May
17
2012
Well Constructed Fish Skinning Machine, Steen 600
Fish Skinning Machines No comments »
Description
Fish Skinning Machine, Steen 600.
Steen ST600V 10 Skinning Machine
4 weeks Delivery
All stainless steel constructin
Will be fully refurbished.
Contact
Food Machinery Online Ltd
Estate Road No.7
South Humberside Industrial Estate
Grimsby
N.E.Lincs
DN31 2TP UK
tel. (0044) 01472 267524
fax (0044) 01472 269397
email sales@foodmachineryonline.com
http://www.foodmachineryonline.com/
2012
Improved Trio FDS 55 Fish Skinning Machine
Fish Skinning Machines No comments »
Description
The Trio FDS 55 fish skinning machine is a new and improved skinning machine built for high capacity skinning.
The FDS 55 is the land based version of a high capacity skinning machine, built for direct connection to modern filleting machines such as Baader 182, 192 or 212 or high speed pelagic filleting machines. The machine can skin up to 300 Pollack fillets a minute. The conveyor speed is about 0,8 metres per second.
Compared to older versions of the FDS 5N, this machine has clear advantages;
New knife system increases yield by 2-5%
New design for better hygiene and easier service
New and improved bearing system on drum
Choice between skin on and skin off transportation of fillets
Choice between electric or hydraulic motors
The FDS 55 is designed on a substantial steel frame made from 18/8 stainless steel. All parts that come into contact with the fish fillet are made from stainless steel or plastic.
Function of the Trio FD55 Fish Skinning Machine
The fillets are transferred automatically from the filleting machine to the conveyor belt on the Trio FDS 55. The belt passes under a rotating refrigerated drum where the skin of the fillet “freezes” to the drum. The freezing is very superficial and not deeper than 1/10mm. A rotating bandknife cuts the fillet from the skin and the skin is scraped off the drum. The thickness of the cut or the depth of the skinning, is infinitely adjustable between 0 – 12mm.
The machine has an integrated cooling system, but can also be supplied for connection to a main freezing plant, either based on freon or ammonia.
Advantages of the FDS system
The FDS machines cut the skin off the fillets in a very gentle manner. No strain is put on either the skin or the meat of the fish. This is particularly advantageous when:
Deep skinning and removal of dark meat
Skinning of fillets with no natural division between skin and meat such as mackerel
Skinning of soft fillets, or fillets with weak skin
Skinning of flatfish with no splitting of tail
Skinning of butterfly fillets such as Sardines
Techical Specifications of the Trio FDS55 Fish Skinning Machine
Operators: None when operated in line with BAADER 182/212/192
Capacity: Up to 300 Pollack fillets a minute
Conveyor Width: 330 mm
Refrigerant: R-507
Water Consumption: 2-25 L/Min
Electrical Power: 8,5 kW
Weight: 980Kg
Contact
Colga, Calry
Co. Sligo
Ireland
Tel: +353 (0)71 9147180
Fax: +353 (0)71 9147182
Loc8 Code: FBP-62-2RN
Email: sales@eddiecarr.com
http://www.eddiecarr.com/
2012
Deep Fish Skinning Machine Model 500-2A
Fish Skinning Machines No comments »
Description
1.Deep fish skinning machine Model 500-2A technology data.
This machine is suitable for skinning salmon, Pollock ,cod , flatfish , tunny tuna , flounder etc
In large quantity fish processing production line for more than 200 workers .
It is made by stainless steel .
a.Outsize: 2.6 x 1.2 x 1.5m (L X W X H)
b.Weight: 990kg,
c.conveyor speed : 20m/minute
d.3phases ,380V
e.total power: 6.3kw, ( rotating cutter motor :1.5kw ,935round/minute ,
drive motor:1.1kw ,1440round/minute , compressor motor : 3.7kw,
max run electric current : 10.6A.)
f. water supply demand : cooling water flux not less than 2 cubic meter/h
g. compressor refrigerant : R22 ; power : 5 P
FOB price USD36,000/set
shipment within 25 days after receipt of T/T payment.
