Description
The circular aspirators allow the cleaning of all grains and seeds, using separation by density between good grain and impurities. Thanks to the double aspiration system, this equipment allows an efficient cleaning of dry or humid grains, twice consecutively, and removes balls, hollow grains, dust and all of which is lighter than good grain.

Contact
MILESTOCK
P.O. Box 241
Saint-Bruno-de-Montarville, QC J3V 4P9
Canada
Tel: (877) 281-1582
Fax: (877) 281-1582
Email: moc.kcotselim@ofni
www.milestock.com

Description
The Kimseed High Volume Aspirator is designed to remove material from seeds and to do so quickly and efficiently. The Aspirator will separate seeds and impurities into 4 areas of the machine: Heavies: Straight Down Medium: Centre Light: Right Side Very Light: Bag Because of its precise flow adjustments separation can be extremely accurate.

Contact
Kimseed International,
4/5 Collingwood St,
Osborne Park,
6017 Western Australia
Tel: +61 (8) 9446 4377
Fax: + (8) 9446 3444
E-mail kimseed@kimseed.com.au
kimseed.com.au

Description
Adjustable Seed Aspirators and Grain Aspirators.
Seed and grain operators have come to expect the most innovative, versatile, and cost effective equipment in the business from Ag-Machinery and Safety engineers. Our adjustable aspirator is no exception to that tradition. Pre-cleaned seed and grain naturally keep better. Designed to remove stems, pods, leaves, weeds, weed seed, dust, bee’s wings and trash from milo grain sorghum, wheat soybeans, or corn before storage, our aspirator makes storage safer and simpler.
Our specially designed aspirators offer many features that make them unique in the industry. Three models give you yourchoice of two thousand, three thousand, and four thousand bushel-per-hour capacity, to precisely match your needs. Each model is quickly and easily adjusted; fine tuning the unit to clean out as much or as little as you require, at the volume at which you want to run. With the compact aspirator installed between the elevator leg discharge and consignor, the low horsepower fan and or cyclone can be mounted either aloft or on the ground.

Contact
acobs MFG, LLC.
802 N. First St.
Monticello, In. 47960
(574)583-3883 Phone
(574)583-3861 Fax
jacobs-manufacturing.com

Description
Dust and chaff extractors, capacities from 30tph to 100tph. Commercial duty over 60tph.
Aspirator pre-cleaners, capacities from 20tph to 150tph. Commercial duty over 40 tph.
Industrial quality cyclones, rotary valves and fittings available.

Contact
BDC Systems Ltd
Prospect Farm, Monxton, Andover,
Hants SP11 7DA
Tel: 01264 710 900
Fax: 01264 710987
info@bdcsystems.com
www.bdcsystems.com

Description
High Quality Grain Aspirator 63
Designed for air cleaning by aspirating light and foreign materials from samples of grains, seeds, and many free flowing granular material. Variable speed control allows the regulation of air suction intensity.

Contact
Grainman Representative
1130 NW 163 Drive
Miami, Florida, 33169
USA
Phone: 305-620-2525
Fax: 305-620-2551
E-mail: grainman@bellsouth.net
www.grainman.com

Donalsonville, GA–Lewis M. Carter Mfg. (LMC), a fourth-generation family business, has been designing and building commodity processing equipment for over 60 years.

The LMC aspirator is now finding a place in the grain industry, after having been proven in other industries.

This is an economical machine that can remove much of the dust and trash that comes in with grain, says Sales and Service Representative Marcus Carter. Its small footprint makes the LMC aspirator an excellent retrofit machine.

How it Works
The LMC aspirator works in connection with a central dust collection system. A boot at the base of the aspirator receives incoming grain, which feeds onto an inclined vibratory plate. The plate directs grain into a controlled updraft that initially pulls everything into a vertical column of air.

Dust and lightweight trash are aspirated upward, while grain and heavier materials are discharged out of the bottom.

An outfall chamber separates dust from lightweight trash, which is discarded through a rotary airlock.

Specifications
- Airflow: up to 16,000 cfm at 4,000 fpm.
- Vernier-controlled air bleed.
- Single-control air regulator.
- Optional custom configurations.

Contact;
LMC Mfg. Co., Inc.
PO Box 428
Donalsonville, GA 39845
Toll-Free 800 . 332 . 8232
Local 229 . 524 . 2197
Fax 229 . 524 . 2531
Email lmc@lmcarter.com

Aspirator ASP 750 is a machine used for preliminary cleaning and final cleaning of grain and corn to the purpose of removal of impurities by means of sieves and air flow. Aspirator is used for preliminary cleaning of after-harvest lines behind grain dryers and for final cleaning for food processing purpose in grain silos and warehouses, eventually for preparation of cereal seed for sowing in seed cleaning units

Parameter Unit Value
Length of the machine mm 3000
Width of the machine mm 2164
Height of the machine mm 2840
Mass of the machine kg 2725
Output of the machine t.hour-1 max. 25
Output of the machine t.hour-1 50-75
Power input kW 2×1,1 + 1×0,25
Humidity of the to be cleaned material % max. 18

Contacts
Gama Pardubice s.r.o.
Holandská 528
530 03 Pardubice
tel.: 466 670 070-2
fax: 466 670 073
web: www.gama-pardubice.cz
email: info@gama-pardubice.cz

The DAMAS Pulco Aspirator is efficient for both dry and moist materials. It pre-cleans and separates all forms of granular materials by the efficient use of its built-in air system. Removal of light impurities such as straw, husks, dust and chaff is easily achieved during high capacity operation.

