BDE 3504 N SC – 13 t – Roller Brake Tester
Brake Test Systems 2011
Key Features
Analogue display, double scale: indicating range 0-6 / 0-30 kN
Two-part galvanised roller set
Rollers with expanded metal mesh and wear-proof plastic coating or alternatively in SmoothGrip design
Rear rollers elevated by 30 mm
Splash-proof motors
Rust-proof feeler rolls
Measurement with wear-free strain-gauge type load cells
Electric automatic drive-off aid
Automatic test sequence
Interface for printer / PC
Determination of braking force, braking force imbalance, rolling friction, ovality
Automatic switching in and re-start
Automatic or manual modes
Cut-out at wheel lock
Permanent determination of braking force imbalance
Automatic zero adjustment
Error check routine
Automatic switching over between cars and trucks
Specifications
Brake tester Axle weight max. (t)13 Brake tester Roller diameter (mm)205 Brake tester Roller length (mm)1000 Brake tester Roller elevation (mm)30 Brake tester Roller coefficient dry / wet0.9 / 0.5 Brake tester Idling speed (km/h)2.8 Brake tester Temperature range (°C)0 – 70 Brake tester Power supply (V/Hz)400 / 50 Brake tester Supply lead (mm²)5 x 10 Brake tester Fuse rating, slow-blow (A slow-blow)3 x 50 Brake tester Motor power (kW)2 x 9.2 Brake tester Length (mm)2 x 700 Brake tester Width (mm)2 x 1225 Brake tester Height (mm)2 x 550 Brake tester Weight (kg)2 x 400 Display cabinet Measuring range (kN)0 – 6 / 0 – 30 Display cabinet Height (mm)600 Display cabinet Width (mm)800 Display cabinet Depth (mm)200 Display cabinet Weigth (kg)35
Options
Kit 4WD mode
Side-slip tester SSP 4000
Wheel / axle load weighing unit
Safety device for pit installation (mandatory for use in Germany)
Key-operated main switch, attached externally
Roller cover plates, traversable – plug-in type
Built-in frame to facilitate preparation of foundation
Pedal force measuring system
Pressure transducers
Infrared remote control
Column or swivel wall bracket for display cabinet
2-digit LED for braking force imbalance 0-99%
8-digit LED for axle load, side-slip, pedal force
PC upgrade
SP Software (TAK version)
Tacho Control
Contact;
Snap-on Equipment GmbH Testing Division
Konrad-Zuse-Straße 1
D-84579 Unterneukirchen
Tel: +49 (0)8634 / 622-0
Fax +49 (0)8634 / 5501
Tags : Axle, brake tester, expanded metal mesh, gauge type, Power, range, rear rollers, rolling friction, weight, wheel