L/C acceptable by adding 10% of T/T amount as bank fee , L/C confirmed by advising bank for Applicant?s account..
Machine film clip is available at buyer?s request.
Contact
Beijing HongDeTong Technology Co.,Ltd.
Add.No. 513 xibianmenxilishihao Xuanwuqu,
Beijing, China (Mainland) /100053
Tel: 86-10-51892627
Fax: 86-10-68035538
http://www.hdtfoodtech.com
2012
Best Possible Fish Gutting Machine 750
Fish Gutting Machines No comments »
Description
The new gutting machine 750 is suitable for productions wanting a quick, good, and uniform gutting of the fish. The gutting machine 750 can gut up to 40 fish per minute when it has been adjusted. With the gutting machine 750 you only have to think of feeding the machine with fish. The machine is simply constructed so that it is easy to adjust and maintain. Maintenance cost is minimal, and all wearing parts can be bought off-the-shelf.
Contact
Tecnotrans UG (h.b.) & Co.KG
P.O. Box 4132
D-49031Osnabruck
Germany
Tel:+49 -541-668 5279
Fax:+49 -541-668 7029
mail@tecnotrans-sa.com
http://www.tecnotrans-sa.com/
2012
Compact and Robust Automatic Gutting Machine with Fish Size Adjustment
Fish Gutting Machines No comments »
Description
Automatic Gutting Machine with fish size adjustment.
This compact and robust fish processing machine (for trout and bass) is made from stainless steel and plastic material. A main point at development was the removement of complicated and failing technique. The complete machine operates without hydro pneumatic or electronic elements and is driven by hydraulic pumps, which are integrated in the frame. The machine is (except a mothly oil control at a viewing glas, and the exchange of knives and brushes) nearly maintainance free. Complicated and expensive engagements are not necessary and the function via a push button allows a rentable working. Additional misstakes are impossible as wrong size selection can be avoided with the automatic niveau-regulation. The running speed of the transport chain is as low as possible, to allow to feed the machine with the fish just by one hand. A control line at the outlet side allows an optic control of the processed result, without the need to take the fish in the hand. Bad results (usually approx. 5 %) can be removed here. As the machine works without cross-cutt between gillcovers and pectoral fins, there is no additional waste of fish weight.
Contact
AquaTech
Unterbrunnweg 3
6370 Kitzbuehel
Austria
Europe
Tel: (+43)5356/71399
Fax: (+43)5356/64870
Mobil: (+43)664/1048297
Email: aquatech@a1.net
http:// www.aqua-tech.eu
2012
Reliable Fish Gutting Machine RYCO 643-P
Fish Gutting Machines No comments »
Description
FISH GUTTING MACHINE RYCO 643-P
Stock Number: 16445
Contact
Prime Machinery Group Inc
1031 Snyder Road
Lansdale, PA 19446
215-393-8770
732-960-2380
info@primemachinery.com
http://www.primemachinery.com/
2012
High Throughput Heading and Gutting Machine for Whitefish
Fish Gutting Machines No comments »
Description
Heading and Gutting Machine for Whitefish.