Pneumatic Aspirators feature a floating cone design to increase cleaning efficiency. Airwashing the incoming material prior to storage eliminates unwanted foreign material in the bins (dust, chaff, pods, etc.) You get total dust control, no heat loss, less noise, no building pressures, and minimum installation costs and maintenance.

The DAMAS Lufco Aspirator is a highly efficient aspirator with built-in air recycling system for the separation of light particles from grain, seed, and other granulated material.

Lofco is unique for the separation of light products because of its highly efficient aspiration chamber iwth the newly developed turbo-technique combined with the frequency operated fan.

A doubel worm is located over the feed rollers. This worm ensures an even distribution of the material. The capacity of the machine can be adjusted by means of the feed slide at the feed, thus permitting the most efficient separation.

Lofco is an industrial, compact, and environmentally compatible construction and is easy to operate.
* Lofco is self-cleaning because of its hygienic design.
* Hitherto unknown high efficiency because of the ideal distribution of material and the turbo-technique of the Lofco.
* Lofco produces no vibration and requires very little space in relation to its capacity.
* Lofco is low-noise, requires little power and is environmentally compatible
* Lofco is optionally available with feed roller with frequency-controlled motor for speed regulation

Contact;
Can-Seed Equipment Ltd.
Toll Free Number in Canada & US: (800) 644-8397
Saskatchewan Office:
332 Packham Avenue
Saskatoon, Saskatchewan
Canada
S7N 2T1
Phone: (306) 244-2285
Fax: (306) 244-4066

Premier Scalper/Aspirators are independent units which are usually the first machine in a process flow. Many times the Premier Scalper/Aspirator will be mounted above an Indent Length Separator or other process equipment. Premier Scalper/Aspirators are used to scalp off or remove oversize material as well as an accurate winnowing or aspiration of the product to remove light material such as chaff and small seeds.

The Scalper portion of the unit consists of a wire cylinder either 12″ or 18″ in diameter and will match the width of the Aspirator portion of the unit. The length and diameter of the scalping reel will determine the overall capacity of the Scalper/Aspirator. Product Feed is controlled on the full width a with the standard rack and pinion gate, but a Gravity Feed Gate or Powered Feed Rolls are also available options. The proper wire mesh opening on the Scalping reel is chosen to let the good product and anything smaller pass through the screen, but will keep large oversize material such as straw, lumps and stones on top. The slow rotation of the Scalping Reel will remove the oversize material and discharge is out a hopper located in front of the scalping reel. After scalping, the product is exposed to an upward flowing and adjustable air flow which will lift the light material and deposit it into an expansion chamber located in behind the scalping reel. Premier Scalper/Aspirators are available either with or without internal fans and Closed Circuit units are available from ArrowCorp.

Premier Scalper/Aspirators are available in widths from 24″ to 120″ wide and have corresponding capacities of 300-5500 bushels per hour in export quality wheat.

Premier Aspirators have the same basic design as the Scalper/Aspirator but without the scalping reel to remove large oversized trash. Premier Aspirators can be used as stand alone units, or on top of Premier Indented Cylinders or Screen machines. The same widths are available in Aspirators as the Scalper/Aspirators, from 24″ wide to 120″ wide. Capacities can be higher than Scalper/Aspirators as there is now restriction caused by the time required to pass material through a scalping screen. Aspirators come equipped with a standard Rack and Pinion Feed Gate but are also available with an optional Gravity Feed Gate or Powered Feed Roll. Premier Aspirators are either with or without fans in an open circuit design or available from ArrowCorp in a Closed Circuit design.

Contact;
Premier
50 Cleveland Ave S.W.
New Brighton, MN 55112
(651) 636-7323 phone
(877) 336-7323 toll free
(651) 636-8466 fax
sales@premiergrain.net

Bjerke Brothers, Inc. Aspirators provide an effective solution for dust, fines, and chaff removal. Two basic models are available: Open Circuit which uses the external dust control system to provide a fresh air supply; and Closed Circuit which uses integral fans to provide a supply of recirculated air. In both models the air supply is pulled through the product stream to lift and separate fines from the product mass. NS Aspirators are available in widths from 24″ to 115″ and in various body styles.

Options
Fixed or variable speed feed rolls for uniform feed rate and positive shut off on selected models

Contact;
Bjerke Brothers, Inc.
P.O. Box 152
1311 162nd Ave. NE
Buxton, ND 58218
Tel:(701) 847-3125
Fax: (701) 847-2157