in the abroad markets.

Main Office:
100. Yıl Bulvarı no: 50 Ostim / Ankara / Türkiye
Tel : 0090 312 354 66 22 ( PBX)
Fax: 0090 312 354 75 34
E-mail : tamsan@tamsancom.com