Heads and guts small Alaska Pollack incl. roe recovery
Compact Design
Hight troughput
Easy speed control
Contact
BAADER-Headquarter
Nordischer Maschinenbau
Rud.Baader GmbH+Co.KG
Postfach 1102
D-23501Lubeck
Germany
Tel.:+49/ 451/5302-0
Fax:+49/ 451/5302-492
http://www.baader.com/
2012
Advanced KM BREIVIK 004 Heading and Gutting Machine
Fish Gutting Machines No comments »
Description
KM BREIVIK 004 Heading and Gutting Machine
Machine that is developed to process fish with head on a standard macine from KM Fish Machinery
Dim. in mm,Breivik 005
dxlxh 760x1200x850
Additional mech. for equip KM Fish gutting machine with Breivik 005 deheading unit depth 40mm, height 620mm(approx)
Water consumption:8 l/min
Power:0,75kW
Weight:75 kg
Contact
Breivik Mek Verksted AS,
Kjopmannsgata 10,
6005 Ålesund NORWAY
Tlf / Fax +47 70 10 49 30 / +47 70 10 49 49
http://www.breivik-as.no/
2012
Stainless Steel Fish Fillet Press Machine
Fish Filleting Machines No comments »
Description
Fish Fillet Press Machine. The Fish Fillet Press was designed to stamp simulated fish fillets from frozen shingles that are cut from preformed frozen blocks. When using the shingles they are usually cut into pieces of the approximate weight and size of the fish then manually loaded into magazines on the machine. Each shingle will be automatically pulled from the hopper on demand from the machine and position to the die area for forming, once formed each fillet is discharged to a stainless steel conveyor belt for processing. Along with the automatic pre cut loader from Pierce Fisheries of Gloucester MA., it enhances the labor savings and production of the Snyder Machine Fillet Press. The yield of this machine is determined by the amount of cavities that will fit into a 24″ long mold.
We have been building this machine for over thirty years. The machines today are much improved from the older versions. Today’s machines are built with heavy steel castings. The movable head slides up and down in steel and cast iron gibbs. The head has heavy roller bearings pressing on a hardened shaft. The pusher plate is mounted onto a bronze slide. Stainless Steel guarding is done throughout the Machine which is all O.S.H.A. approved. The machine is powered with a 10 H.P. Sumitomo Variable Speed Drive, with a maximum output of approximately 45 strokes per minute. An “On & Off” switch mounted into a watertight stainless box controls this drive. The machine will have a Stainless Steel Pusher Plate and Conveyor to handle the finished product after it is formed from the press. All the mounting hardware for the molds is included. The machine is powder coated instead of galvanized.
Machine:
10 H.P. Motor
Sumitomo Variable Drive
8″ X 24″ head stamping area for mounting dies
Approved O.S.H.A Stainless Steel Guarding is done throughout the Machine
Stainless Steel Conveyor
Stainless Steel Pusher Plate
Stainless Steel Mounting Plate
Stainless Steel Mounting Hardware
Optional Reversing Switch
Contact
Snyder
Phone: 781-233-2080
Boston 781-665-6700
Fax: 781-231-3756
E-mail: smc@snydermachine.com
http://www.snydermachine.com/
2012
High-Capacity Automatic Fish Fillet Machine
Fish Filleting Machines No comments »
Description
Automatic Fish Fillet Machine
1.The fish fillet machine is main made of the stainless steel.
2.The fish belly cutter is easy to operate and high capacity.
The main parameters of the fish fillet machine:
Name:Fish Belly Cutting Machine
Applicable fishes : Large size fishes like salmon.salmon trout,yellowtail and etc
Technical Specifications of the fish belly cutting machine:
Dimensions : 800mmx 1600 mmx1600mm
Weight : 350 Kg
Material : Stainless steel
Electrical connection : 220/380V, 50/60 Hz, 3Ph
Motor : 2.2 Kw
Capacity : 15~25 Pcs/min
Features of the fish fillet machine:
1.High yield about 85~87% after head cutting to completed product because band knife can be moved according to the shape of bones.
2.Less size than existing machine by using of stainless steel and nonferrous metals that is in compliance with the regulation of HACCP.
3. Filleting can be performed precisely by centering devices when input fishes.
Contact
Zhaoqing City Tan Far Machinery Co., Ltd.
Tan Far Building,300 Meter East Side of Zhaoqing Railway Station,
Zhaoqing High Way,Zhaoqing City,
Guangdong Province, CHINA
City: Zhaoqing
Province/State: Guangdong
Country/Region: China (Mainland)
Zip: 526020
Telephone: 86-758-2802652
Mobile Phone: 00852-97422148
Fax: 86-758-2800653
http://www.tanfar.com